Editar

Compartilhar via

Get-ADReplicationSubnet

  • Reference
Module:
ActiveDirectory

Gets one or more Active Directory subnets.

Syntax

Get-ADReplicationSubnet
   [-AuthType <ADAuthType>]
   [-Credential <PSCredential>]
   -Filter <String>
   [-Properties <String[]>]
   [-Server <String>]
   [<CommonParameters>]
Get-ADReplicationSubnet
   [-AuthType <ADAuthType>]
   [-Credential <PSCredential>]
   [-Identity] <ADReplicationSubnet>
   [-Properties <String[]>]
   [-Server <String>]
   [<CommonParameters>]

Description

The Get-ADReplicationSubnet cmdlet gets a specific Active Directory subnet or a set of subnets based on a specified filter. Subnet objects (class subnet) define network subnets in Active Directory. A network subnet is a segment of a TCP/IP network to which a set of logical IP addresses is assigned. Subnets group computers in a way that identifies their physical proximity on the network. Subnet objects in Active Directory are used to map computers to sites.

Examples

Example 1: Get all subnets

PS C:\> Get-ADReplicationSubnet -Filter *

This command gets all of the subnets.

Example 2: Get subnets in a specified location

PS C:\> Get-ADReplicationSubnet -Filter "Location -like '*Japan'"

This command gets all the subnets in Japan.

Example 3: Get subnets with a specified name

PS C:\> Get-ADReplicationSubnet -Identity "10.0.0.0/25"

This command gets the subnet with name 10.0.0.0/25.

Example 4: Get the properties of a specified subnet

PS C:\> Get-ADReplicationSubnet -Identity "10.0.0.0/25" -Properties *

This command gets all of the properties of the subnet identified as 10.0.0.0/25.

Parameters

-AuthType

Specifies the authentication method to use. The acceptable values for this parameter are:

  • Negotiate or 0
  • Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

Type:ADAuthType
Accepted values:Negotiate, Basic
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Credential

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.

Type:PSCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Filter

Specifies a query string that retrieves Active Directory objects. This string uses the PowerShell Expression Language syntax. The PowerShell Expression Language syntax provides rich type-conversion support for value types received by the Filter parameter. The syntax uses an in-order representation, which means that the operator is placed between the operand and the value. For more information about the Filter parameter, type Get-Help about_ActiveDirectory_Filter.

Syntax:

The following syntax uses Backus-Naur form to show how to use the PowerShell Expression Language for this parameter.

<filter> ::= "{" <FilterComponentList> "}"

<FilterComponentList> ::= <FilterComponent> | <FilterComponent> <JoinOperator> <FilterComponent> | <NotOperator> <FilterComponent>

<FilterComponent> ::= <attr> <FilterOperator> <value> | "(" <FilterComponent> ")"

<FilterOperator> ::= "-eq" | "-le" | "-ge" | "-ne" | "-lt" | "-gt"| "-approx" | "-bor" | "-band" | "-recursivematch" | "-like" | "-notlike"

<JoinOperator> ::= "-and" | "-or"

<NotOperator> ::= "-not"

<attr> ::= <PropertyName> | <LDAPDisplayName of the attribute>

<value>::= <compare this value with an <attr> by using the specified <FilterOperator>>

For a list of supported types for <value>, see about_ActiveDirectory_ObjectModel.

Note: PowerShell wildcards other than *, such as ?, are not supported by the Filter syntax.

Note: To query using LDAP query strings, use the LDAPFilter parameter.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Identity

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. The acceptable values for this parameter are:

  • A distinguished name
  • A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

Type:ADReplicationSubnet
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Properties

Specifies the properties of the output object to retrieve from the server. Use this parameter to retrieve properties that are not included in the default set.

Specify properties for this parameter as a comma-separated list of names. To display all of the attributes that are set on the object, specify * (asterisk).

To specify an individual extended property, use the name of the property. For properties that are not default or extended properties, you must specify the LDAP display name of the attribute.

To retrieve properties and display them for an object, you can use the Get-* cmdlet associated with the object and pass the output to the Get-Member cmdlet.

Type:String[]
Aliases:Property
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Server

Specifies the Active Directory Domain Services instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.

Domain name values:

  • Fully qualified domain name (FQDN)
  • NetBIOS name

Directory server values:

  • Fully qualified domain name (FQDN)
  • NetBIOS name

The default value for the Server parameter is determined by one of the following methods in the order that they are listed:

  • By using Server value from objects passed through the pipeline.
  • By using the server information associated with the Active Directory PowerShell provider drive, when running under that drive.
  • By using the domain of the computer running PowerShell.
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None or Microsoft.ActiveDirectory.Management.ADReplicationSubnet

A subnet object is received by the Identity parameter.

Outputs

ADReplicationSubnet