Udostępnij za pośrednictwem


IWpfTextViewLine Interface

Definition

Represents a line of rendered text in the ITextView.

public interface class IWpfTextViewLine : Microsoft::VisualStudio::Text::Formatting::ITextViewLine
public interface class IWpfTextViewLine : Microsoft::VisualStudio::Text::Formatting::ITextViewLine
__interface IWpfTextViewLine : Microsoft::VisualStudio::Text::Formatting::ITextViewLine
public interface IWpfTextViewLine : Microsoft.VisualStudio.Text.Formatting.ITextViewLine
type IWpfTextViewLine = interface
    interface ITextViewLine
Public Interface IWpfTextViewLine
Implements ITextViewLine
Derived
Implements

Remarks

Only those ITextSnapshotLine objects of which parts are visible in the viewport will be formatted.

Most properties and parameters that are doubles correspond to coordinates or distances in the text rendering coordinate system. In this coordinate system, x = 0.0 corresponds to the left edge of the drawing surface onto which text is rendered (x = view.ViewportLeft corresponds to the left edge of the viewport), and y = view.ViewportTop corresponds to the top edge of the viewport. The x-coordinate increases from left to right, and the y-coordinate increases from top to bottom.

The horizontal and vertical axes of the view behave differently. When the text in the view is formatted, only the visible lines are formatted. As a result, a viewport cannot be scrolled horizontally and vertically in the same way.

A viewport is scrolled horizontally by changing the left coordinate of the viewport so that it moves with respect to the drawing surface.

A view can be scrolled vertically only by performing a new layout.

Doing a layout in the view may cause the ViewportTop property of the view to change. For example, scrolling down one line will not translate any of the visible lines. Instead it will simply change the view's ViewportTop property (causing the lines to move on the screen even though their y-coordinates have not changed).

Distances in the text rendering coordinate system correspond to logical pixels. If the text rendering surface is displayed without any scaling transform, then 1 unit in the text rendering coordinate system corresponds to one pixel on the display.

Properties

Baseline

Gets the distance from the top of the text to the baseline text on the line.

(Inherited from ITextViewLine)
Bottom

Gets the position of the bottom edge of this line in the text rendering coordinate system.

(Inherited from ITextViewLine)
Change

Gets the change to this rendered textline between the current layout and the previous layout.

(Inherited from ITextViewLine)
DefaultLineTransform

Gets the default LineTransform used to render this line.

(Inherited from ITextViewLine)
DeltaY

Gets the change in the top of this rendered textline between between the value of Top in the current layout and the value of Top in the previous layout.

(Inherited from ITextViewLine)
End

Gets the position of the first character past the end of the line, excluding any line break characters. In most cases this property references a line break character, except for the last line in the buffer, in which case it contains a position past the end of the buffer.

(Inherited from ITextViewLine)
EndIncludingLineBreak

Gets the position of the first character past the end of the line, including any line break characters In most cases this property references the first character in the following line, unless this is the last line, in which case it contains a position past the end of the buffer.

(Inherited from ITextViewLine)
EndOfLineWidth

Gets the distance from the right edge of the last character in this line to the end of the space of this line. This may include padding for line break characters or for end of file characters.

(Inherited from ITextViewLine)
Extent

Gets the extent of the line, excluding any line break characters.

(Inherited from ITextViewLine)
ExtentAsMappingSpan

Gets the IMappingSpan that corresponds to the Extent of the line.

(Inherited from ITextViewLine)
ExtentIncludingLineBreak

Gets the extent of the line, including any line break characters.

(Inherited from ITextViewLine)
ExtentIncludingLineBreakAsMappingSpan

Gets the IMappingSpan that corresponds to ExtentIncludingLineBreak.

(Inherited from ITextViewLine)
Height

Gets the distance between the top and bottom edge of this line.

(Inherited from ITextViewLine)
IdentityTag

Gets a tag that can be used to track the identity of an ITextViewLine across layouts in the view.

(Inherited from ITextViewLine)
IsFirstTextViewLineForSnapshotLine

Determines whether this ITextViewLine is the first line in the list of lines formatted for a particular ITextSnapshotLine.

(Inherited from ITextViewLine)
IsLastTextViewLineForSnapshotLine

Determines whether this ITextViewLine is the last line in the list of lines formatted for a particular ITextSnapshotLine.

(Inherited from ITextViewLine)
IsValid

Determines whether this text view line is still valid.

(Inherited from ITextViewLine)
Left

Gets the position of the left edge of this line in the text rendering coordinate system.

(Inherited from ITextViewLine)
Length

Gets the length of the line, excluding any line break characters.

(Inherited from ITextViewLine)
LengthIncludingLineBreak

Gets the length of the line, including any line break characters.

(Inherited from ITextViewLine)
LineBreakLength

Gets the length of the line break sequence (for example, "\r\n") that appears at the end of this line.

(Inherited from ITextViewLine)
LineTransform

Gets the LineTransform used to render this line.

(Inherited from ITextViewLine)
Right

Gets the position of the right edge of this line in the text rendering coordinate system.

(Inherited from ITextViewLine)
Snapshot

Gets the ITextSnapshot on which this map is based.

(Inherited from ITextViewLine)
Start

Gets the position in Snapshot of the first character in the line.

(Inherited from ITextViewLine)
TextBottom

Gets the y-coordinate of the bottom of the text in the rendered line.

(Inherited from ITextViewLine)
TextHeight

Gets the vertical distance between the top and bottom of the text in the rendered line.

(Inherited from ITextViewLine)
TextLeft

Gets the x-coordinate of the left edge of the text in the rendered line.

(Inherited from ITextViewLine)
TextLines

Gets a list of WPF text lines that make up the formatted text line.

TextRight

Gets the x-coordinate of the right edge of the text in the rendered line.

(Inherited from ITextViewLine)
TextTop

Gets the y-coordinate of the top of the text in the rendered line.

(Inherited from ITextViewLine)
TextWidth

Gets the horizontal distance between TextRight and TextLeft.

(Inherited from ITextViewLine)
Top

Gets the position of the top edge of this line in the text rendering coordinate system.

(Inherited from ITextViewLine)
VirtualSpaceWidth

Get the width of the virtual spaces at the end of this line.

(Inherited from ITextViewLine)
VisibilityState

Gets the visibility state of this rendered text line with respect to the top and bottom of the view.

(Inherited from ITextViewLine)
VisibleArea

Gets the visible area in which this text line will be rendered.

Width

Gets the distance between the left and right edges of this line.

(Inherited from ITextViewLine)

Methods

ContainsBufferPosition(SnapshotPoint)

Determines whether the specified buffer position lies within this text line.

(Inherited from ITextViewLine)
GetAdornmentBounds(Object)

Calculates the bounds of the specified adornment.

(Inherited from ITextViewLine)
GetAdornmentTags(Object)

Gets the adornments positioned on the line.

(Inherited from ITextViewLine)
GetBufferPositionFromXCoordinate(Double, Boolean)

Gets the buffer position of the character whose character bounds contains the given x-coordinate.

(Inherited from ITextViewLine)
GetBufferPositionFromXCoordinate(Double)

Gets the buffer position of the character whose character bounds contains the given x-coordinate.

(Inherited from ITextViewLine)
GetCharacterBounds(SnapshotPoint)

Calculates the bounds of the character at the specified buffer position.

(Inherited from ITextViewLine)
GetCharacterBounds(VirtualSnapshotPoint)

Calculates the bounds of the character at the specified buffer position.

(Inherited from ITextViewLine)
GetCharacterFormatting(SnapshotPoint)

Gets the formatting for a particular character in the line.

GetExtendedCharacterBounds(SnapshotPoint)

Calculates the bounds of the character at the specified buffer position, including any adjacent space-negotiating adornments.

(Inherited from ITextViewLine)
GetExtendedCharacterBounds(VirtualSnapshotPoint)

Calculates the bounds of the character at the specified virtual buffer position, including any adjacent space-negotiating adornments.

(Inherited from ITextViewLine)
GetInsertionBufferPositionFromXCoordinate(Double)

Gets the buffer position used if new data were to be inserted at the given x-coordinate.

(Inherited from ITextViewLine)
GetNormalizedTextBounds(SnapshotSpan)

Gets a collection of TextBounds structures for the text that corresponds to the given span.

(Inherited from ITextViewLine)
GetTextElementSpan(SnapshotPoint)

Gets the span whose text elementindex corresponds to the given buffer position.

(Inherited from ITextViewLine)
GetVirtualBufferPositionFromXCoordinate(Double)

Gets the buffer position of the character whose character bounds contains the given x-coordinate.

(Inherited from ITextViewLine)
IntersectsBufferSpan(SnapshotSpan)

Determines whether a bufferSpan intersects this text line.

(Inherited from ITextViewLine)

Applies to