Compartilhar via

OID_DOT11_SUPPORTED_DATA_RATES_VALUE (Compact 2013)

  • Artigo

3/26/2014

When queried, this OID requests that the miniport driver return the following for the current PHY type on the 802.11 station:

  • The transmit data rates that are supported by the Physical Layer Convergence Procedure (PLCP) and Physical Media Dependent (PMD) sublayer of the PHY
  • The receive data rates that are supported by the PLCP and PMD of the PHY

The data type for this OID is the DOT11_SUPPORTED_DATA_RATES_VALUE_V2 structure.

If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID management information base (MIB) object. This MIB object specifies the index of the current PHY type within the 802.11 station’s list of supported PHY types. For more information about msDot11CurrentPhyID, see OID_DOT11_CURRENT_PHY_ID.

Requirements

Header

windot11.h

See Also

Reference

NDIS 5.x Legacy Wireless LAN OIDs
DOT11_SUPPORTED_DATA_RATES_VALUE_V2
OID_DOT11_CURRENT_PHY_ID
NDIS 5.x Legacy Reference