Editar

Compartilhar via

Start-AzDataProtectionBackupInstanceRestore

  • Reference
Module:
Az.DataProtection

Triggers restore for a BackupInstance

Syntax

Start-AzDataProtectionBackupInstanceRestore
     -ResourceGroupName <String>
     -BackupInstanceName <String>
     -VaultName <String>
     -Parameter <IAzureBackupRestoreRequest>
     [-SubscriptionId <String>]
     [-ResourceGuardOperationRequest <String[]>]
     [-Token <String>]
     [-SecureToken <SecureString>]
     [-RestoreToSecondaryRegion]
     [-DefaultProfile <PSObject>]
     [-AsJob]
     [-NoWait]
     [-WhatIf]
     [-Confirm]
     [<CommonParameters>]
Start-AzDataProtectionBackupInstanceRestore
     -ResourceGroupName <String>
     -BackupInstanceName <String>
     -VaultName <String>
     [-SubscriptionId <String>]
     [-ResourceGuardOperationRequest <String[]>]
     [-Token <String>]
     [-SecureToken <SecureString>]
     [-RestoreToSecondaryRegion]
     [-DefaultProfile <PSObject>]
     [-AsJob]
     [-NoWait]
     -ObjectType <String>
     -RestoreTargetInfo <IRestoreTargetInfoBase>
     -SourceDataStoreType <SourceDataStoreType>
     [-IdentityDetailUserAssignedIdentityArmUrl <String>]
     [-IdentityDetailUseSystemAssignedIdentity]
     [-SourceResourceId <String>]
     [-WhatIf]
     [-Confirm]
     [<CommonParameters>]

Description

Triggers restore for a BackupInstance

Examples

Example 1: Trigger restore for a protected azure disk.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxx-xxx-xxx" -ResourceGroupName "sarath-rg" -VaultName "sarath-vault"
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxx-xxx-xxx" -ResourceGroupName "sarath-rg" -VaultName "sarath-vault" -BackupInstanceName $instance.Name
$restoreRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureDisk -SourceDataStore OperationalStore -RestoreLocation "westus"  -RestoreType AlternateLocation -TargetResourceId "/subscriptions/{subscriptionId}/resourceGroups/{resourceGroup}/providers/Microsoft.Compute/disks/{DiskName}" -RecoveryPoint $rp[0].name
Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instance.BackupInstanceName -ResourceGroupName sarath-rg -VaultName sarath-vault -SubscriptionId "xxx-xxx-xxx" -Parameter $restorerequest

Example 2: Trigger restore as DB for protected AzureDatabaseForPostgreSQL using secret store.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$targetResourceId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/resourceGroupName/providers/Microsoft.DBforPostgreSQL/servers/serverName/databases/targetDbName"
$secretURI = "https://oss-keyvault.vault.azure.net/secrets/oss-secret"
$restoreRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureDatabaseForPostgreSQL -SourceDataStore VaultStore -RestoreLocation "westus" -RestoreType AlternateLocation -TargetResourceId $targetResourceId -RecoveryPoint $rp[0].Property.RecoveryPointId -SecretStoreURI $secretURI -SecretStoreType AzureKeyVault
$restoreJob = Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instance.BackupInstanceName -ResourceGroupName resourceGroupName -VaultName vaultName -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -Parameter $restorerequest
$jobid = $restoreJob.JobId.Split("/")[-1]
$jobstatus = "InProgress"
while($jobstatus -ne "Completed")
{
    Start-Sleep -Seconds 10
    $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"
    $jobstatus = $currentjob.Status
}

The first, second commands fetch the instance and recovery point for the instance. The third command initializes the $targetResourceId with the Id of target postgre database (targetDbName should be the new database name). The fourth command initializes the secret URI. The fifth, sixth command initializes and triggers the restore request for AzureDatabaseForPostgreSQL with secret store. The seventh, eight, ninth commands track the restore job to completion.

Example 3: Trigger restore as files for protected AzureDatabaseForPostgreSQL.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$targetContainerURI = "https://targetStorageAccount.blob.core.windows.net/targetContainerName"
$fileNamePrefix = "restore_as_files_12345"
$restoreRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureDatabaseForPostgreSQL -SourceDataStore VaultStore -RestoreLocation "westus" -RestoreType RestoreAsFiles -RecoveryPoint $rp[0].Property.RecoveryPointId -TargetContainerURI $targetContainerURI -FileNamePrefix $fileNamePrefix
$restoreJob = Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instance.BackupInstanceName -ResourceGroupName resourceGroupName -VaultName vaultName -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -Parameter $restorerequest
$jobid = $restoreJob.JobId.Split("/")[-1]
$jobstatus = "InProgress"
while($jobstatus -ne "Completed")
{
    Start-Sleep -Seconds 10
    $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"
    $jobstatus = $currentjob.Status
}

The first, second commands fetch the instance and recovery point for the instance. The third command initializes the $targetContainerURI with the Id of target storage account container. The fourth command initializes the file name prefix for restore. The fifth, sixth command initializes and triggers the restore request for AzureDatabaseForPostgreSQL with secret store. The seventh, eight, ninth commands track the restore job to completion.

Example 4: Trigger restore as Files for protected AzureKubernetesService.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"  | Where-Object { $_.Name -match "aks-cluster-name" }
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$aksRestoreCriteria = New-AzDataProtectionRestoreConfigurationClientObject -DatasourceType AzureKubernetesService  -PersistentVolumeRestoreMode RestoreWithVolumeData -IncludeClusterScopeResource $true -NamespaceMapping  @{"sourceNamespace1"="targetNamespace1";"sourceNamespace2"="targetNamespace2"}
$snapshotResourceGroupId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/snapshotResourceGroup"
$aksOLRRestoreRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureKubernetesService -SourceDataStore OperationalStore -RestoreLocation eastus -RestoreType OriginalLocation -RecoveryPoint $rps[0].Property.RecoveryPointId -RestoreConfiguration $aksRestoreCriteria -BackupInstance $instance 

Set-AzDataProtectionMSIPermission -VaultResourceGroup "resourceGroupName" -VaultName "vaultName" -PermissionsScope "ResourceGroup" -RestoreRequest $aksOLRRestoreRequest -SnapshotResourceGroupId $snapshotResourceGroupId
$validateRestore = Test-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -RestoreRequest $aksOLRRestoreRequest -Name $instance.BackupInstanceName
$restoreJob = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $aksOLRRestoreRequest

The first, second commands fetch the instance and recovery point for the instance. The third command initializes the Restore Configuration client object used to initialize restore request client object. The fourth command initializes the snapshot resource group Id. The fifth command initializes the restore request object for AzureKubernetesService restore. The sixth command assigns the permissions to the backup vault and target AKS cluster necessary for triggering the restore for AzureKubernetesService. The last command triggers the restore for AzureKubernetesService.

Example 5: Trigger restore for vaulted blobs.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" | Where-Object { $_.Name -match "storageAcountName" }
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$backedUpContainers = $instance.Property.PolicyInfo.PolicyParameter.BackupDatasourceParametersList[0].ContainersList
$restoreReq = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureBlob -SourceDataStore VaultStore -RestoreLocation "vaultLocation" -RecoveryPoint $rp[0].Name -ItemLevelRecovery -RestoreType AlternateLocation -TargetResourceId "targetStorageAccountId" -ContainersList $backedUpContainers[0,1]
Test-AzDataProtectionBackupInstanceRestore -Name $instance[0].Name -ResourceGroupName "resourceGroupName" -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -VaultName "vaultName" -RestoreRequest $restoreReq
$restoreJob = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $restoreReq

The first, second commands fetch the instance and recovery point for the instance. The third command fetches the containers which are protected with vaulted policy. The fourth command initializes the restore request object for AzureBlob restore. The fifth command triggers validate before restore. The last command triggers the restore for vaulted blob containers.

Example 6: Trigger cross subscription restore for vaulted blobs.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" | Where-Object { $_.Name -match "storageAcountName" }
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$backedUpContainers = $instance.Property.PolicyInfo.PolicyParameter.BackupDatasourceParametersList[0].ContainersList
$targetCrossSubscriptionStorageAccountId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/resourceGroupName/providers/Microsoft.Storage/storageAccounts/targetStorageAccount"
$restoreReqCSR = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureBlob -SourceDataStore VaultStore -RestoreLocation "vaultLocation" -RecoveryPoint $rp[0].Name -ItemLevelRecovery -RestoreType AlternateLocation -TargetResourceId $targetCrossSubscriptionStorageAccountId -ContainersList $backedUpContainers[0,1]
Test-AzDataProtectionBackupInstanceRestore -Name $instance[0].Name -ResourceGroupName "resourceGroupName" -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -VaultName "vaultName" -RestoreRequest $restoreReqCSR
$restoreJobCSR = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $restoreReqCSR

The first, second commands fetch the instance and recovery point for the instance. The third command fetches the containers which are protected with vaulted policy. The fourth command initializes the target cross subscription storage account Id. The fifth command initializes the restore request object for cross subscription AzureBlob restore. The sixth command triggers validate before restore. The last command triggers cross subscription restore for vaulted blob containers.

Example 7: Trigger cross subscription restore as files for AzureDatabaseForPostgreSQL.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" | Where-Object { $_.Property.DataSourceInfo.ResourceType -match "Postgre" }
$rp = Get-AzDataProtectionRecoveryPoint -BackupInstanceName $instance[0].BackupInstanceName -ResourceGroupName "resourceGroupName" -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -VaultName "vaultName"
$targetResourceArmId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/crossSubResourceGroupName/providers/Microsoft.Storage/storageAccounts/akneemasaecy/blobServices/default/containers/oss-csr-container"
$targetContainerURI =  "https://akneemasaecy.blob.core.windows.net/oss-csr-container"
$fileNamePrefix = "oss-csr-pstest-restoreasfiles"
$ossRestoreReqFiles = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureDatabaseForPostgreSQL -SourceDataStore VaultStore -RestoreLocation "vaultLocation" -RestoreType RestoreAsFiles -RecoveryPoint $rp[0].Property.RecoveryPointId -TargetContainerURI $targetContainerURI -FileNamePrefix $fileNamePrefix -TargetResourceIdForRestoreAsFile $targetContainerArmId
$validateRestore = Test-AzDataProtectionBackupInstanceRestore -Name $instance[0].Name -ResourceGroupName "resourceGroupName" -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -VaultName "vaultName" -RestoreRequest $ossRestoreReqFiles
$restoreJobCSR = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $ossRestoreReqFiles
$jobid = $restoreJobCSR.JobId.Split("/")[-1]
$jobstatus = "InProgress"
while($jobstatus -ne "Completed")
{
    Start-Sleep -Seconds 10
    $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"
    $jobstatus = $currentjob.Status
}

The first, second commands fetch the backup instance and recovery point for the backup instance. The third command initializes the ARM Id for target container. This parameter is needed for vaults where cross subscription restore is disabled and optional for CSR enabled vaults. The fourth, fifth command initializes targetContainerURI and fileNamePrefix for restore. The sixth command initializes the restore request object for AzureDatabaseForPostgreSQL restore. The seventh command triggers validate before restore. The last command triggers the cross subscription restore as files for AzureDatabaseForPostgreSQL.

Example 8: Trigger cross region restore for AzureDatabaseForPostgreSQL.

$restoreJobCRR = Start-AzDataProtectionBackupInstanceRestore -BackupInstanceName $instance.Name -ResourceGroupName $ResourceGroupName -VaultName $vaultName -SubscriptionId $SubscriptionId -Parameter $OssRestoreReq -RestoreToSecondaryRegion
$jobid = $restoreJobCRR.JobId.Split("/")[-1]
$jobstatus = "InProgress"
while($jobstatus -ne "Completed")
{
    Start-Sleep -Seconds 10
    $currentjob = Get-AzDataProtectionJob -Id $jobid -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -UseSecondaryRegion
    $jobstatus = $currentjob.Status
}

This command command triggers the cross region restore for AzureDatabaseForPostgreSQL. For triggering cross region restore to secondary region, use RestoreToSecondaryRegion switch.

Example 9: Trigger restore as Files for datasource type AzureDatabaseForPGFlexServer, AzureDatabaseForMySQL.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName"  | Where-Object { $_.Name -match "test-pgflex" }
$rps = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$targetContainerURI = "https://teststorageaccount.blob.core.windows.net/powershellpgflexrestore"
$storageAccId = (Get-AzStorageAccount -ResourceGroupName "teststorageaccountRG" -Name "teststorageaccount").Id
$pgFlexRestoreAsFilesRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureDatabaseForPGFlexServer -SourceDataStore VaultStore -RestoreLocation $vault.Location -RestoreType RestoreAsFiles -RecoveryPoint $rps[0].Property.RecoveryPointId -TargetContainerURI $targetContainerURI
Set-AzDataProtectionMSIPermission -VaultResourceGroup "resourceGroupName" -VaultName "vaultName" -PermissionsScope "ResourceGroup" -RestoreRequest $pgFlexRestoreAsFilesRequest -DatasourceType AzureDatabaseForPGFlexServer -SubscriptionId $SubscriptionId -StorageAccountARMId $storageAccId
$validateRestore = Test-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -RestoreRequest $pgFlexRestoreAsFilesRequest -Name $instance.BackupInstanceName
$restoreJob = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $pgFlexRestoreAsFilesRequest

The first, second commands fetch the instance and recovery point for the instance. The third and fourthcommand initializes the target container id and target storage account ARM id. The fifth command initializes the restore request object for AzureDatabaseForPGFlexServer restore. This example also works for datasource type AzureDatabaseForMySQL. The sixth command assigns the permissions to the backup vault and other permissions necessary for triggering the restore for AzureDatabaseForPGFlexServer. The last command triggers the restore for AzureDatabaseForPGFlexServer.

Example 10: Trigger vaulted backup conatiners ItemLevelRestore with PrefixMatch for Azureblob.

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" | Where-Object { $_.Name -match "storageAcountName" }
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.Name
$backedUpContainers = $instance.Property.PolicyInfo.PolicyParameter.BackupDatasourceParametersList[0].ContainersList
$prefMatch = @{
    $backedUpContainers[0] = @("Su", "PS")
    $backedUpContainers[1]= @("meta", "coll", "Su")
}
$targetStorageAccountId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/resourceGroupName/providers/Microsoft.Storage/storageAccounts/targetStorageAccount"
$restoreReqILR = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureBlob -SourceDataStore VaultStore -RestoreLocation "vaultLocation" -RecoveryPoint $rp[0].Name -ItemLevelRecovery -RestoreType AlternateLocation -TargetResourceId $targetStorageAccountId -ContainersList $backedUpContainers[0,1] -PrefixMatch $prefMatch
Test-AzDataProtectionBackupInstanceRestore -Name $instance[0].Name -ResourceGroupName "resourceGroupName" -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -VaultName "vaultName" -RestoreRequest $restoreReqILR
$restoreJobILR = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" -ResourceGroupName "resourceGroupName" -VaultName "vaultName" -BackupInstanceName $instance.BackupInstanceName -Parameter $restoreJobILR

The first, second commands fetch the instance and recovery point for the instance. The third command fetches the containers which are protected with vaulted policy. The fourth command initializes the prefix array for each container. PrefixMatch is a hashtable where each key is the conatiner name being restored and the value is a list of string prfixes for container names for Item level recovery. The fifth command initializes the target storage account Id. The sixth command initializes the restore request object for AzureBlob restore with parameters ContainersList, PrefixMatch. The seventh command triggers validate before restore. The last command triggers prefix match Item level restore for vaulted blob containers.

Example 11: Trigger alternate location vaulted restore for AzureKubernetesService

$subId = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
$resourceGroupName = "resourceGroupName"
$vaultName = "vaultName" 
$location = "eastasia"
$snapshotResourceGroupId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/stagingRG"
$stagingStorageAccount = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/stagingRG/providers/Microsoft.Storage/storageAccounts/snapshotsa"
$targetAKSClusterARMId = "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/targetRG/providers/Microsoft.ContainerService/managedClusters/targetKubernetesCluster"

$instance = Get-AzDataProtectionBackupInstance -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName | Where-Object { $_.Name -match "aks-cluster-name" }
$rp = Get-AzDataProtectionRecoveryPoint -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName -BackupInstanceName $instance.Name

 $aksRestoreCriteria = New-AzDataProtectionRestoreConfigurationClientObject -DatasourceType AzureKubernetesService  -PersistentVolumeRestoreMode RestoreWithVolumeData -IncludeClusterScopeResource $true -StagingResourceGroupId $snapshotResourceGroupId -StagingStorageAccountId $stagingStorageAccount -IncludedNamespace "hrweb" -NamespaceMapping @{"hrweb"="hrwebrestore"}

$aksALRRestoreRequest = Initialize-AzDataProtectionRestoreRequest -DatasourceType AzureKubernetesService -SourceDataStore VaultStore -RestoreLocation $location -RestoreType AlternateLocation -RecoveryPoint $rp[0].Property.RecoveryPointId -RestoreConfiguration $aksRestoreCriteria -TargetResourceId $targetAKSClusterARMId

# assign necessary permissions from portal
Set-AzContext -SubscriptionId $subId
Set-AzDataProtectionMSIPermission -VaultResourceGroup $resourceGroupName -VaultName $vaultName -PermissionsScope "ResourceGroup" -RestoreRequest $aksALRRestoreRequest -SnapshotResourceGroupId $snapshotResourceGroupId

$validateRestore = Test-AzDataProtectionBackupInstanceRestore -SubscriptionId $subId -ResourceGroupName $resourceGroupName -VaultName $vaultName -RestoreRequest $aksALRRestoreRequest -Name $instance.BackupInstanceName 

$restoreJob = Start-AzDataProtectionBackupInstanceRestore -SubscriptionId $subId -ResourceGroupName $resourceGroupName  -VaultName $vaultName -BackupInstanceName $instance.BackupInstanceName -Parameter $aksALRRestoreRequest

First, we initialize the necessary variables that will be used in the restore script. Then, we fetch the backup instance and recovery point for the instance. Next, we initialize the Restore Configuration client object, which is used to set up the restore request client object. Note that for vaulted restores, we have included the StagingResourceGroupId and StagingStorageAccountId parameters.

We then initialize the restore request object for an Azure Kubernetes Service (AKS) alternate location restore. After that, we assign the required permissions to the backup vault and the target AKS cluster to enable the restore operation. Please note that this command is not fully supported for all AKS scenarios; use the Azure portal to assign the necessary permissions.

Finally, we use the Test command to validate the restore configuration and ensure that the necessary permissions are in place before triggering the restore for Azure Kubernetes Service.

Parameters

-AsJob

Run the command as a job

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-BackupInstanceName

The name of the backup instance

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultProfile

Type:PSObject
Aliases:AzureRMContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IdentityDetailUserAssignedIdentityArmUrl

ARM URL for User Assigned Identity

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IdentityDetailUseSystemAssignedIdentity

Specifies if the BI is protected by System Identity

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-NoWait

Run the command asynchronously

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ObjectType

Object type of the restore request

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Parameter

Restore request object to be initialized using Initialize-AzDataProtectionRestoreRequest cmdlet To construct, see NOTES section for PARAMETER properties and create a hash table.

Type:IAzureBackupRestoreRequest
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ResourceGroupName

The name of the resource group where the backup vault is present

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-ResourceGuardOperationRequest

Resource guard operation request in the format similar to <resourceguard-ARMID>/dppTriggerRestoreRequests/default. Use this parameter when the operation is MUA protected.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RestoreTargetInfo

Gets or sets the restore target information To construct, see NOTES section for RESTORETARGETINFO properties and create a hash table.

Type:IRestoreTargetInfoBase
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-RestoreToSecondaryRegion

Switch parameter to trigger restore to secondary region (Cross region restore)

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SecureToken

Parameter to authorize operations protected by cross tenant resource guard. Use command (Get-AzAccessToken -TenantId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx -AsSecureString").Token to fetch authorization token for different tenant.

Type:SecureString
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SourceDataStoreType

Type of the source data store

Type:SourceDataStoreType
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SourceResourceId

Fully qualified Azure Resource Manager ID of the datasource which is being recovered

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SubscriptionId

Subscription Id of the backup vault

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Token

Parameter to authorize operations protected by cross tenant resource guard. Use command (Get-AzAccessToken -TenantId "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx -AsSecureString").Token to fetch secure authorization token for different tenant and then convert to string using ConvertFrom-SecureString cmdlet.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VaultName

The name of the backup vault

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

IAzureBackupRestoreRequest

Outputs

IOperationJobExtendedInfo