Compartilhar via

IDE Duplicator for CompactFlash and IDE Devices

  • Artigo

DSL Duplicator

The latest production tool from Datasound Laboratories shaves hours from typical production cycles.

According to their advert: "Gone are the days of time-consuming serial programming; now you can program up to 10 storage devices at once, in seconds! "

If you're not involved in the production side of things, the question of 'how to I transfer my XPe image to dozens or hundreds of flash devices?' is a common question.

The value of using a Flash Duplicator is that it allows en-masse duplication of CompactFlash cards, IDE DiskOnModules and Hard Drives which means that in not too much time after purchase, depending on the volume, the duplicator will pay for itself.

This particular duplicator uses an internal RAID array and duplicates the media by copying individual sectors .This means that regardless of format, operating system, or how you have it partitioned, you'll get an exact clone each time. Also, this unit works standalone without a PC.

For more details:

- Owner's Manual (PDF)

- Product Page

- Andy

Comments