Bluetooth - Downlevel - Bluetooth 2.1 Logo Tests (Windows 8)

Artigo
02/27/2017

This automated test verifies that mandatory Bluetooth 2.1 features are implemented, such as Secure Simple Pairing (SSP) and Extended Inquiry Response (EIR). Logo tests verify the previous features by running different combinations of tests on selected Bluetooth hardware.

Test details

Associated requirements	Device.BusController.Bluetooth.Base.4LeSpecification Device.BusController.Bluetooth.Base.SupportsBluetooth21AndEdr See the device hardware requirements.
Platforms	Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86)
Expected run time	~30 minutes
Categories	Certification Functional
Type	Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Bluetooth Controller Testing Prerequisites.

This test requires two test computers (one acts as Primary, the other Secondary). The test computers must have the same operating system and have a Bluetooth 2.1 compliant radio. The primary test computer must have the radio being certified for logo (Device Under Test).
The Bluetooth radio must use the Microsoft Bluetooth Driver Stack for testing.

Troubleshooting

For troubleshooting information, see Troubleshooting Bus Controller Testing.

More information

Tests are copied locally to the WTTJobsWorking directory and logs are copied to the default Logs server. This test completes the following individual test cases:

Test ID	Title	Description	Procedures	Timeout (seconds)
VerifyAuthForAuthMethOOB	Verify that authentication succeeds for authentication method OOB	Verify authentication procedure when out-of-band data is present	Master initiates the authentication. Master uses subordinate OOB data for authentication. Verify callback function registered should not be called. Verify authentication successes for authentication method OOB	100
VerifyEventLogNotGenForDebugEnabled	Verify event log message is not generated on debug system when both of the system is in debug enabled mode	Verify debug mode supported by BT radio	Master and subordinate registers for authentication. Master and subordinate is in debug mode and initiates the authentication. Verify that authentication succeeds and on no event log is generated on both computers.	120
VerifyAuthForIOCapMxSx	Verify authentication procedure for various authentication method as defined in BT specification when different IO capability is specified by system	Possible IO capabilities are as follows: DisplayOnly - 0 DisplayYesNo - 1 KeyBoardOnly - 2 NoInputNoOutput - 3	In Test names M stands for Master Device IO capability and S stands for Subordinate Device IO Capability	[This content isn't available yet.]
VerifyAuthForIOCapM0S0	Verify authentication successes for authentication method LEGACY when master and subordinate has device capability set to NoInputNoOutput	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayOnly for master and subordinate	Master and subordinate registers for authentication. Master initiates the authentication and Subordinate accepts authentication request and sent positive response. Verify that authentication succeed Warning Make sure that the correct configuration test case is executed before setting I/O capabilities	100
VerifyAuthForIOCapM0S1	Verify authentication successes for IOCapabilities DisplayOnly for master and DisplayYesNo for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayOnly for master and DisplayYesNo for subordinate	Master and subordinate registers for authentication with IOCapabilities DisplayOnly on master and DisplayYesNo on Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed	100
VerifyAuthForIOCapM0S2	Verify authentication successes for IO capabilities DisplayOnly for master and KeyboardOnly for subordinate. Warning See VerifyAuthForIOCapMxSx Tests Description	Verify authentication successes for IOCapabilities DisplayOnly for master and KeyBoardOnly for subordinate	Master and subordinate registers for authentication with IOCapabilities display only on master and Display YesNo on Subordinate. Master initiates the authentication, Subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM0S3	Verify authentication successes for IO capabilities DisplayOnly for master and NoInputNoOutput for subordinate	See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities DisplayOnly for master and NoInputNoOutput for subordinate	Master and subordinate registers for authentication with IOCapabilities display only on master and NoInputNoOutput on Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM1S0	Verify authentication successes for IO capabilities DisplayYesNo for master and DisplayOnly for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and DisplayOnly for subordinate.	Master and subordinate registers for authentication with IOCapabilities display only on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM1S1	Verify authentication successes for IO capabilities DisplayYesNo for both master and subordinate	See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities DisplayYesNo for master and subordinate.	Master and subordinate registers for authentication with IOCapabilities displayYesNo on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM1S2	Verify authentication successes for IO capability DisplayYesNo for master and KeyboardOnly for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and KeyBoardOnly for subordinate	Master and subordinate registers for authentication with IOCapabilities DisplayYesNo for master and KeyBoardOnly on SubordinateMaster initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM1S3	Verify authentication successes for IO capabilities DisplayYesNo for master and NoInputNoOutput for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and KeyBoardOnly for subordinate	Master and subordinate registers for authentication with IOCapabilities display YesNo on master and NoInputNoOutput on SubordinateMaster initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM2S0	Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayOnly for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayOnly for subordinate.	Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on master and DisplayOnly on Subordinate Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM2S1	Verify authentication successes for IOcapabilities KeyBoardOnly for master and DisplayYesNo for subordinate	See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayYesNo for subordinate	Master and subordinate registers for authentication with IOcapabilities KeyBoardOnly for master and DisplayYesNo for subordinate. Master initiates the authentication subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM2S2	Verify authentication successes for IO capabilities KeyBoardOnly for master and subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayYesNo for subordinate.	Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM2S3	Verify authentication successes for IO capabilities KeyBoardOnly for master and NoInputNoOutput for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for Master and NoInputNoOutput for subordinate.	Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on master and NoInputNoOutput on Subordinate Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM3S0	Verify authentication successes for IO capabilities NoInputNoOutput for master and DisplayOnly for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and DisplayOnly for subordinate.	Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for master and DisplayOnly for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM3S1	Verify authentication successes for IO capability NoInputNoOutput for master and DisplayYesNo for subordinate	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and DisplayYesNo for subordinate	Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for master and DislpayYesNo for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM3S2	Verify authentication successes for IO capabilities NoInputNoOutput for master and KeyBoradOnly for Subordinate.	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and KeyBoardOnly for subordinate.	Procedures: Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for Master and KeyBoardOnly for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
VerifyAuthForIOCapM3S3	Verify authentication successes for IO capabilities NoInputNoOutput for master and Subordinate.	See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and Subordinate.	Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for both Master and Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeeds.	100
EIREE1.1	Complete EIR name is present and not null	Complete EIR name is present and not null	[This content isn't available yet.]	250
EIREE1.2	Partial EIR name is present and not null	Partial EIR name is present and not null	[This content isn't available yet.]	250
EIREE1.3	Complete EIR name is present and null.	Complete EIR name is present and null	[This content isn't available yet.]	110
EIREE1.4	Partial EIR name is present and null	Partial EIR name is present and null	[This content isn't available yet.]	125

Parameters

Parameter	Description
ENABLETRACING	Enables collection of ETW traces. If True, the ETW traces are enabled on the collection. If False, the ETW traces on the collection are turned off. Default value: False

ENABLETRACING

Enables collection of ETW traces. If True, the ETW traces are enabled on the collection. If False, the ETW traces on the collection are turned off.

Default value: False

Send comments about this topic to Microsoft

Compartilhar via