Compartilhar via

Advanced Build OS Menu Options (Windows CE 5.0)

  • Artigo

Send Feedback

The Platform Builder integrated development environment (IDE) is a thin layer over the command-line build system. This means that the Build OS menu options in the IDE are easily mappable to commands entered in a command-line prompt build window.

If you want to use a command-line prompt build window to work with an OS design, you can use these command-line equivalents to configure and run builds. As in the IDE, there are different combinations of commands and parameters that you can set for the desired outcome, such as building a run-time image.

For more information about the options available in the IDE, see Build OS Menu Options.

The following table shows the command-line equivalents for choosing Sysgen from the Build OS menu, which varies based on additional menu options that you select.

Clean Before Building Make Run-Time Image After Build Copy Files to Release Directory After Build Command
  X X 
Blddemo -q
      
Blddemo -q norel
    X 
Blddemo -q nomakeimg
X     
Blddemo clean -q norel
X   X 
Blddemo clean -q nomakeimg
X X X 
Blddemo -q clean

The following table shows the command-line equivalents for choosing Build and Sysgen from the Build OS menu, which varies based on additional menu options that you select.

Clean Before Building Make Run-Time Image After Build Copy Files to Release Directory After Build Command
  X X 
Blddemo
      
Blddemo norel
    X 
Blddemo nomakeimg
X     
Blddemo clean cleanplat -c norel
X   X 
Blddemo -c clean cleanplat nomakeimg
X X X 
Blddemo -c clean cleanplat

The following table shows the command-line equivalents for choosing Build Current BSP from the Build OS menu, which varies based on additional menu options that you select.

Clean Before Building Make Run-Time Image After Build Copy Files to Release Directory After Build Command
  X X 
set WINCREL=1&&SysgenPlatform
 %_TARGETPLATROOT% 
preproc&&cebuild1 platform
 %_PLATFORMROOT%\%_TGTPLAT%&& 
SysgenPlatform 
%_TARGETPLATROOT% 
postproc&&makeimg
      
SysgenPlatform 
%_TARGETPLATROOT% 
preproc&&cebuild1 platform
 %_PLATFORMROOT%\%_TGTPLAT%&&
 SysgenPlatform 
%_TARGETPLATROOT% postproc
    X 
set WINCREL=1&&SysgenPlatform 
%_TARGETPLATROOT% 
preproc&&cebuild1 platform
 %_PLATFORMROOT%\%_TGTPLAT%&&
 SysgenPlatform 
%_TARGETPLATROOT% postproc
X     
SysgenPlatform 
%_TARGETPLATROOT% 
preproc&&cebuild1 platform 
%_PLATFORMROOT%\%_TGTPLAT%
 -c&& SysgenPlatform 
%_TARGETPLATROOT% postproc
X   X 
set 
WINCEREL=1&&SysgenPlatform
 %_TARGETPLATROOT% 
preproc&&cebuild1 platform 
%_PLATFORMROOT%\%_TGTPLAT% 
-c&& SysgenPlatform 
%_TARGETPLATROOT% postproc
X X X 
set 
WINCEREL=1&&SysgenPlatform 
%_TARGETPLATROOT% 
preproc&&cebuild1 platform 
%_PLATFORMROOT%\%_TGTPLAT% 
-c&& SysgenPlatform 
%_TARGETPLATROOT% 
postproc&&makeimg

See Also

Build OS Menu Options | Run-Time Image Build Process | Platform Builder User Interface | Build Demo Tool | Command-Line Tools

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.