Wiele operacji kopiowania zbiorczego
Można wykonać wiele operacji kopiowania zbiorczego SqlBulkCopy przy użyciu jednego wystąpienia klasy. Jeśli parametry operacji zmieniają się między kopiami (na przykład nazwą tabeli docelowej), należy je zaktualizować przed wszelkimi kolejnymi wywołaniami metod WriteToServer , jak pokazano w poniższym przykładzie. O ile nie zostaną jawnie zmienione, wszystkie wartości właściwości pozostaną takie same jak w poprzedniej operacji kopiowania zbiorczego dla danego wystąpienia.
Uwaga
Wykonywanie wielu operacji kopiowania zbiorczego SqlBulkCopy przy użyciu tego samego wystąpienia programu jest zwykle bardziej wydajne niż użycie oddzielnego wystąpienia dla każdej operacji.
Jeśli wykonasz kilka operacji kopiowania zbiorczego przy użyciu tego samego SqlBulkCopy obiektu, nie ma żadnych ograniczeń dotyczących tego, czy informacje źródłowe lub docelowe są równe, czy różne w każdej operacji. Należy jednak upewnić się, że informacje o skojarzeniu kolumn są prawidłowo ustawiane za każdym razem, gdy zapisujesz na serwerze.
Ważne
Ten przykład nie zostanie uruchomiony, chyba że zostały utworzone tabele robocze zgodnie z opisem w sekcji Konfiguracja przykładu kopiowania zbiorczego. Ten kod jest dostarczany w celu zademonstrowania składni tylko przy użyciu narzędzia SqlBulkCopy . Jeśli tabele źródłowe i docelowe znajdują się w tym samym wystąpieniu programu SQL Server, łatwiej i szybciej jest użyć instrukcji Języka Transact-SQL INSERT … SELECT do skopiowania danych.
static void Main()
{
var connectionString = GetConnectionString();
// Open a connection to the AdventureWorks database.
using (SqlConnection connection =
new(connectionString))
{
connection.Open();
// Empty the destination tables.
SqlCommand deleteHeader = new(
"DELETE FROM dbo.BulkCopyDemoOrderHeader;",
connection);
deleteHeader.ExecuteNonQuery();
SqlCommand deleteDetail = new(
"DELETE FROM dbo.BulkCopyDemoOrderDetail;",
connection);
deleteDetail.ExecuteNonQuery();
// Perform an initial count on the destination
// table with matching columns.
SqlCommand countRowHeader = new(
"SELECT COUNT(*) FROM dbo.BulkCopyDemoOrderHeader;",
connection);
long countStartHeader = Convert.ToInt32(
countRowHeader.ExecuteScalar());
Console.WriteLine(
"Starting row count for Header table = {0}",
countStartHeader);
// Perform an initial count on the destination
// table with different column positions.
SqlCommand countRowDetail = new(
"SELECT COUNT(*) FROM dbo.BulkCopyDemoOrderDetail;",
connection);
long countStartDetail = Convert.ToInt32(
countRowDetail.ExecuteScalar());
Console.WriteLine(
"Starting row count for Detail table = {0}",
countStartDetail);
// Get data from the source table as a SqlDataReader.
// The Sales.SalesOrderHeader and Sales.SalesOrderDetail
// tables are quite large and could easily cause a timeout
// if all data from the tables is added to the destination.
// To keep the example simple and quick, a parameter is
// used to select only orders for a particular account
// as the source for the bulk insert.
SqlCommand headerData = new(
"SELECT [SalesOrderID], [OrderDate], " +
"[AccountNumber] FROM [Sales].[SalesOrderHeader] " +
"WHERE [AccountNumber] = @accountNumber;",
connection);
SqlParameter parameterAccount = new()
{
ParameterName = "@accountNumber",
SqlDbType = SqlDbType.NVarChar,
Direction = ParameterDirection.Input,
Value = "10-4020-000034"
};
headerData.Parameters.Add(parameterAccount);
SqlDataReader readerHeader = headerData.ExecuteReader();
// Get the Detail data in a separate connection.
using (SqlConnection connection2 = new(connectionString))
{
connection2.Open();
SqlCommand sourceDetailData = new(
"SELECT [Sales].[SalesOrderDetail].[SalesOrderID], [SalesOrderDetailID], " +
"[OrderQty], [ProductID], [UnitPrice] FROM [Sales].[SalesOrderDetail] " +
"INNER JOIN [Sales].[SalesOrderHeader] ON [Sales].[SalesOrderDetail]." +
"[SalesOrderID] = [Sales].[SalesOrderHeader].[SalesOrderID] " +
"WHERE [AccountNumber] = @accountNumber;", connection2);
SqlParameter accountDetail = new()
{
ParameterName = "@accountNumber",
SqlDbType = SqlDbType.NVarChar,
Direction = ParameterDirection.Input,
Value = "10-4020-000034"
};
sourceDetailData.Parameters.Add(accountDetail);
SqlDataReader readerDetail = sourceDetailData.ExecuteReader();
// Create the SqlBulkCopy object.
using (SqlBulkCopy bulkCopy =
new(connectionString))
{
bulkCopy.DestinationTableName =
"dbo.BulkCopyDemoOrderHeader";
// Guarantee that columns are mapped correctly by
// defining the column mappings for the order.
bulkCopy.ColumnMappings.Add("SalesOrderID", "SalesOrderID");
bulkCopy.ColumnMappings.Add("OrderDate", "OrderDate");
bulkCopy.ColumnMappings.Add("AccountNumber", "AccountNumber");
// Write readerHeader to the destination.
try
{
bulkCopy.WriteToServer(readerHeader);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
readerHeader.Close();
}
// Set up the order details destination.
bulkCopy.DestinationTableName = "dbo.BulkCopyDemoOrderDetail";
// Clear the ColumnMappingCollection.
bulkCopy.ColumnMappings.Clear();
// Add order detail column mappings.
bulkCopy.ColumnMappings.Add("SalesOrderID", "SalesOrderID");
bulkCopy.ColumnMappings.Add("SalesOrderDetailID", "SalesOrderDetailID");
bulkCopy.ColumnMappings.Add("OrderQty", "OrderQty");
bulkCopy.ColumnMappings.Add("ProductID", "ProductID");
bulkCopy.ColumnMappings.Add("UnitPrice", "UnitPrice");
// Write readerDetail to the destination.
try
{
bulkCopy.WriteToServer(readerDetail);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
readerDetail.Close();
}
}
// Perform a final count on the destination
// tables to see how many rows were added.
long countEndHeader = Convert.ToInt32(
countRowHeader.ExecuteScalar());
Console.WriteLine("{0} rows were added to the Header table.",
countEndHeader - countStartHeader);
long countEndDetail = Convert.ToInt32(
countRowDetail.ExecuteScalar());
Console.WriteLine("{0} rows were added to the Detail table.",
countEndDetail - countStartDetail);
Console.WriteLine("Press Enter to finish.");
Console.ReadLine();
}
}
}
Imports System.Data.SqlClient
Module Module1
Sub Main()
Dim connectionString As String = GetConnectionString()
' Open a connection to the AdventureWorks database.
Using connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
' Empty the destination tables.
Dim deleteHeader As New SqlCommand( _
"DELETE FROM dbo.BulkCopyDemoOrderHeader;", connection)
deleteHeader.ExecuteNonQuery()
deleteHeader.Dispose()
Dim deleteDetail As New SqlCommand( _
"DELETE FROM dbo.BulkCopyDemoOrderDetail;", connection)
deleteDetail.ExecuteNonQuery()
' Perform an initial count on the destination table
' with matching columns.
Dim countRowHeader As New SqlCommand( _
"SELECT COUNT(*) FROM dbo.BulkCopyDemoOrderHeader;", _
connection)
Dim countStartHeader As Long = System.Convert.ToInt32( _
countRowHeader.ExecuteScalar())
Console.WriteLine("Starting row count for Header table = {0}", _
countStartHeader)
' Perform an initial count on the destination table
' with different column positions.
Dim countRowDetail As New SqlCommand( _
"SELECT COUNT(*) FROM dbo.BulkCopyDemoOrderDetail;", _
connection)
Dim countStartDetail As Long = System.Convert.ToInt32( _
countRowDetail.ExecuteScalar())
Console.WriteLine("Starting row count for Detail table = " & _
countStartDetail)
' Get data from the source table as a SqlDataReader.
' The Sales.SalesOrderHeader and Sales.SalesOrderDetail
' tables are quite large and could easily cause a timeout
' if all data from the tables is added to the destination.
' To keep the example simple and quick, a parameter is
' used to select only orders for a particular account as
' the source for the bulk insert.
Dim headerData As SqlCommand = New SqlCommand( _
"SELECT [SalesOrderID], [OrderDate], " & _
"[AccountNumber] FROM [Sales].[SalesOrderHeader] " & _
"WHERE [AccountNumber] = @accountNumber;", _
connection)
Dim parameterAccount As SqlParameter = New SqlParameter()
parameterAccount.ParameterName = "@accountNumber"
parameterAccount.SqlDbType = SqlDbType.NVarChar
parameterAccount.Direction = ParameterDirection.Input
parameterAccount.Value = "10-4020-000034"
headerData.Parameters.Add(parameterAccount)
Dim readerHeader As SqlDataReader = _
headerData.ExecuteReader()
' Get the Detail data in a separate connection.
Using connection2 As SqlConnection = New SqlConnection(connectionString)
connection2.Open()
Dim sourceDetailData As SqlCommand = New SqlCommand( _
"SELECT [Sales].[SalesOrderDetail].[SalesOrderID], " & _
"[SalesOrderDetailID], [OrderQty], [ProductID], [UnitPrice] " & _
"FROM [Sales].[SalesOrderDetail] INNER JOIN " & _
"[Sales].[SalesOrderHeader] " & _
"ON [Sales].[SalesOrderDetail].[SalesOrderID] = " & _
"[Sales].[SalesOrderHeader].[SalesOrderID] " & _
"WHERE [AccountNumber] = @accountNumber;", connection2)
Dim accountDetail As SqlParameter = New SqlParameter()
accountDetail.ParameterName = "@accountNumber"
accountDetail.SqlDbType = SqlDbType.NVarChar
accountDetail.Direction = ParameterDirection.Input
accountDetail.Value = "10-4020-000034"
sourceDetailData.Parameters.Add( _
accountDetail)
Dim readerDetail As SqlDataReader = _
sourceDetailData.ExecuteReader()
' Create the SqlBulkCopy object.
Using bulkCopy As SqlBulkCopy = _
New SqlBulkCopy(connectionString)
bulkCopy.DestinationTableName = "dbo.BulkCopyDemoOrderHeader"
' Guarantee that columns are mapped correctly by
' defining the column mappings for the order.
bulkCopy.ColumnMappings.Add("SalesOrderID", "SalesOrderID")
bulkCopy.ColumnMappings.Add("OrderDate", "OrderDate")
bulkCopy.ColumnMappings.Add("AccountNumber", "AccountNumber")
' Write readerHeader to the destination.
Try
bulkCopy.WriteToServer(readerHeader)
Catch ex As Exception
Console.WriteLine(ex.Message)
Finally
readerHeader.Close()
End Try
' Set up the order details destination.
bulkCopy.DestinationTableName = "dbo.BulkCopyDemoOrderDetail"
' Clear the ColumnMappingCollection.
bulkCopy.ColumnMappings.Clear()
' Add order detail column mappings.
bulkCopy.ColumnMappings.Add("SalesOrderID", "SalesOrderID")
bulkCopy.ColumnMappings.Add("SalesOrderDetailID", "SalesOrderDetailID")
bulkCopy.ColumnMappings.Add("OrderQty", "OrderQty")
bulkCopy.ColumnMappings.Add("ProductID", "ProductID")
bulkCopy.ColumnMappings.Add("UnitPrice", "UnitPrice")
' Write readerDetail to the destination.
Try
bulkCopy.WriteToServer(readerDetail)
Catch ex As Exception
Console.WriteLine(ex.Message)
Finally
readerDetail.Close()
End Try
End Using
' Perform a final count on the destination tables
' to see how many rows were added.
Dim countEndHeader As Long = System.Convert.ToInt32( _
countRowHeader.ExecuteScalar())
Console.WriteLine("{0} rows were added to the Header table.", _
countEndHeader - countStartHeader)
Dim countEndDetail As Long = System.Convert.ToInt32( _
countRowDetail.ExecuteScalar())
Console.WriteLine("{0} rows were added to the Detail table.", _
countEndDetail - countStartDetail)
Console.WriteLine("Press Enter to finish.")
Console.ReadLine()
End Using
End Using
End Sub
Private Function GetConnectionString() As String
Throw New NotImplementedException()
End Function
End Module