Compartilhar via

Wdf - Verify Driver Load Order Group is not WdfLoadGroup

  • Artigo

This test verifies that WdfLoadGroup is not the Load Order Group value for the device under test.

Test details

Associated requirements

Device.DevFund.DriverFramework.AllDrivers.WDFLoadGroup

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows Server 2008 x64 Windows Server 2008 x86Windows RT 8.1Windows 8.1 x64Windows 8.1 x86Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Device.Fundamentals Reliability Testing Prerequisites.

Troubleshooting

The KMDF driver cannot use WdfLoadGroup as the LoadOrderGroup for the driver service install. WdfLoadGroup id a reserved value and cannot be used by KMDF drivers. If WdfLoadGroup is used, the test will fail with the following error: The Execute Task with Commandline cmd /c sc qc <driversvc> > query.log & type query.log | findstr -sip WdfLoadGroup Failed with ExitCode 0. For more information, see Specifying Driver Load Order.

For troubleshooting information, see Troubleshooting Device Fundamentals Reliability Testing by using the Windows HCK.

 

 

Send comments about this topic to Microsoft