Setting up the Intel PXA27x Development Platform Hardware (MainstoneII) (Windows CE 5.0)
The following steps show you how to connect the Intel PXA27x Development Platform to a development workstation.
To set up the Intel PXA27X development platform hardware
Make sure that you have the Flash Memory Programmer (JFlashMM) software installed.
If you do not have JFlashMM installed, go to the Intel Web site and install this software before proceeding.
Make sure that you have copies of the JFlashMM platform data, .dat, files for the Intel PXA27x Development Platform.
If you do not have the .dat files for the PXA27x, go to the Intel Web site to download these files.
Make sure that you have installed the GiveIO.sys device driver, which is required for JFlashMM to work.
The GiveIO device driver is part of the JFlashMM software from Intel. For information on how to install this driver, refer to the JFlashMM release notes.
Set the Parallel Port Mode field in your BIOS to ECP + EPP.
Enhanced Parallel Port (EPP) provides support for high-speed ports for peripheral devices other than printers and scanners. Enhanced Capabilities Port (ECP) provides support for bidirectional, high-speed communication between a computer and a printer or scanner.
Connect the power cable to the device.
See Also
How to Use the BSP for the Intel PXA27x Development Platform (MainstoneII)
Send Feedback on this topic to the authors