Logical architecture components (SharePoint Foundation 2010)
Aplica-se a: SharePoint Foundation 2010
Tópico modificado em: 2015-03-09
There are various ways that you can arrange the components in a logical architecture design. Each of the components presents different opportunities for sharing and isolation. Before you start a logical architecture design, do the following:
Know what your sharing and isolation goals are.
Evaluate the tradeoffs for each choice.
Each section in this article describes a particular logical architecture component and discusses the following considerations for that component: capacity, sharing and isolation, configurable items, administration, and planning recommendations.
In this article:
Server farms
Service applications
Application pools
Web applications
Zones
Policy for a Web application
Content databases
Site collections
Sites
Host-named site collections
Server farms
A server farm represents the top-level element of a design. Individual server farms provide physical isolation.
Several criteria that are determined by your organization might affect the number of server farms that are required. They include the following:
Heavy use of services, which might warrant one or more dedicated services farms.
Separate operational divisions of responsibility.
Dedicated funding sources.
Separate data center locations.
Industry requirements for physical isolation between sites.
However, you can satisfy many isolation requirements on a single server farm. For example, you can use different Serviços de Informações da Internet (IIS) application pools with different process identities to achieve isolation at the process level for both sites and service applications.
In addition to isolation requirements that might require more than one server farm, an organization might implement multiple server farms to satisfy performance and scale goals, licensing requirements, or a publishing environment.
Service applications
A service application provides a resource that can be shared across sites within a farm or, in some cases, across multiple farms.
Microsoft SharePoint Foundation 2010 includes the infrastructure for hosting service applications, and the configuration of service offerings is flexible. Individual services can be configured independently and third parties can add services to the platform.
SharePoint Foundation 2010 includes a limited number of service applications. You can deploy only the services that are needed to a farm. The services infrastructure is extensible, and third-party companies can create additional service applications that can be used with SharePoint Foundation 2010.
Service applications are associated with Web applications. Each service application can be configured differently, as described in the following list:
Web applications can be configured to use only the services that are needed, instead of the complete set of services that are deployed.
You can deploy multiple instances of the same service in a farm and assign unique names to the resulting service applications.
You can share service applications across multiple Web applications within the same farm.
Some service applications can be shared across farms.
Capacity
There is no recommended limit for the number of service applications in a single farm.
Sharing and isolation
Service applications can be shared in the following ways:
Sharing the service application and the service data. This is the default behavior for services that are shared across Web applications. For example, search results are shared across Web applications that consume the same search application.
Sharing only the service application, but isolating the data by deploying the service in partitioned mode. In a hosted environment, you can deploy service applications in partitioned mode by using Windows PowerShell. Each tenant's data is stored in a separate partition in the database for the service. A tenant's subscription ID is used to map the tenant's service data to its sites. For example, if you deploy the search service in partitioned mode, each tenant will only see search results for its own content.
Observação
Not all service applications support partitioning.
Conversely, service applications can be isolated in the following ways:
Deploying multiple service applications in separate application pools to achieve process isolation of services and service data. For example, a finance team might warrant a separate and dedicated Business Data Connectivity application.
Deploying services in partitioned mode. This approach works well in hosted environments in which tenants will never share service data. However, it might not be practical in environments where there is a mixture of needs for shared and isolated service data.
If needed, you can also isolate service applications by deploying them to separate application pools to achieve process isolation. However, application pools are a limited resource and farm performance is affected if too many application pools are used. For more information, see Application pools in this article.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
Default group |
By default, all service applications are included in the default group. You can add and remove service applications from the default group at any time, including when you create one. When you create a Web application, you can select the default group or you can create a custom group of services. You create a custom group of services by selecting only the service applications that you want the Web application to use. |
Connection (proxy) |
When you create a service application, a connection for the service application is created at the same time. A connection is a virtual entity that connects Web applications to service applications. Some service applications store settings in the connections. In Windows PowerShell, connections are called proxies. |
Service application permissions |
You can delegate management of service applications to other users by granting them permissions to one or more of the service applications. |
Administration
Configuration and management of service applications can be delegated to administrators who specialize in managing individual services, such as search, user profiles, and managed metadata.
In a hosted environment, tenants can manage some of the service settings for their organization.
Planning recommendations
Configure service applications either to share resources across multiple Web applications or isolate content. For example, you can share the Serviço de Conectividade de Dados Corporativos across multiple Web applications or you can create separate instances of this service to dedicate to sites in a specific Web application. When you design a services strategy for an organization, consider the ways in which you can configure the individual services to increase overall content-sharing or isolation goals.
Application pools
In IIS, an application pool is a group of one or more URLs that are served by a worker process or set of worker processes.
When you create Web applications and services in Produtos do SharePoint 2010, you select an application pool to use or you can create a new application pool. Each application pool has its own worker process and can have a separate identity (security account) that prevents two processes from interacting.
Capacity
The memory overhead of an application pool is 30-50 MB plus any memory for the applications that run in the application pool process space. The various application demands usually quickly drive the memory usage of an application pool to 800 MB or larger. The limit for the number of application pools is influenced by the available memory on the system. That is, the number of application pools is dictated by the following two factors:
Available addressable memory.
The amount of memory consumed by applications that run in the application pool.
The general guideline for acceptable performance is to use eight or fewer application pools.
Sharing and isolation
IIS application pools enable multiple sites to run on the same server but still have their own worker processes and identity. This can help prevent an exploit on one site that enables the attacker to inject malicious code that can attack sites in different application pools. More importantly, this strategy isolates code that introduces memory issues or other issues so that the problematic code does not affect all applications.
Configurable items
Using a separate application pool identity for each application pool is recommended, if it is needed for security and reasons of isolation.
Administration
If separate identities are used for each application pool, each identity must be maintained.
Planning recommendations
Practically speaking, consider using a dedicated application pool for the following reasons:
To separate authenticated content from content that is primarily anonymous.
To isolate applications that store passwords for and interact with external business applications, such as Business Data Connectivity connections.
Web applications
A Web application is an IIS Web site that is created and used by Produtos do SharePoint 2010. A Web application can be extended up to four times to create four additional zones in Produtos do SharePoint 2010. This extension results in as many as five IIS Web sites that are associated with a single Web application. Each IIS Web site is associated with a different zone. You can assign each Web application a unique domain name. For more information, see Zones in this article.
Sharing and isolation
Each Web application has a unique domain name, which helps prevent cross-site scripting attacks.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
Service applications |
Service applications are associated with Web applications. When you create a Web application, you can select the default proxy group (default set of service applications), or you can specify a custom set of service applications for the Web application. All sites in a Web application consume services from the same service applications. A service application can provide services for more than one Web application. This shares content and profile data across the Web applications. |
Zones |
Within a Web application, you can create as many as five zones. Use zones to enforce different access and policy conditions for large groups of users. |
Policy for Web application |
Create a policy to enforce permissions across one or more zones in a Web application. A policy can be created for a specific user or user group. For more information, see Policy for a Web application in this article. |
Administration
Ongoing administration of Web applications is not significant.
Planning recommendations
Generally speaking, use dedicated Web applications to do the following:
Separate content available to anonymous users from content available to authenticated users.
Isolate users. For example, you can ensure that partners do not have access to intranet content by putting partner sites in a separate Web application.
Enforce permissions by using policies. For example, you can create a policy to explicitly deny write permissions to one or more groups of users. Policies for a Web application are enforced regardless of permissions configured on individual sites or documents within the Web application.
Optimize database performance. Applications achieve better performance if they are put in content databases with other applications that have similar data characteristics. For example, team sites typically consist of only a few very large sites. In contrast, personal sites might grow to be large in number but small in size. By putting these different kinds of sites in separate Web applications, the resulting databases are composed of data with similar characteristics, which optimizes database performance.
Optimize manageability. Because creating separate Web applications results in separate sites and databases, you can implement different limits for each site's Recycle Bin, expiration, and size, and negotiate different service-level agreements. For example, you might allow more time to restore sites that are not critical to your business.
Zones
Zones represent different logical paths (URLs) of gaining access to the same Web application. Within each Web application, you can create as many as five zones by using one of the available zone names: Default, Intranet, Internet, Custom, or Extranet. Each name can be selected only one time per Web application. Each zone is represented by a different Web site in IIS.
The Default zone is the zone that is first created when a Web application is created. The other zones are created by extending a Web application.
Capacity
You can create as many as five zones in a Web application. Typically, zones are coordinated across Web applications so that zones of the same name are configured for the same users.
Sharing and isolation
Zones enable you to share and isolate users in the following ways:
Authentication type Each zone can be configured to use a different authentication provider, which enables you to share the same content across partner companies.
Network zone Each zone can be configured to accommodate users who enter from a different network zone, such as an extranet or the Internet.
Policy permissions You can explicitly allow or deny read or write permissions to content per zone based on a user account or a group account.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
Authentication provider |
Each zone can be configured to use a different authentication provider. |
Anonymous access |
Turn anonymous access on or off per zone. |
Secure Sockets Layer (SSL) |
Turn SSL on or off per zone. |
Public URL and alternate access mapping |
Specify the domain name users will type to access content in the Web application. Or, use alternate access mapping to map user-friendly or zone-appropriate URLs to the default URL (server name and port) for each zone. Alternate access mapping provides support for off-box termination of SSL. Off-box termination of SSL occurs when a proxy server terminates an SSL request and then forwards the request to a Web server by using HTTP. In this case, alternate access mappings can be configured to return these requests by using SSL. This maintains secure communication between the client and the proxy server. |
Policy for Web application |
Create a unique set of policies for each zone within the Web application. If you have a special group of users who require exceptions to your overall security policy, consider using a separate zone to accommodate these users. |
Administration
If you use alternate access mapping, consider that all public URLs require Domain Name System (DNS) entries to map the public URLs to the IP address of the load balancer used for the farm.
Planning recommendations
When you design zones, several key decisions are important to the success of the deployment. These decisions include design and configuration decisions for the following zones:
The Default zone
Zones for external access
The following sections describe some planning recommendations and requirements for zones, including the Default zone.
Administrative e-mail is sent with links from the Default zone. This includes e-mail to owners of sites that are approaching quota limits. Consequently, users who receive administrative e-mail messages and alerts must be able to access links through the Default zone. This is especially important for site owners.
Host-named site collections are available only through the Default zone. All users who are intended to access host-named site collections must have access through the Default zone.
The Default zone must be the most secure zone. This is because when a user request cannot be associated with a zone, the authentication and policies of the Default zone are applied.
In an extranet environment, the design of zones is very important for the following two reasons:
User requests can be initiated from several different networks, such as the internal network, a partner company network, or the Internet.
Users consume content across multiple Web applications. For example, an intranet environment might include sites that are hosted in several different Web applications. Additionally, employees might have access to both the intranet content and to partner collaboration content.
In an extranet environment, ensure that the following design principles are followed:
Configure zones across multiple Web applications to mirror one another. The configuration of authentication and the intended users should be the same. However, the policies associated with zones can differ across Web applications. For example, ensure that the Intranet zone is used for the same employees across all Web applications. In other words, do not configure the Intranet zone for internal employees in one Web application and remote employees in another.
Configure alternate access mappings appropriately and accurately for each zone and each resource.
Policy for a Web application
A policy for a Web application enforces permissions on all content in a Web application, which enables you to set security policy for users at the Web application level. The permissions in a policy override all other security settings that are configured for sites and content.
You can configure policy based on users or user groups in Active Directory Domain Services (AD DS), but not SharePoint groups. A policy can be defined for the Web application generally or only for a specific zone.
Capacity
There are no capacity restrictions that apply to policies for Web applications.
Sharing and isolation
A policy for a Web application provides a method of setting permissions based on users and the zone through which they access content.
For example, by using a policy, you can do the following:
Allow Help desk staff access to all content.
Deny write permissions to partners or vendors.
Deny access to secure data to a group of users regardless of how site owners configure permissions.
Ensure that the crawl account has access to crawl all content.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
User policy |
Create a policy that applies to users or user groups:
You can modify the default permission levels or create new permission levels by clicking Permission Policy when you create the policy in Central Administration. |
Anonymous policy |
If anonymous access is enabled for the Web application or one or more zones, then you can create a policy that applies to all anonymous users. The default policy settings are as follows:
Anonymous user policy levels cannot be modified. |
Permission policy |
Edit the specific permissions associated with one of the default permission levels, or create a new permission policy level. Additionally, you can specify the particular permissions that are allowed or denied for site collections and sites. After creating a new permission policy level, you can create a user policy that uses the permission policy. |
Administration
Ongoing administration of policies for Web applications is not significant.
Planning recommendations
Because policies are managed centrally, consider using policies to manage large groups of users, instead of individual users.
Content databases
By default, all content for a Web application is stored in one content database. You can separate content into multiple content databases at the site collection level. A content database can include one or more site collections. A single site collection cannot span multiple databases. Backing up and restoring sites occurs at the content database level.
Capacity
The guideline for acceptable performance is to implement 100 or fewer content databases per Web application.
Sharing and isolation
Planning for databases enables you to either optimize for efficiency (multiple site collections sharing a database) or isolation (one database per site collection).
Achieve scale efficiency by managing databases to the maximum target size. In this case, you configure database settings to add new site collections to existing databases until the maximum number of site collections is reached. You calculate the maximum number of site collections by estimating the average or maximum size of site collections divided into the maximum target size for the database. This approach works well when you expect many small site collections.
Achieve isolation of content between teams or projects by limiting a database to one site collection. This approach enables you to independently manage the content of individual teams. For example, you can independently manage each team's database for backup, recovery, and migration. This approach provides the opportunity to implement different service-level agreements for different teams or projects. This approach also enables you to manage content to the life cycle of a project. For example, you can archive a database when a project is completed.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
Database server |
Specify which Microsoft SQL Server computer a content database is created on. |
Failover server |
You can choose to associate a content database with a specific failover server that is used in conjunction with SQL Server database mirroring. |
Capacity settings |
You can specify the number of sites that can be created before a Warning event is generated and the maximum number of sites that can be created in each database. |
Administration
A manageable database administration plan balances the number of databases with the resources required to manage the databases.
Administration of databases includes the following actions:
Creating new databases for new team sites or site collections that require dedicated databases.
Monitoring database sizes and creating new databases when target sizes are approached.
Backing up and restoring databases.
Planning recommendations
Choose one of the following two approaches:
Establish target sizes for content databases with appropriate size-warning thresholds. Create new databases when size-warning thresholds are reached. By using this approach, site collections are automatically added to the available database or databases, based on target sizes alone.
Associate site collections with specific content databases. This approach enables you to put one or more site collections in a dedicated database that can be managed independently from other databases.
If you want to associate site collections to specific content databases, you can use the following methods:
Use Windows PowerShell to create a site collection in a new database.
Apply the following database capacity settings on the Manage Content Database Settings page on the SharePoint Central Administration Web site:
Number of sites before a Warning event is generated = 0
Maximum number of sites that can be created in this database = 1
Add a group of site collections to a dedicated database by following these steps:
Add a content database for the Web application and ensure that the database status is set to Ready.
Set the status of all other databases to Offline. While content databases are offline, new site collections cannot be created. However, existing site collections in offline databases are still available for both read and write operations.
Create the site collections. They are automatically added to the online database.
Set the status of all other databases back to Ready.
Site collections
A site collection is a set of Web sites that have the same owner and share administration settings. Each site collection contains a top-level Web site and can contain one or more subsites.
Capacity
The recommended guideline for acceptable performance is to implement fewer than 50,000 site collections per content database. However, performance can be affected at about 10,000 site collections. Scaling out by distributing site collections across multiple database servers provides additional storage capacity and throughput.
Sharing and isolation
Site collections introduce several sharing and isolation opportunities that affect permissions, navigation, and feature deployment.
The following items can be shared within a site collection and cannot be shared across site collections (except items that are stored in a file system, such as features in the _layouts directory):
Master pages
Page layouts
Images
Site templates
Additionally, permissions and navigation are isolated at the site collection level in the following ways:
Subsites in a site collection can inherit permissions from the top-level site.
Site collections cannot inherit permissions from other site collections.
There is no built-in navigation from one site collection to another.
It is important to be aware that, although permissions are enforced on individual sites, the sites are still vulnerable to cross-site scripting attacks from other sites within the domain.
Configurable items
The following table displays configurable items that contribute to isolation and sharing.
Item |
Description |
Site collection administrator |
You can specify one user to be the primary site collection administrator and one user to be the secondary site collection administrator. In Central Administration, you cannot enter more than one account for these roles, nor can you enter a group account for these roles. |
Site template |
A site template determines which lists and features will be available on the new site. Many aspects of a site can be customized after creation. However, the site template cannot be changed after the site is created. |
Quota template |
You can apply a quota template to limit resources that are used for a site collection. The following templates are provided:
|
The following table displays configurable items in a site collection that contribute to isolation and sharing. These settings are available after you create the site collection by using the settings in the previous table.
Item |
Description |
Site collection administrators |
You can specify multiple user accounts to be site collection administrators. You cannot add group accounts. |
Permission level |
Add user and group accounts to site collections and specify permission levels for each. |
Administration
Site collection creation does not require DNS entries (unless you are creating host-named site collections) and can be easily automated or delegated to users. You can create site collections for team sites centrally, or you can let users create their own site collections by using Self-Service Site Management.
Using a dedicated database for a site collection provides the ability to perform backup and recovery at the site collection level.
Planning recommendations
Site collections bridge logical architecture and information architecture. When you design site collections, consider the following two design tasks:
Design consistent URLs across the organization.
Create logical divisions of content.
Unless you are using host-named site collections, each Web application must have a single root-level site collection. This provides a single URL path into the sites that reside in the Web application. This is also a requirement if you are implementing multiple zones within a Web application. For more information, see Host-named site collections in this article.
Many organizations plan to implement multiple site collections within a Web application for use by different teams or divisions within the organization. Common design goals include the following:
Maintain a separate and independent site collection for each team.
Create a unique URL for each team.
Isolate content between teams.
To satisfy these goals, you can use managed paths to incorporate multiple top-level site collections within a Web application. By defining managed paths, you can specify which paths in the URL namespace of a Web application are used for site collections. You can specify that one site collection or more than one site collection exists at a distinct path under the root site. Without managed paths, all sites created under the root site collection are part of the root site collection.
You can create the following two kinds of managed paths:
Explicit inclusion A site collection with the explicit URL that you assign. An explicit inclusion is applied to only one site collection. You can associate each of these site collections with a different content database if you want to manage growth and to provide the opportunity to back up and restore these sites separately. An example URL for a site collection created by using this method is http://fabrikam/hr. The limit on site collections created with an explicit inclusion is approximately 100 site collections within a Web application. However, 20 is a good operational maximum. If the organization requires more site collections, use a wildcard inclusion instead.
Wildcard inclusion A path that is added to the URL. This path indicates that all sites that are specified directly after the path name are unique site collections. This option is typically used to support Self-Service Site Management. Example URLs for site collections created by using this method are http://partnerweb/sites/project1 and http://partnerweb/sites/project2. In these examples, "http://partnerweb" represents the root-level site collection and "/sites" represents the wildcard inclusion.
Sites
A site consists of one or more related Web pages and other items (such as lists, libraries, and documents) that are hosted inside a site collection.
Capacity
The guideline for acceptable performance is to implement fewer than 250,000 sites per site collection. You can create a very large total number of Web sites by nesting the subsites. However, many nested subsites can greatly affect the time that is required to upgrade sites. A good operational target is 5,000 sites within a site collection.
Sharing and isolation
Sites include built-in navigation from one subsite to another within a site collection. There is no built-in navigation from one site collection to another.
As with site collections, separate sites are vulnerable to cross-site scripting attacks from other sites within the domain.
Configurable elements
From within each site, you can add user or group accounts to the Owners group for that site.
Administration
You can use various tools to back up and restore individual sites.
Host-named site collections
Host-named site collections are an option if you want to create multiple root-level site collections within a Web application. For example, administrators for hosting organizations use host-named site collections to create multiple domain-named sites.
There is no special mode, such as host header mode, that is required to create host-named site collections. You create host-named site collections by using Windows PowerShell. Additionally, by using Windows PowerShell, you can use managed paths with host-named site collections (New-SPManagedPath –HostHeader).
Host-named site collections give you more control over URLs. However, host-named site collections are available only through the Default zone. User accounts that are configured to authenticate through other zones cannot access host-named site collections.
In Produtos do SharePoint 2010, host-named site collections support off-box SSL termination. However, only the protocol scheme can be changed off-box (http:// or https://). The reverse proxy server cannot change the host name or the port number (except to switch from the default SSL port to the default HTTP port).
Capacity
You can create up to 100,000 host-named site collections within a single IIS Web site.
Sharing and isolation
The independent domain names that result from host-named site collections help prevent cross-site scripting attacks between two sites.
Administration
Administrative tasks for host-named site collections include the following:
Add host-named site collections by using Windows PowerShell.
Create a separate DNS entry for each host-named site collection.