Modifying the Texas Instruments SDP2420 Development Board Switches and Jumpers (Windows Embedded CE 6.0)
1/5/2010
To execute the boot loader code, modify the switches and jumpers on the Texas Instruments SDP2420 Development Board as indicated in the OMAP Software Tools documentation.
To modify the Texas Instruments SDP2420 Development Board switches and jumpers
Verify that the switches on the Texas Instruments SDP2420 Development Board mainboard are in the correct ON or OFF position.
The following table shows the correct settings for the mainboard switch labeled S1.
Switch Setting S1-1
OFF
S1-2
OFF
S1-3
ON
S1-4
ON
S1-5
ON
S1-6
OFF
S1-7
ON
S1-8
OFF
S1-9
ON
S1-10
ON
The following table shows the correct settings for the mainboard switch labeled S2.
Switch Setting S2-1
ON
S2-2
OFF
S2-3
OFF
S2-4
OFF
Verify that the switches on the Texas Instruments SDP2420 Development Board processor daughtercard are in the correct ON or OFF position.
The following table shows the correct settings for the daughtercard switch labeled SW1.
Switch Setting SW1-1
OFF
SW1-2
ON
SW1-3
OFF
SW1-4
OFF
The following table shows the correct settings for the daughtercard switch labeled SW2.
Switch Setting SW2-1
OFF
SW2-2
ON
SW2-3
ON
SW2-4
ON
The following table shows the correct settings for the daughtercard switch labeled SW3.
Switch Setting SW3-1
ON
SW3-2
ON
SW3-3
ON
SW3-4
ON
The following table shows the correct settings for the daughtercard switch labeled SW4.
Switch Setting SW4-1
OFF
SW4-2
OFF
SW4-3
ON
SW4-4
ON
The following table shows the correct settings for the daughtercard switch labeled SW5.
Switch Setting SW5-1
ON
SW5-2
OFF
SW5-3
ON
SW5-4
OFF
Verify that the switches on the Texas Instruments SDP2420 Development Board debug board (Multi-port II debug board) are in the correct ON or OFF position.
The following table shows the correct settings for the debug board switch labeled SW2.
Switch Setting SW2-1
OFF
SW2-2
OFF
SW2-3
OFF
SW2-4
OFF
The following table shows the correct settings for the debug board switch labeled SW3.
Switch Setting SW3-1
ON
SW3-2
ON
SW3-3
ON
SW3-4
ON
SW3-5
ON
SW3-6
ON
SW3-7
OFF
SW3-8
OFF
See Also
Tasks
How to Use the BSP for the Texas Instruments SDP2420 Development Board
Downloading the Boot Loader to the Texas Instruments SDP2420 Development Board