PASSWORD (Windows CE 5.0)
The PASSWORD module configures and implements client password settings for the Remote Configuration Framework.
The following table shows the configurable settings for PASSWORD.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| PasswordEmpty : DWORD | Read-only | Not applicable | If no Admin password has been set, this value will be set to 1. If an Admin password has been set, this value will not be present. |
| PasswordSet : DWORD | Read-only | Not applicable | If an Admin password has been set, this value will be set to 1. If an Admin password has not been set, this value will not be present. |
| PWD : STRING | Write-only | Not applicable | Specifies the value of the new password. |
| PWDVERIFY : STRING | Write-only | Not applicable | Specifies the verification value of the new password. |
| PWDOLD : STRING | Write-only | Not applicable | Specifies the value of the old password. |
| SECURITYLEVEL : STRING | Write-only | Not applicable | If this value is set to ENABLED, then the Web server will require authentication.
Security Note This value should always be set when the password is set. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors