Windows CE Boot Loader Output for the SMDK2410 Samsung MCU Development Kit (Windows CE 5.0)
This is the output for the Windows CE boot loader:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 5
2004 15:36:39
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 2.4 Built Mar
5 2004
WARNING: OEMPlatformInit: Failed to initialize Smart Media.
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds.
Starting auto-download ...
System ready!
Preparing for download...
INFO: *** Device Name 'SMDK24101280' ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 157.59.29.190
ProcessDHCP()::DHCP IP Address Resolved as 157.59.29.190, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 157.59.29.190
No ARP response in 2 seconds, assuming ownership of 157.59.29.190
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
If you press the SPACEBAR to break into the configuration menu, you see the following output:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 5
2004 15:36:39
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 2.4 Built Mar
5 2004
WARNING: OEMPlatformInit: Failed to initialize Smart Media.
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 3 seconds.
Ethernet Boot Loader Configuration:
0) IP address: 0.0.0.0
1) Subnet mask: 0.0.0.0
2) DHCP: Enabled
3) Boot delay: 5 seconds
4) Reset to factory default configuration
5) Program disk image into SmartMedia card: Disabled
6) Program CS8900 MAC address
7) Low-level format the Smart Media card
D) Download image now
Enter your selection:
See Also
How to Use the BSP for the SMDK2410 Samsung MCU Development Kit
Send Feedback on this topic to the authors