LINEADDRESSSTATE (Windows CE 5.0)
These bit-flag constants describe various address status items.
The following table shows the LINEADDRESSSTATE constants.
| Value | Description |
|---|---|
| LINEADDRESSSTATE_CAPSCHANGE = 0x00000100 | Indicates that, due to configuration changes made by the user or other circumstances, one or more of the members in the LINEADDRESSCAPS structure for the address have changed. The application should use the lineGetAddressCaps function to read the updated structure. If a service provider sends a LINE_ADDRESSSTATE message containing this value to TAPI, TAPI will pass it along to applications that have negotiated TAPI version 1.4 or later; applications negotiating a previous API version will receive LINE_LINEDEVSTATE messages specifying LINEDEVSTATE_REINIT, requiring them to shut down and reinitialize their connection to TAPI to obtain the updated information. |
| LINEADDRESSSTATE_DEVSPECIFIC = 0x00000002 | The device-specific item of the address status has changed. |
| LINEADDRESSSTATE_FORWARD = 0x00000040 | The forwarding status of the address has changed, including possibly the number of rings for determining a no-answer condition. The application should check the address status to determine details about the address's current forwarding status. |
| LINEADDRESSSTATE_INUSEMANY = 0x00000010 | The monitored or bridged address has changed from being in use by one station to being in use by more than one station. |
| LINEADDRESSSTATE_INUSEONE = 0x00000008 | The address has changed from idle or in use by many bridged stations to being in use by just one station. |
| LINEADDRESSSTATE_INUSEZERO = 0x00000004 | The address has changed to idle. It is not in use by any stations. |
| LINEADDRESSSTATE_NUMCALLS = 0x00000020 | The number of calls on the address has changed. This is the result of events such as a new incoming call, an outgoing call on the address, or a call changing its hold status. This flag covers changes in any of the members dwNumActiveCalls, dwNumOnHoldCalls and dwNumOnHoldPendingCalls in the LINEADDRESSSTATUS. The application should check all three of these members when it receives a LINE_ADDRESSSTATE (numCalls) message. |
| LINEADDRESSSTATE_OTHER = 0x00000001 | Address-status items other than those listed below have changed. The application should check the current address status to determine which items have changed. |
| LINEADDRESSSTATE_TERMINALS = 0x00000080 | The terminal settings for the address have changed. |
Remarks
These constants cannot be extended. All 32 bits are reserved.
An application is notified about changes to these status items in the LINE_ADDRESSSTATE message. The address's device capabilities indicate which address state changes can possibly be reported for this address.
Requirements
OS Versions: Windows CE 3.0 and later.
Header: Tapi.h.
See Also
lineGetAddressCaps | LINEADDRESSCAPS | LINEADDRESSSTATUS | LINE_ADDRESSSTATE | LINE_LINEDEVSTATE
Send Feedback on this topic to the authors