Compartilhar via

SetIpForwardEntry2 (NETIOAPI) (Compact 2013)

  • Artigo

3/26/2014

This function sets the properties of an IP route entry on a local device.

Syntax

NETIOAPI_API
  SetIpForwardEntry2(
    IN const MIB_IPFORWARD_ROW2*  Route
    );

Parameters

  • Route
    A pointer to a MIB_IPFORWARD_ROW2 structure entry for an IP route entry. Your driver must set the DestinationPrefix member of the MIB_IPFORWARD_ROW2 structure to a valid IP destination prefix and family, set the NextHop member of MIB_IPFORWARD_ROW2 to a valid IP address and family, and specify the InterfaceLuid member or the InterfaceIndex member of MIB_IPFORWARD_ROW2.

Return Value

SetIpForwardEntry2 returns STATUS_SUCCESS if the function succeeds.

If the function fails, SetIpForwardEntry2 returns one of the following error codes:

Error Code

Meaning

STATUS_INVALID_PARAMETER

An invalid parameter was passed to the function. This error is returned if a NULL pointer is passed in the Route parameter, the DestinationPrefix member of the MIB_IPFORWARD_ROW2 structure that the Route parameter points to was not specified, the NextHop member of the MIB_IPFORWARD_ROW2 structure was not specified, or both InterfaceLuid and InterfaceIndex members of the MIB_IPFORWARD_ROW2 structure were unspecified.

STATUS_NOT_FOUND

The specified interface could not be found. This error is returned if the function cannot find the network interface that is specified by the InterfaceLuid or InterfaceIndex member of the MIB_IPFORWARD_ROW2 structure that the Route parameter points to.

Other

Use the FormatMessage function to obtain the message string for the returned error.

Remarks

The SetIpForwardEntry2 function is used to set the properties for an existing IP route entry on a local device.

Your driver must initialize the following members of the MIB_IPFORWARD_ROW2 structure that the Row parameter points to.

  • DestinationPrefix
    Set to a valid IPv4 or IPv6 address prefix and family.
  • NextHop
    Set to a valid IPv4 or IPv6 address and family.
  • InterfaceLuid or InterfaceIndex
    These members are used in the order that is listed earlier. So if InterfaceLuid is specified, this member is used to determine the interface. If no value was set for the InterfaceLuid member (the value of this member was set to zero), the InterfaceIndex member is next used to determine the interface.

The route metric offset that is specified in the Metric member of the MIB_IPFORWARD_ROW2 structure that Route parameter points to represents only part of the complete route metric. The complete metric is a combination of this route metric offset added to the interface metric that is specified in the Metric member of the MIB_IPINTERFACE_ROW structure of the associated interface. A driver can retrieve the interface metric by calling the GetIpInterfaceEntry (NETIOAPI) function.

SetIpForwardEntry2 ignores the Age and Origin members of the MIB_IPFORWARD_ROW2 structure that the Row parameter points to. These members are set by the network stack and cannot be changed by using the SetIpForwardEntry2 function.

The SetIpForwardEntry2 function fails if the DestinationPrefix and NextHop members of the MIB_IPFORWARD_ROW2 structure that the Route parameter points to do not match an IP route entry on the specified interface.

See Also

Reference

IP Helper Kernel-Mode Functions
CreateIpForwardEntry2 (NETIOAPI)
DeleteIpForwardEntry2 (NETIOAPI)
GetBestRoute2 (NETIOAPI)
GetIpForwardEntry2 (NETIOAPI)
GetIpForwardTable2 (NETIOAPI)
GetIpInterfaceEntry (NETIOAPI)
InitializeIpForwardEntry (NETIOAPI)
MIB_IPFORWARD_ROW2
MIB_IPFORWARD_TABLE2
MIB_IPINTERFACE_ROW
NotifyRouteChange2 (NETIOAPI)