GreMultiTenantS2SInterface class
Represents the multi-tenant S2S GRE interface
The following syntax is simplified from MOF code and includes all inherited properties.
Syntax
[ClassVersion("1.0.0"), dynamic, provider("RAMgmtPSProvider"), AMENDMENT]
class GreMultiTenantS2SInterface : GreS2SInterface
{
string Protocol;
string Destination[];
boolean AdminStatus;
string InterfaceType;
uint32 RetryInterval;
uint32 SADataSizeForRenegotiation;
uint32 SALifeTime;
string IPv6Subnet[];
string IPv4Subnet[];
string Name;
string UserName;
uint8 Certificate[];
uint32 NetworkOutageTime;
uint32 NumberOfTries;
boolean PromoteAlternate;
string AuthenticationMethod;
string ResponderAuthenticationMethod;
string EapMethod;
boolean InternalIPv4;
boolean InternalIPv6;
uint32 IdleDisconnect;
uint32 LastError;
string UnReachabilityReasons;
string ConnectionState;
string IPv4TriggerFilter[];
uint32 IPv4TriggerFilterAction;
string PostConnectionIPv4Subnet[];
string IPv6TriggerFilter[];
uint32 IPv6TriggerFilterAction;
string PostConnectionIPv6Subnet[];
boolean Persistent;
boolean InitiateConfigPayload;
uint32 EnableQoS;
uint64 TxBandwidthKbps;
uint64 RxBandwidthKbps;
string SourceIpAddress;
uint32 MMSALifeTime;
VpnTrafficSelector LocalVpnTrafficSelector[];
VpnTrafficSelector RemoteVpnTrafficSelector[];
uint32 LastDisconnectReason;
uint32 GreKey;
string IPv4Address;
string IPv6Address;
string RoutingDomain;
};
Members
The GreMultiTenantS2SInterface class has these types of members:
Properties
The GreMultiTenantS2SInterface class has these properties.
-
AdminStatus
-
-
Data type: boolean
-
Access type: Read/write
The admin status of the cmdlet.
This property is inherited from VpnS2SInterface.
-
-
AuthenticationMethod
-
-
Data type: string
-
Access type: Read/write
The authentication method to be used for the S2S connection.
This property is inherited from VpnS2SInterface.
The possible values are.
-
-
EAP ("EAP")
-
MachineCertificates ("MachineCertificates")
-
PSKOnly ("PSKOnly")
Certificate
-
Data type: uint8 array
-
Access type: Read/write
Subject Name of the certificate to be used in default store; applicable only when the authentication method is "MachineCert".
This property is inherited from VpnS2SInterface.
ConnectionState
-
Data type: string
-
Access type: Read-only
The current state of the interface, for example connected, disconnected, or unreachable.
This property is inherited from VpnS2SInterface.
Destination
-
Data type: string array
-
Access type: Read/write
The destination end-point of the S2S connection.
This property is inherited from VpnS2SInterface.
EapMethod
-
Data type: string
-
Access type: Read/write
The EAP method when the AuthenticationMethod property is "EAP".
This property is inherited from VpnS2SInterface.
The possible values are:
TLS ("TLS")
PEAP ("PEAP")
MSCHAPv2 ("MSCHAPv2")
EnableQoS
-
Data type: uint32
-
Access type: Read/write
Whether QoS is enabled on the interface.
This property is inherited from VpnS2SInterface.
Windows Server 2012: This property was renamed from QoS in Windows Server 2012 R2.
The possible values are.
(0)
Enabled
(1)
Disabled
GreKey
-
Data type: uint32
-
Access type: Read/write
The GRE Key for this connection.
This property is inherited from GreS2SInterface.
IdleDisconnect
-
Data type: uint32
-
Access type: Read/write
The duration, in seconds, after which an idle connection is terminated.
Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.
This property is inherited from VpnS2SInterface.
InitiateConfigPayload
-
Data type: boolean
-
Access type: Read/write
True to negotiate the configuration with peers; otherwise false.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
InterfaceType
-
Data type: string
-
Access type: Read/write
The type of connection.
This property is inherited from VpnS2SInterface.
The possible values are.
HomeRouter ("HomeRouter")
FullRouter ("FullRouter")
InternalIPv4
-
Data type: boolean
-
Access type: Read/write
true to negotiate the IPv4 address.
This property is inherited from VpnS2SInterface.
InternalIPv6
-
Data type: boolean
-
Access type: Read/write
true to negotiate the IPv6 address.
This property is inherited from VpnS2SInterface.
IPv4Address
-
Data type: string
-
Access type: Read/write
The IPv4 address for this connection.
This property is inherited from GreS2SInterface.
IPv4Subnet
-
Data type: string array
-
Access type: Read/write
The IPv4 subnet that is routed on this connection.
This property is inherited from VpnS2SInterface.
IPv4TriggerFilter
-
Data type: string array
-
Access type: Read/write
An array that contains the demand dial filters for the IPv4 Transport.
Windows Server 2012: This parameter is unavailable before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
IPv4TriggerFilterAction
-
Data type: uint32
-
Access type: Read/write
Whether the IPv4 trigger filters initiates the S2S connection.
This property is inherited from VpnS2SInterface.
Windows Server 2012: The data type of this property was changed from a string in Windows Server 2012 R2.
The possible values are.
(0)
Allow
(1)
Block
IPv6Address
-
Data type: string
-
Access type: Read/write
The IPv6 address for this connection.
This property is inherited from GreS2SInterface.
IPv6Subnet
-
Data type: string array
-
Access type: Read/write
The IPv6 subnet that is routed on this connection.
This property is inherited from VpnS2SInterface.
IPv6TriggerFilter
-
Data type: string array
-
Access type: Read/write
An array that contains the demand dial filters for the IPv6 Transport.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
IPv6TriggerFilterAction
-
Data type: uint32
-
Access type: Read/write
Whether the IPv6 trigger filters initiates the S2S connection.
This property is inherited from VpnS2SInterface.
Windows Server 2012: The data type of this property was changed from a string in Windows Server 2012 R2.
The possible values are.
(0)
Allow
(1)
Block
LastDisconnectReason
-
Data type: uint32
-
Access type: Read-only
The reason for the last interface disconnect.
Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.
This property is inherited from VpnS2SInterface.
LastError
-
Data type: uint32
-
Access type: Read-only
The last error value if the interface fails to connect.
This property is inherited from VpnS2SInterface.
LocalVpnTrafficSelector
-
Data type: VpnTrafficSelector array
-
Access type: Read-only
-
Qualifiers: EmbeddedInstance ("VpnTrafficSelector")
An array of local VpnTrafficSelector embedded instances to be negotiated.
Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.
This property is inherited from VpnS2SInterface.
MMSALifeTime
-
Data type: uint32
-
Access type: Read/write
Lifetime of a main mode security association (SA), after which the MM SA is no longer valid, in seconds.
Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.
This property is inherited from VpnS2SInterface.
Name
-
Data type: string
-
Access type: Read/write
The name of the connection.
This property is inherited from VpnS2SInterface.
NetworkOutageTime
-
Data type: uint32
-
Access type: Read/write
Maximum network outage time after which the connection is disconnected.
This property is inherited from VpnS2SInterface.
NumberOfTries
-
Data type: uint32
-
Access type: Read/write
Number of times the connection is retried.
This property is inherited from VpnS2SInterface.
Persistent
-
Data type: boolean
-
Access type: Read/write
True if the connection is persistent; otherwise false.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
PostConnectionIPv4Subnet
-
Data type: string array
-
Access type: Read/write
The IPv4 subnet to route
The routes specified by the subnet do not trigger the S2S connection.
Windows Server 2012: This property was renamed from IPv4DontTriggerSubnet in Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
PostConnectionIPv6Subnet
-
Data type: string array
-
Access type: Read/write
The IPv6 subnet to route
The routes specified by the subnet do not trigger the S2S connection.
Windows Server 2012: This property was renamed from IPv6DontTriggerSubnet in Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
PromoteAlternate
-
Data type: boolean
-
Access type: Read-only
Whether an alternate IP address that connects successfully becomes the primary IP address, and the current primary IP address is moved to the alternate list.
This property is inherited from VpnS2SInterface.
Protocol
-
Data type: string
-
Access type: Read/write
The underlying protocol.
This property is inherited from VpnS2SInterface.
Windows Server 2012 and Windows Server 2012 R2: The "GRE" value is not supported before Windows Server 2016.
The possible values are.
L2TP ("L2TP")
IKEv2 ("IKEv2")
Automatic ("Automatic")
GRE ("GRE")
RemoteVpnTrafficSelector
-
Data type: VpnTrafficSelector array
-
Access type: Read-only
-
Qualifiers: EmbeddedInstance ("VpnTrafficSelector")
An array of remote VpnTrafficSelector embedded instances to be negotiated.
Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.
This property is inherited from VpnS2SInterface.
ResponderAuthenticationMethod
-
Data type: string
-
Access type: Read/write
The responder authentication method to be used for the S2S connection.
This property is inherited from VpnS2SInterface.
The possible values are.
MachineCertificates ("MachineCertificates")
PSKOnly ("PSKOnly")
RetryInterval
-
Data type: uint32
-
Access type: Read/write
Number of seconds between retries.
This property is inherited from VpnS2SInterface.
RoutingDomain
-
Data type: string
-
Access type: Read-only
The routing domain friendly name
RxBandwidthKbps
-
Data type: uint64
-
Access type: Read/write
The incoming bandwidth limit of the interface.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
SADataSizeForRenegotiation
-
Data type: uint32
-
Access type: Read/write
The number of kilobytes that can be transferred using a security administration (SA). After the transfer, the SA will be renegotiated.
This property is inherited from VpnS2SInterface.
SALifeTime
-
Data type: uint32
-
Access type: Read/write
Lifetime of a security association (SA), in seconds, after which the SA is no longer valid.
This property is inherited from VpnS2SInterface.
SourceIpAddress
-
Data type: string
-
Access type: Read/write
The IP address of the interface.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
TxBandwidthKbps
-
Data type: uint64
-
Access type: Read/write
The outgoing bandwidth limit of the interface.
Windows Server 2012: This property is not available before Windows Server 2012 R2.
This property is inherited from VpnS2SInterface.
UnReachabilityReasons
-
Data type: string
-
Access type: Read-only
The reason why the interface was unreachable.
This property is inherited from VpnS2SInterface.
UserName
-
Data type: string
-
Access type: Read/write
The username to use for dialing this connection when the authentication method is set to "EAP".
This property is inherited from VpnS2SInterface.
Requirements
| Minimum supported client |
None supported |
| Minimum supported server |
Windows Server 2016 |
| Namespace |
Root\Microsoft\Windows\RemoteAccess |
| MOF |
|
| DLL |
|