SMDK2410 Samsung MCU Development Kit Supported Features (Windows CE 5.0)
The following table shows hardware components that are supported in the board support package (BSP) for the SMDK2410 Samsung MCU Development Kit. This Kit uses the Samsung S3C2410X01 RISC microprocessor based on the ARM920T core.
| Hardware component | SMDK2410 hardware support | SMDK2410 BSP support |
|---|---|---|
| RAM | Yes | Yes |
| Flash memory | Yes | Yes |
| Boot ROM | Yes | Yes |
| Timers | Yes | Yes |
| Real-time clock | Yes | Yes |
| VGA video adapter | No | No |
| LCD display | Yes | Yes |
| Ethernet port | Built-in | Ethernet port for kernel debugging only
There is no NDIS miniport driver for the Crystal CS8900A |
| Serial port | 2 | Yes |
| PC card or compact flash card | Yes | Yes |
| Secure Digital | Yes | No |
| Mouse | Universal serial bus (USB) | Yes |
| Keyboard | USB and on board | Yes |
| Hardware reset through a cold boot | Yes | Yes |
| Hardware reset through a warm boot | Yes | Yes |
| Software reset through a warm boot | Yes | Yes |
| Touch controller | Yes | Yes |
| USB host | Yes | OHCI drivers |
| USB function | Yes | No |
| Serial Infrared (SIR) | Yes | No |
| Fast Infrared (FIR) | Yes | No |
| Audio output | Onboard | Yes |
| Audio input | Onboard | Yes |
| Parallel port for printing | No | Not applicable |
| Integrated Device Electronics (IDE) | No | Not applicable |
| Smart card | No | Not applicable |
| IEEE 1394 | No | Not applicable |
| Floppy disk drive | No | Not applicable |
| TV output | No | Not applicable |
| Floating point unit | No | Not applicable |
| Expansion connector | Custom | No |
| PCI slots | No | Not applicable |
| Compact PCI or PCI extender | No | Not applicable |
| Logic analyzer probes | Yes | Yes |
| IEEE 1149.1-compliant (JTAG) | Yes | Yes |
| Debug LEDs | Yes | Yes |
| Companion or add-on cards | No | Not applicable |
| Form factor | 5V ATX | Yes |
SMDK2410 Samsung MCU Development Kit Hardware Limitations
Keep in mind the following SMDK2410 Samsung MCU Development Kit hardware limitations:
If you are experiencing flash memory problems, press down the sides of socket U10 while you adjust the NOR flash memory part, and then release pressure on the socket.
Examples of problems are if a Multi-ICE probe server application cannot write to flash memory or the boot loader image does not boot.
To avoid such problems as Multi-ICE causing the system to power down, always use the ATX power supply provided with the SMDK2410 Samsung MCU Development Kit.
There are no handshaking signals on COM1.
To use COM2 for handshaking or RAS, be sure that jumper J17 is set. For more information about the correct settings for jumper J17, see Modifying the SMDK2410 Samsung MCU Development Kit Switches and Jumpers.
See Also
How to Use the BSP for the SMDK2410 Samsung MCU Development Kit | Setting up the SMDK2410 Samsung MCU Development Kit Hardware
Send Feedback on this topic to the authors