MyFSD_ReadFileWithSeek
A version of this page is also available for
4/8/2010
This function reads data from a file, starting at the position indicated by the caller. After the read operation has been completed, the file pointer is adjusted by the number of bytes read. This function is called only by the OS to implement paging services on a file system.
Syntax
BOOL MyFSD_ReadFileWithSeek(
PFILE pFile,
PVOID pBuffer,
DWORD cbRead,
PDWORD pcbRead,
OVERLAPPED* pOverlapped,
DWORD dwLowOffset,
DWORD dwHighOffset
);
Parameters
- pFile
[in] Pointer to the value that a file system driver (FSD) passes to the FSDMGR_CreateFileHandle function when creating the file handle.
- pBuffer
[out] Pointer to the buffer that receives the data read from the file.
- cbRead
[in] Number of bytes to be read from the file.
- pcbRead
[out] Pointer to the number of bytes read. The ReadFile function sets this value to zero before doing any work or error checking. This parameter cannot be set to NULL.
- pOverlapped
Not supported.
- dwLowOffset
[in] Low-order part of a 64-bit address that identifies the start position for the read.
- dwHighOffset
[in] High-order part of the 64-bit address that identifies the start position of the read. Together dwLowOffset and dwHighOffset form the 64-bit address to begin the read.
Return Value
ReadFile returns when the number of bytes requested has been read or when an error occurs.
Nonzero indicates success. If the return value is nonzero and the number of bytes read is zero, the file pointer was beyond the current end of the file at the time of the read operation. Zero indicates failure. To get extended error information, call GetLastError.
Remarks
The lpOverlapped parameter must be set to NULL. The OS does not allow files to be created with the overlapped attribute.
The OS does not support asynchronous read operations on files.
The hFile parameter cannot be a socket handle.
If an FSD supports paging from the file system, this function must be implemented. If it is implemented, the pager and memory-mapped file support utilize this function. If an FSD does not support paging from the file system, the fallback position is to page the entire file into memory when a module or a file that is being mapped.
The kernel determines whether an FSD can support paging by making the following call: ReadFileWithSeek(oeptr->hf,0,0,0,0,0,0). If an FSD returns TRUE, paging is supported for the file. Otherwise, paging is not supported.
FSDMGR is a DLL that manages all OS interaction with installable files systems. Each installable file system requires an FSD, which is a DLL that supports an installable file system. The name of the DLL and the names of the functions it exports start with the name of the associated installable file system. For example, if the name of file system is MyFSD, its DLL is MyFSD.dll, and its exported functions are prefaced with MyFSD_*.
FSDMGR provides services to FSDs. The FSDMGR_RegisterVolume, the FSDMGR_CreateFileHandle, and the FSDMGR_CreateSearchHandle functions record a DWORD of volume-specific data that an FSD associates with a volume. This volume-specific data is passed as the first parameter of these three functions.
Applications that access an installable file system use standard Win32 functions. For example, when an application creates a folder on a device that contains an installable file system, it calls the CreateDirectory function. FSDMGR recognizes that the path is to a device containing an installable file system and calls the appropriate function, which in the case of the FAT file system is FATFSD_CreateDirectoryW. In other words, the application calls CreateDirectory, causing FSDMGR to call FATFSD_CreateDirectoryW.
If part of the file is locked by another process and the read operation overlaps the locked portion, this function fails.
An application must meet the following requirements when working with files opened with FILE_FLAG_NO_BUFFERING:
- File access must begin at byte offsets within the file that are integer multiples of the volume's sector size. To determine a volume's sector size, call the GetDiskFreeSpaceEx function.
- File access must be for numbers of bytes that are integer multiples of the volume's sector size. For example, if the sector size is 512 bytes, an application can request reads and writes of 512, 1024, or 2048 bytes, but not of 335, 981, or 7171 bytes.
- Buffer addresses for read and write operations must be sector-aligned on addresses in memory that are integer multiples of the volume's sector size. One way to sector-align buffers is to use the VirtualAlloc function to allocate the buffers. This function allocates memory that is aligned on addresses that are integer multiples of the system's page size. Because both page and volume sector sizes are powers of 2, memory aligned by multiples of the system's page size is also aligned by multiples of the volume's sector size.
The implementation of FILE_FLAG_NO_BUFFERING is optional and is determined by an FSD.
Accessing the input buffer while a read operation is using the buffer can corrupt the data read into that buffer. Applications must not read from, write to, reallocate, or free the input buffer that a read operation is using until the read operation completes.
When reading from a communications device, the behavior of ReadFile is governed by the current communication time-outs as set and retrieved using the SetCommTimeouts and the GetCommTimeouts functions. Unpredictable results can occur if you fail to set the time-out values.
When a synchronous read operation reaches the end of a file, ReadFile returns TRUE and sets *lpNumberOfBytesRead to zero. The following code example tests for the end of the file for a synchronous read operation.
// Attempt a synchronous read operation.
bResult = ReadFile(hFile, &inBuffer, nBytesToRead, &nBytesRead, NULL);
// Check for end of file.
if (bResult && nBytesRead == 0, )
{
// The end of the file.
}
An asynchronous read operation can encounter the end of a file during the initiating call to ReadFile or during subsequent asynchronous operations.
If end of the file is detected during an asynchronous ReadFile operation, ReadFile returns FALSE, and GetLastError returns ERROR_HANDLE_EOF.
Requirements
| Header | fsdmgr.h |
| Library | Fsdmgr.lib |
| Windows Embedded CE | Windows CE 2.10 and later |
| Windows Mobile | Windows Mobile Version 5.0 and later |
See Also
Reference
MyFSD Functions
CreateDirectory
FSDMGR_CreateFileHandle
FSDMGR_CreateSearchHandle
FSDMGR_RegisterVolume
MyFSD_CreateFileW
MyFSD_WriteFile
ReadFile