Msvm_SystemExportSettingData class
Associates a virtual system and its export setting data. Before calling the ExportVirtualSystemEx method of the Msvm_VirtualSystemManagementService class, an instance of Msvm_VirtualSystemExportSettingData can be retrieved using this association.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
[Association, Aggregation, Dynamic, Provider("VmmsWmiInstanceAndMethodProvider"), AMENDMENT]
class Msvm_SystemExportSettingData : CIM_ElementSettingData
{
uint16 IsDefault;
uint16 IsCurrent;
uint16 IsNext;
uint16 IsMaximum = 0;
uint16 IsMinimum = 0;
Msvm_ComputerSystem REF ManagedElement;
Msvm_VirtualSystemExportSettingData REF SettingData;
};
Members
The Msvm_SystemExportSettingData class has these types of members:
Properties
The Msvm_SystemExportSettingData class has these properties.
-
IsCurrent
-
-
Data type: uint16
-
Access type: Read-only
Indicates whether the referenced setting is currently being used by the element.
This property is inherited from CIM_ElementSettingData.
-
-
Unknown (0)
-
Is Current (1)
-
Is Not Current (2)
IsDefault
-
Data type: uint16
-
Access type: Read-only
Indicating whether the setting is a default setting for the element.
This property is inherited from CIM_ElementSettingData.
Unknown (0)
Is Default (1)
Is Not Default (2)
IsMaximum
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: Experimental
This property affects the interpretation of all non-null, non-enumerated, non-binary, numeric, non-key properties of the associated setting data instance. All other properties of the associated setting data instance are not affected by this property.
This property is inherited from CIM_ElementSettingData.
Unknown (0)
Not Applicable (1)
Is Maximum (2)
Is Not Maximum (3)
IsMinimum
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: Experimental
This property affects the interpretation of all non-null, non-enumerated, non-binary, numeric, non-key properties of the associated setting data instance. All other properties of the associated setting data instance are not affected by this property.
This property is inherited from CIM_ElementSettingData.
Unknown (0)
Not Applicable (1)
Is Minimum (2)
Is Not Minimum (3)
IsNext
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: Experimental
A flag that indicates when and how often to apply the setting.
For example, the setting could be applied on a re-initialization, reset, reconfiguration request. This could be a permanent setting, or a setting used only one time, as indicated by the flag. If it is a permanent setting then the setting is applied every time the managed element reinitializes, until this flag is manually reset. However, if it is single use, then the flag is automatically cleared after the settings are applied. In addition, if this flag is set to value other than 0 (Unknown), then this takes precedence over a SettingData property that is set to "Default".
If the managed element is a computer system, and the value of this flag is "Is Next", then the setting will be effective next time the system resets. And, unless this flag is changed, it will persist for subsequent system resets. However, if this flag is set to "Is Next For Single Use", then this setting will only be used once and the flag would be reset after that to 2 (Is Not Next). So, in the above example, if the system reboots in a quick succession, the setting will not be used at the second reboot.
This property is inherited from CIM_ElementSettingData.
Unknown (0)
Unknown.
Is Next (1)
The setting will be applied to the managed element every time the managed element is reset.
Is Not Next (2)
This setting is no longer used.
Is Next For Single Use (3)
The setting will only be applied to the managed element once, and then this flag will be set to Is Not Next (2).
ManagedElement
-
Data type: Msvm_ComputerSystem
-
Access type: Read-only
-
Qualifiers: Override ("CIM_ElementSettingData.ManagedElement")
Reference to the virtual system.
SettingData
-
Data type: Msvm_VirtualSystemExportSettingData
-
Access type: Read-only
-
Qualifiers: Override ("CIM_ElementSettingData.SettingData")
Reference to the export setting data for the virtual system.
Remarks
Access to the Msvm_SystemExportSettingData class might be restricted by UAC Filtering. For more information, see User Account Control and WMI.
Requirements
| Minimum supported client |
None supported |
| Minimum supported server |
Windows Server 2008 R2 |
| End of client support |
None supported |
| End of server support |
Windows Server 2012 R2 |
| Namespace |
Root\Virtualization |
| MOF |
|