Create Alert

Artigo
10/24/2013

Applies To: System Center 2012 - Orchestrator, System Center 2012 R2 Orchestrator, System Center 2012 SP1 - Orchestrator

The Create Alert activity is used in a runbook to create a new alert in System Center Operations Manager that originated from another system monitor product.

The first time you run this activity in a runbook, it installs the Orchestrator Integration Library Management Pack in System Center Operations Manager. The Create Alert activity creates an event in System Center Operations Manager, which the Orchestrator Integration Library Management Pack then translates into a System Center Operations Manager alert.

Important

When the Create Alert activity runs for the first time, it does not create an alert. The workaround is to run it again. The new alert is created after the activity is run a second time.

For the procedure to configure this object, see: Configuring the Create Alert Activity.

The following tables list the properties and published data for this activity. The activity publishes all of the data from the required and optional properties into published data. The Custom Field properties correspond to Custom Field Numbered Items in System Center Operations Manager. For example, Custom Field1 in System Center Operations Manager corresponds to CustomField1 in the Create Alert activity.

Create Alert Properties

Element	Description	Valid Values	Lookup
Description	A description of the alert that you are creating	String	No
Name	A name for the alert	String	No
Owner	The owner name that you want to assign to the alert	String	No
Priority	The priority level that you want to assign to the alert	Integer	Yes
Severity	The severity level that you want to assign to the alert	Integer	Yes
CustomField1	The value of the first custom field	String	No
CustomField2	The value of the second custom field	String	No
CustomField3	The value of the third custom field	String	No
CustomField4	The value of the fourth custom field	String	No
CustomField5	The value of the fifth custom field	String	No
CustomField6	The value of the sixth custom field	String	No
CustomField7	The value of the seventh custom field	String	No
CustomField8	The value of the eighth custom field	String	No
CustomField9	The value of the ninth custom field	String	No
CustomField10	The value of the tenth custom field	String	No

Create Alert Published Data

Element	Description
Category	The category name of the Management Pack
Connection	The connection string to the System Center Operations Manager server that you are using
ConnectorId	The ID of the connector that generated the connection string
ConnectorStatus	The status of the connector
Context	The System Center Operations Manager context of the alert
CustomField1	The value of the first custom field
CustomField2	The value of the second custom field
CustomField3	The value of the third custom field
CustomField4	The value of the fourth custom field
CustomField5	The value of the fifth custom field
CustomField6	The value of the sixth custom field
CustomField7	The value of the seventh custom field
CustomField8	The value of the eighth custom field
CustomField9	The value of the ninth custom field
CustomField10	The value of the tenth custom field
Description	The description of the alert
Domain	The domain from which the alert came
Id	The unique ID of the alert
IsMonitorAlert	Indicates whether the alert is a monitor
LastModified	The date that the alert was last modified
LastModifiedBy	The last user to modify the alert
LastModifiedByNonConnector	Indicates whether the last modification was performed by a non-connector
MaintenanceModeLastModified	The time that the monitor maintenance mode was last changed
ManagementGroup	The Management Group to which the alert belongs
ManagementGroupId	The ID of the Management Group
MonitoringClassId	The monitoring class ID of the alert
MonitoringObjectDisplayName	The display name of the System Center Operations Manager monitoring object
MonitoringObjectFullName	The full name of the System Center Operations Manager monitoring object
MonitoringObjectHealthState	The health state of the System Center Operations Manager monitoring object
MonitoringObjectId	The ID of the System Center Operations Manager monitoring object
MonitoringObjectInMaintenanceMode	Indicates whether the System Center Operations Manager monitoring object is in maintenance mode
MonitoringObjectName	The name of the System Center Operations Manager monitoring object
MonitoringObjectPath	The path of the System Center Operations Manager monitoring object
MonitoringRuleId	The ID of the System Center Operations Manager monitoring rule
Name	The name of the alert
NetbiosComputerName	The NetBIOS computer name of the computer from which the alert came
NetbiosDomainName	The NetBIOS domain name of the domain from which the alert came
Owner	The owner of the alert
Parameters	The parameters of the alert
PrincipalName	The principal name of the computer for which the alert was created
Priority	The priority level of the alert
ProblemId	The problem ID of the alert
RepeatCount	The number of times that the alert has been repeated
ResolutionState	The resolution state of the alert
ResolvedBy	The user that resolved the alert
Server	The name of the System Center Operations Manager server
Severity	The severity level of the alert
SiteName	The site name of the alert
StateLastModified	The time that the alert state was last changed
TicketId	The ticket ID of the alert
TimeAdded	The time that the alert was added to System Center Operations Manager
TimeRaised	The time that the alert was raised
TimeResolutionStateLastModified	The time that the resolution state of the alert was last changed
TimeResolved	The time that the alert was resolved
Username	The user name that was used to access the System Center Operations Manager server

Configuring the Create Alert Activity

To configure the Create Alert activity

From the Activities pane, drag a Create Alert activity to the active runbook.
Double-click the Create Alert activity icon. The Properties dialog box opens.
Configure the settings in the Details tab:
1. In the Server section, click the ellipsis button (...), and select the Operations Manager server Connection that you want to use for this activity. Click OK.
2. In the Properties section, at least one field is required to define the activity. Click Select fields. The Add/Remove Property dialog box appears. From the Available list, select the fields that you want to configure in the alert and click the Add button. The fields appear in the Selected list. When you have finished selecting fields to be updated, click OK. The fields that you selected appear in the Properties list.
3. Enter a value for each of the selected properties. If the property is Lookup-enabled, you can click the ellipsis (…) button next to the text box to browse for a value.
  
  You can also use published data to automatically populate the value of the property from the data output by a previous activity in the runbook.
  
  To use published data
  1. Right-click the property value box, click Subscribe, and then click Published Data.
  2. Click the Activity drop-down box and select the activity from which you want to obtain the data.
  3. To view additional data elements common across the runbook, select Show Common Published Data.
  4. Click the published data element you want to use, and then click OK.
    
    For a list of the data elements published by each activity, see the "Published Data" tables in the activity topic. For information about the Common Published Data items, see Published Data.
For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities.
Click Finish.

To view the Orchestrator Integration Library Management Pack in System Center Operations Manager

Open the System Center Operations Manager console. Click Administration, and then click Management Packs.

Other Activities

The Integration Pack for System Center Operations Manager contains the following additional activities:

Compartilhar via