Get support for Azure Local deployment issues

Artigo
11/19/2024

Applies to: Azure Local, version 23H2

This article describes how to get Microsoft support for Azure Local deployment issues, including log collection and remote support.

Potential deployment issues

The following table outlines potential issues you might encounter during deployment, along with recommended troubleshooting actions.

Issues	Recommended troubleshooting actions
- Active directory preparation issues. - Azure Stack HCI Operating System installation configuration issues. - Deployment experience issues through the Azure portal and template.	File a support ticket.
- Environment validation issues. - Initialization and registration issues. - Deployment validation issues. - Deployment failure issues.	1. File a support ticket. 2. Perform standalone log collection.

Perform standalone log collection

If observability components have not been deployed or if you encounter issues during the system deployment or registration process, you can perform standalone log collection to collect and send diagnostic data to Microsoft for troubleshooting purposes. Make sure to file a support ticket before you proceed with the log collection.

Here are the high-level steps for standalone log collection:

As instructed by Microsoft Support, copy the requested diagnostic data from the Azure Local machine to a system which has connectivity to Azure.
Use Send-AzStackHciDiagnosticData to transmit the copied diagnostic data to Microsoft for troubleshooting purposes. Microsoft can access that data after you file a support ticket.

If the observability feature is already configured, you can send diagnostic data to Microsoft using the on-demand log collection process. For instructions, see Collect logs. To explore additional log collection methods in Azure Local and understand when to use them, see Diagnostics.

Send logs to Microsoft

You can use any of the following credentials to send logs:

Device code credentials ($RegistrationWithDeviceCode). See Send logs using device code credentials.
Service principal name (SPN) credentials ($RegistrationSPCredential). See Send logs using SPN credentials.
Registration with existing context credentials ($RegistrationWithExistingContext). See Send logs using registration with existing context credentials.

Send logs using device code credentials

When you run the following command, you'll be prompted to open a web browser and enter the provided code to proceed with the authentication process.

Send-AzStackHciDiagnosticData -ResourceGroupName <ResourceGroupName> -SubscriptionId <SubscriptionId> -TenantId <TenantId> - RegistrationWithDeviceCode -DiagnosticLogPath <LogPath> -RegistrationRegion <RegionName> -Cloud <AzureCloud>

Send logs using SPN credentials

Send-AzStackHciDiagnosticData -ResourceGroupName <ResourceGroupName> -SubscriptionId <SubscriptionId> -TenantId <TenantId> - RegistrationSPCredential <RegistrationSPCredential> -DiagnosticLogPath <LogPath> -RegistrationRegion <RegionName> -Cloud <AzureCloud>

You can use the following commands to get SPN credentials:

$SPNAppID = "<Your App ID>"  
$SPNSecret= "<Your SPN Secret>"  
$SPNsecStringPassword = ConvertTo-SecureString  
$SPNSecret -AsPlainText -Force  
$SPNCred = New-Object System.Management.Automation.PSCredential ($SPNAppID, $SPNsecStringPassword)

Send logs using registration with existing context credentials

Send-AzStackHciDiagnosticData -ResourceGroupName <ResourceGroupName> -SubscriptionId <SubscriptionId> -TenantId <TenantId> - RegistrationWithExistingContext -DiagnosticLogPath <LogPath> - RegistrationRegion <RegionName> -Cloud <AzureCloud>

Get remote support

In the pre-deployment or pre-registration scenarios, you are prompted to install and enable remote support via the Environment Checker to evaluate the readiness for deployment. If you enable remote support, Microsoft Support can connect to your device remotely and offer assistance. If you want to get remote support post-deployment of the system, see Get remote support for Azure Local.

The high-level workflow to get remote support in the pre-deployment or pre-registration scenario is as follows:

Submit a support request.
Enable remote support via PowerShell. This is a one-time configuration.

Enable remote support

Follow these steps to enable remote support:

Establish a remote PowerShell session with the machine. Run PowerShell as administrator and run the following command:
```
Enter-PsSession -ComputerName <MachineName> -Credential $cred
```
Run the following command to enable remote support. The sample Shared Access Signature (SAS) is provided by the Microsoft support team.
```
Enable-AzStackHciRemoteSupport -AccessLevel <Diagnostics Or DiagnosticsRepair> -ExpireInMinutes <1440> -SasCredential <Sample SAS> -PassThru
```
Note

When you run the command to enable remote support, you may get the following error:

Processing data from remote server <MachineName> failed with the following error message: The I/O operation has been aborted because of either a thread exit or an application request.

This means the Just Enough Administration (JEA) configuration has not been established. When you enable remote support, a service restart is required to activate JEA. During the remote support JEA configuration, the Windows Remote Management (WinRM) restarts twice, which may disrupt the PsSession to the machine. To resolve this error, wait for a few minutes before reconnecting to the remote machine and then run the Enable-AzStackHciRemoteSupport command again to enable remote support.

For remote support usage scenarios, see Remote support examples.

Next steps

For detailed remediation for common known issues, check out:

Azure Stack HCI Supportability repository

Alternatively, you can:

Compartilhar via