Compartilhar via

WITT I2C Controller Test-Stress

  • Artigo

The Windows Inter-Integrated Circuit (I²C) Testing Tool (WITT) stress controller test verifies Windows Hardware Certification Kit (Windows HCK)Windows® Simple Peripheral Bus (SPB) compliance and reliability.

The stress test performs one-hour Stres testing on standard, fast and fast plus I²C devices, random operations/cancellations, random data and random device response (clocking stretching and NACK). Data transfer failure is expected and is ignored by the test during the time that test is checking for driver stabilities under stress.

The controller must function after one hour of stress testing. Basic write/read I/O runs at the end of the stress test.

Test details

Associated requirements

Device.BusController.I2C.CancellationOfIO Device.BusController.I2C.HCKTestability Device.BusController.I2C.LockUnlockIOCTL Device.BusController.I2C.NACK Device.BusController.I2C.SPBRead Device.BusController.I2C.SPBSequenceIOCTL Device.BusController.I2C.SPBWrite Device.BusController.I2C.Stress

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~65 minutes

Categories

Reliability

Type

Automated

 

Running the tests

Before you run the test, complete the test setup as described in the test requirements WITT I2C Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Bus Controller Testing.

Device.BusController Testing

 

 

Send comments about this topic to Microsoft