Compartilhar via

Msvm_VLANEndpoint class

  • Artigo

Represents the VLAN endpoint of a switch port. The configuration of this endpoint will change the way the switch port sends VLAN packets through the switch.

The following syntax is simplified Managed Object Format (MOF) code, and it includes all of the inherited properties.

Syntax

[Dynamic, Provider("VmmsWmiInstanceAndMethodProvider"), AMENDMENT]
class Msvm_VLANEndpoint : CIM_VLANEndpoint
{
  string   Caption;
  string   ElementName;
  datetime InstallDate;
  string   StatusDescriptions[] = { "The service is running normally" };
  uint16   HealthState = 5;
  string   OtherEnabledState;
  uint16   RequestedState = 12;
  string   SystemCreationClassName = "Msvm_VirtualSwitch";
  string   SystemName;
  string   CreationClassName = "Msvm_VLANEndpoint";
  string   Description;
  uint16   OperationalStatus[] = 2;
  uint16   EnabledState = 5;
  datetime TimeOfLastStateChange;
  string   NameFormat;
  uint16   ProtocolType;
  uint16   ProtocolIFType = 1;
  string   OtherTypeDescription = "Virtual Ethernet";
  uint16   DesiredEndpointMode;
  uint16   OperationalEndpointMode;
  string   OtherTrunkEncapsulation;
  uint16   GVRPStatus;
  string   Status;
  uint16   EnabledDefault = 2;
  String   Name;
  boolean  BroadcastResetSupported = False;
  string   OtherEndpointMode;
  uint16   DesiredVLANTrunkEncapsulation;
  uint16   OperationalVLANTrunkEncapsulation;
  uint16   SupportedEndpointModes[];
};

Members

The Msvm_VLANEndpoint class has these types of members:

Methods

The Msvm_VLANEndpoint class has these methods.

Method Description
BroadcastReset This method is not supported.
RequestStateChange This method is not supported.

Properties

The Msvm_VLANEndpoint class has these properties.

BroadcastResetSupported

Data type: boolean

Access type: Read-only

Qualifiers: Experimental, MappingStrings ("FC-SWAPI.INCITS-T11|SWAPI_PORT_CONFIG_CAPS_T.PortForceLipSupported"), ModelCorrespondence ("CIM_ProtocolEndpoint.BroadcastReset")

Indicates whether the instrumentation supports the BroadcastReset method. This property is inherited from CIM_ProtocolEndpoint and is always set to False.

Caption

Data type: string

Access type: Read-only

Qualifiers: MaxLen (64)

A short textual description (one line string) of the object. This property is inherited from CIM_ManagedElement.

CreationClassName

Data type: string

Access type: Read-only

Qualifiers: Key, MaxLen (256)

The name of the class or the subclass used in the creation of an instance. This property is inherited from CIM_ServiceAccessPoint and is always set to "Msvm_VLANEndpoint".

Description

Data type: string

Access type: Read-only

Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifDescr")

A textual description of the object. This property is inherited from CIM_ProtocolEndpoint.

DesiredEndpointMode

Data type: uint16

Access type: Read/write

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.OperationalEndpointMode", "CIM_VLANEndpoint.OtherEndpointMode")

The desired VLAN mode that is requested for use. (Note that the current mode is given by the OperationalEndpointMode property.) This property is inherited from CIM_VLANEndpoint.

The possible values are:

DMTF Reserved (0)

Other (1)

Access (2)

The endpoint is in permanent non-trunking mode and negotiates to convert the link into a non-trunk link. The endpoint becomes a non-trunk interface.

Dynamic Auto (3)

The endpoint can convert the link to a trunk link. The endpoint becomes a trunk interface if the neighboring interface is set to trunk or desirable mode.

Dynamic Desirable (4)

The endpoint actively attempts to convert the link to a trunk link. In addition, the endpoint becomes a trunk interface if the neighboring interface is set to trunk, desirable, or auto mode. The default switch-port mode for all ethernet interfaces is dynamic desirable.

Trunk (5)

The endpoint is in permanent trunking mode and negotiates to convert the link into a trunk link. The endpoint becomes a trunk interface even if the neighboring interface is not a trunk interface.

Dot1Q Tunnel (6)

Configures the interface as a tunnel (non-trunking) endpoint to be connected in an asymmetric link with an 802.1Q trunk port. 802.1Q tunneling is used to maintain customer VLAN integrity across a service provider network.

Vendor Reserved

DesiredVLANTrunkEncapsulation

Data type: uint16

Access type: Read/write

Qualifiers: ModelCorrespondence ("CIM_VLANEndpointCapabilities.SupportsTrunkEncapsulationNegotiation", "CIM_VLANEndpoint.OperationalVLANTrunkEncapsulation", "CIM_VLANEndpoint.OtherTrunkEncapsulation")

The type of VLAN encapsulation that is requested for use. (Note that the encapsulation currently in use is given by the OperationalVLANTrunkEncapsulation property.) Note that this property is only applicable when the endpoint is operating in a trunking mode (see the OperationalEndpointMode property for additional details). This property is either 2 (Not Applicable) (that is, the endpoint will never be placed in a trunking mode), a particular type (802.1Q or Cisco ISL), or 5 (Negotiate) (that is, the result of the negotiation between this interface and its neighbor). The value, 5 (Negotiate) is not allowed if the endpoint does not support negotiation. This capability is hardware and vendor dependent. Refer to the associated CIM_VLANEndpointCapabilities.doesTrunkEncapsulationNegotiation property to validate whether a particular endpoint (port) supports encapsulation negotiation. This property is inherited from CIM_VLANEndpoint.

DMTF Reserved (0)

Other (1)

Not Applicable (2)

802.1q (3)

Cisco ISL (4)

Negotiate (5)

DMTF Reserved

6 32767

Vendor Reserved

32768 65535

ElementName

Data type: string

Access type: Read-only

A user-friendly name for the object. This property is inherited from CIM_ManagedElement.

EnabledDefault

Data type: uint16

Access type: Read/write

An administrator's default or startup configuration for the enabled state of an element. This property is inherited from CIM_EnabledLogicalElement and is always set to 2 (Enabled).

EnabledState

Data type: uint16

Access type: Read-only

Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifAdminStatus")

The enabled and disabled states of this element. This property is inherited from CIM_ProtocolEndpoint and is always set to 5 (Not Applicable).

Not Applicable (5)

The element does not support being enabled or disabled.

GVRPStatus

Data type: uint16

Access type: Read-only

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.OperationalEndpointMode, CIM_VLANEndpointCapabilities.Dot1QTagging")

Indicates whether GARP VLAN Registration Protocol (GVRP) is enabled or disabled on the trunk endpoint/port. This property is 2 (Not Applicable) unless GVRP is supported by the endpoint. This is indicated in the Capabilities property, CIM_VLANEndpointCapabilities class Dot1QTagging property. This property is applicable only when the endpoint is operating in trunking mode (determined by examining the SwitchEndpointMode property). This property is inherited from CIM_VLANEndpoint.

The possible values are:

Unknown (0)

Not Applicable (2)

Enabled (3)

Disabled (4)

HealthState

Data type: uint16

Access type: Read-only

The current health of the element. This property is inherited from CIM_ManagedSystemElement and is always set to 5 (OK).

OK (5)

The element is fully functional and operates within normal operational parameters and without error.

InstallDate

Data type: datetime

Access type: Read-only

Qualifiers: MappingStrings ("MIF.DMTF|ComponentID|001.5")

The date and time when the object was installed. This property is inherited from CIM_ManagedSystemElement and is not used.

Name

Data type: String

Access type: Read-only

Qualifiers: MaxLen (256)

A string that identifies this protocol endpoint with either a port or an interface on a device. This property is inherited from CIM_ProtocolEndpoint.

NameFormat

Data type: string

Access type: Read-only

Qualifiers: MaxLen (256)

The naming heuristic that is selected to ensure that the value of the Name property is unique. This property is inherited from CIM_ProtocolEndpoint and is not used.

OperationalEndpointMode

Data type: uint16

Access type: Read-only

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.DesiredEndpointMode", "CIM_VLANEndpoint.OtherEndpointMode")

The configuration mode for the VLAN endpoint. This property is inherited from CIM_VLANEndpoint.

The possible values are:

DMTF Reserved (0)

Other (1)

The endpoint is not VLAN aware.

Access (2)

The endpoint is in permanent non-trunking mode and negotiates to convert the link into a non-trunk link. The endpoint becomes a non-trunk interface.

Dynamic Auto (3)

The endpoint can convert the link to a trunk link. The endpoint becomes a trunk interface if the neighboring interface is set to trunk or desirable mode.

Dynamic Desirable (4)

The endpoint actively attempts to convert the link to a trunk link. In addition, the endpoint becomes a trunk interface if the neighboring interface is set to trunk, desirable, or auto mode. The default switch-port mode for all ethernet interfaces is dynamic desirable.

Trunk (5)

The endpoint is in permanent trunking mode and negotiates to convert the link into a trunk link. The endpoint becomes a trunk interface even if the neighboring interface is not a trunk interface.

Dot1Q Tunnel (6)

Configures the interface as a tunnel (non-trunking) endpoint to be connected in an asymmetric link with an 802.1Q trunk port. 802.1Q tunneling is used to maintain customer VLAN integrity across a service provider network.

DMTF Reserved

Vendor Reserved

Vendor reserved.

OperationalStatus

Data type: uint16 array

Access type: Read-only

Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifOperStatus")

The current statuses of the element. This property is inherited from CIM_ProtocolEndpoint and is always set to 2 (OK).

OK (2)

Full functionality without errors.

OperationalVLANTrunkEncapsulation

Data type: uint16

Access type: Read-only

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.OtherTrunkEncapsulation", "CIM_VLANEndpoint.DesiredVLANTrunkEncapsulation")

The type of VLAN encapsulation in use on a trunk endpoint/port. This property is either 2 (Not Applicable) (that is, the endpoint is not operating in trunking mode), a particular type (3 - 802.1Q or 4 - Cisco ISL), 5 (Negotiate) (that is, the endpoints are negotiating the encapsulation type). Note that this property is only applicable when the endpoint is operating in a trunking mode (see the OperationalEndpointMode property for additional details). This property is inherited from CIM_VLANEndpoint.

Unknown (0)

Other (1)

Not Applicable (2)

802.1q (3)

Cisco ISL (4)

Negotiating (5)

DMTF Reserved

6 32767

Vendor Reserved

32768 65535

OtherEnabledState

Data type: string

Access type: Read-only

Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")

The enabled or disabled state of the element when the EnabledState property is set to 1 (Other). This property is inherited from CIM_EnabledLogicalElement and is not used.

OtherEndpointMode

Data type: string

Access type: Read/write

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.DesiredEndpointMode", "CIM_VLANEndpoint.OperationalEndpointMode")

The type of VLAN endpoint model that is supported by this VLAN endpoint, when the value of the mode property is set to 1 (Other). This property should be set to NULL when the OperationalEndpointMode property is any value other than 1. This property is inherited from CIM_VLANEndpoint.

OtherTrunkEncapsulation

Data type: string

Access type: Read/write

Qualifiers: ModelCorrespondence ("CIM_VLANEndpoint.DesiredVLANTrunkEncapsulation", "CIM_VLANEndpoint.OperationalVLANTrunkEncapsulation")

The type of VLAN encapsulation that is supported by this VLANEndpoint, when the value of the OperationalVLANTrunkEncapsulation property is set to 1 (Other). This property should be set to NULL when the desired encapsulation property is any value other than 1. This property is inherited from CIM_VLANEndpoint.

OtherTypeDescription

Data type: string

Access type: Read-only

Qualifiers: MaxLen (64), ModelCorrespondence ("CIM_ProtocolEndpoint.ProtocolType", "CIM_ProtocolEndpoint.ProtocolIFType")

The type of protocol endpoint when the Type property of this class (or any of its subclasses) is set to 1 (Other). This property is inherited from CIM_ProtocolEndpoint and is always set to "Virtual Ethernet".

ProtocolIFType

Data type: uint16

Access type: Read-only

Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifType"), ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")

The IANA ifType MIB. This property is inherited from CIM_ProtocolEndpoint and is always set to 1 (Other).

ProtocolType

Data type: uint16

Access type: Read-only

Qualifiers: Deprecated ("CIM_ProtocolEndpoint.ProtocolIFType"), ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")

This property is inherited from CIM_ProtocolEndpoint and is not used.

RequestedState

Data type: uint16

Access type: Read-only

Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")

The last requested or desired state for the management service. This property is inherited from CIM_EnabledLogicalElement and is always set to 12 (Not Applicable).

Not Applicable (12)

Indicates that this instance does not support the RequestedState property.

Status

Data type: string

Access type: Read-only

Qualifiers: Deprecated ("CIM_ManagedSystemElement.OperationalStatus"), MaxLen (10)

The current status of the object. Operational and non-operational status can be defined. Operational status can include "OK", "Degraded", and "Pred Fail". "Pred Fail" indicates whether an element is functioning properly, but is predicting a failure (for example, a SMART-enabled hard disk drive).

Non-operational status can include "Error", "Starting", "Stopping", and "Service". "Service" can apply during disk mirror-resilvering, reloading a user permissions list, or other administrative work. Not all such work is online, but the managed element is neither "OK" nor in one of the other states.

StatusDescriptions

Data type: string array

Access type: Read-only

Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_ManagedSystemElement.OperationalStatus")

This property is inherited from CIM_ManagedSystemElement but it is not supported.

SupportedEndpointModes

Data type: uint16 array

Access type: Read-only

Qualifiers: ArrayType ("Indexed")

The endpoint mode supported by this port. This is generated dynamically.

SystemCreationClassName

Data type: string

Access type: Read-only

Qualifiers: Key, Propagated ("CIM_System.CreationClassName"), MaxLen (256)

The creation class name of the scoping system. This property is inherited from CIM_ServiceAccessPoint and is always set to "Msvm_VirtualSwitch"

SystemName

Data type: string

Access type: Read-only

Qualifiers: Key, Propagated ("CIM_System.Name"), MaxLen (256)

The system name of the scoping system. This property is inherited from CIM_ServiceAccessPoint.

TimeOfLastStateChange

Data type: datetime

Access type: Read-only

Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifLastChange")

The date or time when the enabled state of the element last changed. This property is inherited from CIM_ProtocolEndpoint and is not used.

Remarks

The Msvm_NetworkElementSettingData class is used to hold the association between the Msvm_VLANEndpoint and Msvm_VLANEndpointSettingData classes.

Access to the Msvm_VLANEndpoint class might be restricted by UAC Filtering. For more information, see User Account Control and WMI.

Examples

See Querying Networking Objects.

Requirements
Minimum supported client
 None supported
Minimum supported server
 Windows Server 2008
End of client support
 None supported
End of server support
 Windows Server 2012 R2
Namespace
 Root\Virtualization
MOF
WindowsVirtualization.mof

See also

CIM_VLANEndpoint

CIM_VLANEndpoint

Networking Classes