General Firewall Rule Examples (Windows CE 5.0)
These examples show general rules that you can create for the IP Firewall.
In This Section
- Restricting Outbound Traffic to Selected TCP Ports
This rule restricts outbound traffic to selected TCP ports. - Allowing Inbound IPSec (IPv6) Traffic to Private Hosts
This rule allows inbound IPSec traffic to specific private hosts or to all private hosts. - Logging Blocked Inbound Packets
These rules log blocked inbound packets. - Creating Rules for an IPv6 Subnet
These rules apply to an IPv6 subnet. - Creating Rules Based on Time
These rules block or allow traffic based on time.
Related Sections
- Firewall Rule Examples
These examples show IP Firewall rules by protocol type, as well as general rules. - Default IP Firewall Rules
This section describes the default set of firewall rules that are required to provide security and interoperability. - FW_RULE
This structure describes a firewall rule.
Send Feedback on this topic to the authors