Udostępnij za pośrednictwem

Przykłady szablonów usługi Resource Manager dla reguł alertów dotyczących metryk w usłudze Azure Monitor

  • Artykuł

Ten artykuł zawiera przykłady użycia szablonów usługi Azure Resource Manager do konfigurowania reguł alertów metryk w usłudze Azure Monitor. Każdy przykład zawiera plik szablonu i plik parametrów z przykładowymi wartościami, które mają być udostępniane szablonowi.

Uwaga

Zobacz Przykłady usługi Azure Resource Manager dla usługi Azure Monitor, aby uzyskać listę dostępnych przykładów i wskazówki dotyczące wdrażania ich w ramach subskrypcji platformy Azure.

Zobacz Obsługiwane zasoby dla alertów dotyczących metryk w usłudze Azure Monitor , aby uzyskać listę zasobów, których można używać z regułami alertów dotyczących metryk. Wyjaśnienie schematu i właściwości reguły alertu jest dostępne w temacie Alerty metryk — tworzenie lub aktualizowanie.

Uwaga

Szablon zasobu do tworzenia alertów metryk dla typu zasobu: Obszar roboczy usługi Azure Log Analytics (tj. ) Microsoft.OperationalInsights/workspaceswymaga dodatkowych kroków. Aby uzyskać szczegółowe informacje, zobacz Alert metryki dla dzienników — szablon zasobu.

Odwołania do szablonów

Pojedyncze kryteria, próg statyczny

Poniższy przykład tworzy regułę alertu metryki przy użyciu pojedynczych kryteriów i progu statycznego.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold int = 0

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Metric Alert"
    },
    "alertDescription": {
      "value": "New metric alert created via template"
    },
    "alertSeverity": {
      "value":3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/Microsoft.Compute/virtualMachines/replace-with-resource-name"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 80
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Pojedyncze kryteria, próg dynamiczny

Poniższy przykład tworzy regułę alertu metryki przy użyciu pojedynczych kryteriów i progu dynamicznego.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('Use this option to set the date from which to start learning the metric historical data and calculate the dynamic thresholds (in ISO8601 format, e.g. \'2019-12-31T22:00:00Z\').')
param ignoreDataBefore string = ''

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          ignoreDataBefore: ignoreDataBefore
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Metric Alert with Dynamic Thresholds"
    },
    "alertDescription": {
      "value": "New metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value":3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/Microsoft.Compute/virtualMachines/replace-with-resource-name"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "ignoreDataBefore": {
      "value": ""
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Wiele kryteriów, próg statyczny

Alerty metryk obsługują alerty dotyczące metryk wielowymiarowych i maksymalnie 5 kryteriów na regułę alertu. Poniższy przykład tworzy regułę alertu metryki dla metryk wymiarowych i określa wiele kryteriów.

Podczas używania wymiarów w regule alertu zawierającej wiele kryteriów obowiązują następujące ograniczenia:

  • W ramach każdego kryterium można wybrać tylko jedną wartość na wymiar.

  • Nie można użyć wartości wymiaru "*".

  • Jeśli metryki skonfigurowane w różnych kryteriach obsługują ten sam wymiar, skonfigurowana wartość wymiaru musi być jawnie ustawiona w taki sam sposób dla wszystkich tych metryk w odpowiednich kryteriach.

    • W poniższym przykładzie, ponieważ metryki Transakcje i SuccessE2ELatency mają wymiar ApiName, a kryterium1 określa wartość "GetBlob" wymiaru ApiName, a następnie kryterium2 musi również ustawić wartość "GetBlob" dla wymiaru ApiName.

Plik szablonu

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion1 object

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion2 object

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criterion1_var = array(criterion1)
var criterion2_var = array(criterion2)
var criteria = concat(criterion1_var, criterion2_var)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Multi-dimensional Metric Alert (Replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert created via template (Replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion1": {
      "value": {
        "name": "1st criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "Success" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 5,
        "timeAggregation": "Total"
      }
    },
    "criterion2": {
      "value": {
        "name": "2nd criterion",
        "metricName": "SuccessE2ELatency",
        "dimensions": [
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 250,
        "timeAggregation": "Average"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Wiele wymiarów, próg statyczny

Pojedyncza reguła alertu może jednocześnie monitorować wiele szeregów czasowych metryk, co skutkuje mniejszą liczbą reguł alertów do zarządzania. Poniższy przykład tworzy statyczną regułę alertu metryki dla metryk wymiarowych.

W tym przykładzie reguła alertu monitoruje kombinacje wartości wymiarów wymiarów ResponseType i ApiName dla metryki Transakcje:

  1. ResponsType — użycie symbolu wieloznakowego "*" oznacza, że dla każdej wartości wymiaru ResponseType, w tym przyszłych wartości, monitorowana jest oddzielnie inna seria czasowa.
  2. ApiName — różne szeregi czasowe są monitorowane tylko dla wartości wymiarów GetBlob i PutBlob .

Na przykład kilka potencjalnych szeregów czasowych monitorowanych przez tę regułę alertu to:

  • Metric = Transactions, ResponseType = Success, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Success, ApiName = PutBlob
  • Metric = Transactions, ResponseType = Limit czasu serwera, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Limit czasu serwera, ApiName = PutBlob

Plik szablonu

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion object

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criteria = array(criterion)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New multi-dimensional metric alert rule (replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert rule created via template (replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion": {
      "value": {
        "name": "Criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "*" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob", "PutBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 5,
        "timeAggregation": "Total"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Uwaga

Użycie wartości wymiarów "Wszystkie" jest równoważne z wybraniem wartości "*" (wszystkie bieżące i przyszłe wartości).

Wiele wymiarów, progi dynamiczne

Pojedyncza reguła alertu progów dynamicznych może jednocześnie tworzyć dostosowane progi dla setek szeregów czasowych metryk (nawet różnych typów), co skutkuje mniejszą liczbą reguł alertów do zarządzania. Poniższy przykład tworzy regułę alertu metryki progów dynamicznych dla metryk wymiarowych.

W tym przykładzie reguła alertu monitoruje kombinacje wartości wymiarów wymiarów ResponseType i ApiName dla metryki Transakcje:

  1. ResponsType — dla każdej wartości wymiaru ResponseType , w tym przyszłych wartości, szereg czasowy jest monitorowany indywidualnie.
  2. ApiName — różne szeregi czasowe są monitorowane tylko dla wartości wymiarów GetBlob i PutBlob .

Na przykład kilka potencjalnych szeregów czasowych monitorowanych przez tę regułę alertu to:

  • Metric = Transactions, ResponseType = Success, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Success, ApiName = PutBlob
  • Metric = Transactions, ResponseType = Limit czasu serwera, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Limit czasu serwera, ApiName = PutBlob

Uwaga

Wiele kryteriów nie jest obecnie obsługiwanych w przypadku reguł alertów dotyczących metryk korzystających z progów dynamicznych.

Plik szablonu

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator.')
param criterion object

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criteria = array(criterion)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Multi-dimensional Metric Alert with Dynamic Thresholds (Replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert with Dynamic Thresholds created via template (Replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion": {
      "value": {
        "criterionType": "DynamicThresholdCriterion",
        "name": "1st criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "*" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob", "PutBlob" ]
          }
        ],
        "operator": "GreaterOrLessThan",
        "alertSensitivity": "Medium",
        "failingPeriods": {
          "numberOfEvaluationPeriods": "4",
          "minFailingPeriodsToAlert": "3"
        },
        "timeAggregation": "Total"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Metryka niestandardowa, próg statyczny

Za pomocą poniższego szablonu można utworzyć bardziej zaawansowaną regułę alertu metryki progu statycznego dla metryki niestandardowej.

Aby dowiedzieć się więcej na temat metryk niestandardowych w usłudze Azure Monitor, zobacz Metryki niestandardowe w usłudze Azure Monitor.

Podczas tworzenia reguły alertu dla metryki niestandardowej należy określić zarówno nazwę metryki, jak i przestrzeń nazw metryki. Upewnij się również, że metryka niestandardowa jest już zgłaszana, ponieważ nie można utworzyć reguły alertu dla metryki niestandardowej, która jeszcze nie istnieje.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Namespace of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricNamespace string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold int = 0

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('How often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          metricNamespace: metricNamespace
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New alert rule on a custom metric"
    },
    "alertDescription": {
      "value": "New alert rule on a custom metric created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/microsoft.insights/components/replace-with-application-insights-resource-name"
    },
    "metricName": {
      "value": "The custom metric name"
    },
    "metricNamespace": {
      "value": "Azure.ApplicationInsights"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 80
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Uwaga

Przestrzeń nazw metryki określonej metryki niestandardowej można znaleźć, przeglądając metryki niestandardowe za pośrednictwem witryny Azure Portal

Wiele zasobów

Usługa Azure Monitor obsługuje monitorowanie wielu zasobów tego samego typu przy użyciu jednej reguły alertu dotyczącego metryk dla zasobów, które istnieją w tym samym regionie świadczenia usługi Azure. Ta funkcja jest obecnie obsługiwana tylko w chmurze publicznej platformy Azure i dotyczy tylko maszyn wirtualnych, baz danych programu SQL Server, elastycznych pul programu SQL Server i urządzeń Azure Stack Edge. Ponadto ta funkcja jest dostępna tylko dla metryk platformy i nie jest obsługiwana w przypadku metryk niestandardowych.

Reguła alertów progów dynamicznych może również pomóc w tworzeniu dostosowanych progów dla setek serii metryk (nawet różnych typów) jednocześnie, co skutkuje mniejszą liczbą reguł alertów do zarządzania.

W tej sekcji opisano szablony usługi Azure Resource Manager dla trzech scenariuszy monitorowania wielu zasobów przy użyciu jednej reguły.

  • Monitorowanie wszystkich maszyn wirtualnych (w jednym regionie świadczenia usługi Azure) w co najmniej jednej grupie zasobów.
  • Monitorowanie wszystkich maszyn wirtualnych (w jednym regionie świadczenia usługi Azure) w ramach subskrypcji.
  • Monitorowanie listy maszyn wirtualnych (w jednym regionie świadczenia usługi Azure) w subskrypcji.

Uwaga

  • W regule alertu metryki, która monitoruje wiele zasobów, dozwolony jest tylko jeden warunek.
  • Jeśli tworzysz alert metryki dla pojedynczego zasobu, szablon używa ResourceId zasobu docelowego. Jeśli tworzysz alert metryki dla wielu zasobów, szablon używa scopewartości , TargetResourceTypei TargetResourceRegion dla zasobów docelowych.

Alert dotyczący progu statycznego dla wszystkich maszyn wirtualnych w co najmniej jednej grupie zasobów

Ten szablon utworzy statyczną regułę alertu metryki progowej, która monitoruje procentowe użycie procesora CPU dla wszystkich maszyn wirtualnych (w jednym regionie świadczenia usługi Azure) w co najmniej jednej grupie zasobów.

Zapisz poniższy kod json jako all-vms-in-resource-group-static.json na potrzeby tego przewodnika.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full path of the resource group(s) where target resources to be monitored are in. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName')
@minLength(1)
param targetResourceGroup array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceGroup
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceGroup": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alert progów dynamicznych dla wszystkich maszyn wirtualnych w co najmniej jednej grupie zasobów

Ten przykład tworzy regułę alertu metryki progów dynamicznych, która monitoruje procentowe użycie procesora CPU dla wszystkich maszyn wirtualnych w jednym regionie świadczenia usługi Azure w co najmniej jednej grupie zasobów.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full path of the resource group(s) where target resources to be monitored are in. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName')
@minLength(1)
param targetResourceGroup array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceGroup
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert with Dynamic Thresholds via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceGroup": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alert dotyczący progu statycznego dla wszystkich maszyn wirtualnych w subskrypcji

W tym przykładzie jest tworzona statyczna reguła alertu dotyczącego metryki progowej, która monitoruje procentowe użycie procesora CPU dla wszystkich maszyn wirtualnych w jednym regionie świadczenia usługi Azure w ramach subskrypcji.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Azure Resource Manager path up to subscription ID. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000')
@minLength(1)
param targetSubscription string

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      targetSubscription
    ]
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource sub level metric alert via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource sub level metric alert created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetSubscription": {
      "value": "/subscriptions/replace-with-subscription-id"
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alert progów dynamicznych dla wszystkich maszyn wirtualnych w subskrypcji

Ten przykład tworzy regułę alertu metryki Progi dynamiczne, która monitoruje procentowe użycie procesora CPU dla wszystkich maszyn wirtualnych (w jednym regionie platformy Azure) w subskrypcji.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Azure Resource Manager path up to subscription ID. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000')
@minLength(1)
param targetSubscription string

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      targetSubscription
    ]
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource sub level metric alert with Dynamic Thresholds via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource sub level metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetSubscription": {
      "value": "/subscriptions/replace-with-subscription-id"
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alert dotyczący progu statycznego na liście maszyn wirtualnych

Ten przykład tworzy statyczną regułę alertu metryki progowej, która monitoruje procentowe użycie procesora CPU dla listy maszyn wirtualnych w jednym regionie platformy Azure w ramach subskrypcji.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('array of Azure resource Ids. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroup/resource-group-name/Microsoft.compute/virtualMachines/vm-name')
@minLength(1)
param targetResourceId array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceId
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert by list via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert by list created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceId": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1/Microsoft.Compute/virtualMachines/replace-with-vm-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2/Microsoft.Compute/virtualMachines/replace-with-vm-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alert dotyczący progów dynamicznych na liście maszyn wirtualnych

Ten przykład tworzy regułę alertu metryki progów dynamicznych, która monitoruje procentowe użycie procesora CPU dla listy maszyn wirtualnych w jednym regionie świadczenia usługi Azure w ramach subskrypcji.

Plik szablonu

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('array of Azure resource Ids. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroup/resource-group-name/Microsoft.compute/virtualMachines/vm-name')
@minLength(1)
param targetResourceId array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceId
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert with Dynamic Thresholds by list via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert with Dynamic Thresholds by list created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceId": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1/Microsoft.Compute/virtualMachines/replace-with-vm-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2/Microsoft.Compute/virtualMachines/replace-with-vm-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Test dostępności z alertem metryki

Testy dostępności usługi Application Insights ułatwiają monitorowanie dostępności witryny internetowej/aplikacji z różnych lokalizacji na całym świecie. Alerty dotyczące testu dostępności powiadamiają o tym, czy testy dostępności kończą się niepowodzeniem z określonej liczby lokalizacji. Alerty testu dostępności tego samego typu zasobu co alerty metryk (Microsoft.Insights/metricAlerts). Poniższy przykład tworzy prosty test dostępności i skojarzony alert.

Uwaga

& to odwołanie do jednostki HTML dla elementu &. Parametry adresu URL są nadal oddzielone jednym elementem i, ale jeśli w kodzie HTML zostanie wymieniony adres URL, musisz go zakodować. Tak więc, jeśli masz jakiekolwiek "&" w wartości parametru pingURL, musisz go uruchomić za pomocą ciągu "&"

Plik szablonu

param appName string
param pingURL string
param pingText string = ''
param actionGroupId string
param location string

var pingTestName = 'PingTest-${toLower(appName)}'
var pingAlertRuleName = 'PingAlert-${toLower(appName)}-${subscription().subscriptionId}'

resource pingTest 'Microsoft.Insights/webtests@2020-10-05-preview' = {
  name: pingTestName
  location: location
  tags: {
    'hidden-link:${resourceId('Microsoft.Insights/components', appName)}': 'Resource'
  }
  properties: {
    Name: pingTestName
    Description: 'Basic ping test'
    Enabled: true
    Frequency: 300
    Timeout: 120
    Kind: 'ping'
    RetryEnabled: true
    Locations: [
      {
        Id: 'us-va-ash-azr'
      }
      {
        Id: 'emea-nl-ams-azr'
      }
      {
        Id: 'apac-jp-kaw-edge'
      }
    ]
    Configuration: {
      WebTest: '<WebTest   Name="${pingTestName}"   Enabled="True"         CssProjectStructure=""    CssIteration=""  Timeout="120"  WorkItemIds=""         xmlns="http://microsoft.com/schemas/VisualStudio/TeamTest/2010"         Description=""  CredentialUserName=""  CredentialPassword=""         PreAuthenticate="True"  Proxy="default"  StopOnError="False"         RecordedResultFile=""  ResultsLocale="">  <Items>  <Request Method="GET"    Version="1.1"  Url="${pingURL}" ThinkTime="0"  Timeout="300" ParseDependentRequests="True"         FollowRedirects="True" RecordResult="True" Cache="False"         ResponseTimeGoal="0"  Encoding="utf-8"  ExpectedHttpStatusCode="200"         ExpectedResponseUrl="" ReportingName="" IgnoreHttpStatusCode="False" />        </Items>  <ValidationRules> <ValidationRule  Classname="Microsoft.VisualStudio.TestTools.WebTesting.Rules.ValidationRuleFindText, Microsoft.VisualStudio.QualityTools.WebTestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" DisplayName="Find Text"         Description="Verifies the existence of the specified text in the response."         Level="High"  ExecutionOrder="BeforeDependents">  <RuleParameters>        <RuleParameter Name="FindText" Value="${pingText}" />  <RuleParameter Name="IgnoreCase" Value="False" />  <RuleParameter Name="UseRegularExpression" Value="False" />  <RuleParameter Name="PassIfTextFound" Value="True" />  </RuleParameters> </ValidationRule>  </ValidationRules>  </WebTest>'
    }
    SyntheticMonitorId: pingTestName
  }
}

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: pingAlertRuleName
  location: 'global'
  tags: {
    'hidden-link:${resourceId('Microsoft.Insights/components', appName)}': 'Resource'
    'hidden-link:${pingTest.id}': 'Resource'
  }
  properties: {
    description: 'Alert for web test'
    severity: 1
    enabled: true
    scopes: [
      pingTest.id
      resourceId('Microsoft.Insights/components', appName)
    ]
    evaluationFrequency: 'PT1M'
    windowSize: 'PT5M'
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.WebtestLocationAvailabilityCriteria'
      webTestId: pingTest.id
      componentId: resourceId('Microsoft.Insights/components', appName)
      failedLocationCount: 2
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Plik parametrów

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "appName": {
      "value": "Replace with your Application Insights resource name"
    },
    "pingURL": {
      "value": "https://www.yoursite.com"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/microsoft.insights/actiongroups/replace-with-action-group-name"
    },
    "location": {
      "value": "Replace with the location of your Application Insights resource"
    },
    "pingText": {
      "defaultValue": "Optional parameter that allows you to perform a content-match for the presence of a specific string within the content returned from a pingURL response",
      "type": "String"
    },
  }
}

Dodatkowa konfiguracja parametru dopasowania pingText zawartości jest kontrolowana w Configuration/Webtest części pliku szablonu. W szczególności w poniższej sekcji:

<RuleParameter Name=\"FindText\" Value=\"',parameters('pingText'), '\" />
<RuleParameter Name=\"IgnoreCase\" Value=\"False\" />
<RuleParameter Name=\"UseRegularExpression\" Value=\"False\" />
<RuleParameter Name=\"PassIfTextFound\" Value=\"True\" />

Lokalizacje testu

Id Region (Region)
emea-nl-ams-azr West Europe
us-ca-sjc-azr Zachodnie stany USA
emea-ru-msa-edge Południowe Zjednoczone Królestwo
emea-se-sto-edge Zachodnie Zjednoczone Królestwo
apac-sg-sin-azr Southeast Asia
us-tx-sn1-azr South Central US
us-il-ch1-azr Północno-środkowe stany USA
emea-gb-db3-azr Europa Północna
apac-jp-kaw-edge Japonia Wschodnia
emea-fr-pra-edge Francja Środkowa
emea-ch-zrh-edge Francja Południowa
us-va-ash-azr Wschodnie stany USA
apac-hk-hkn-azr Azja Wschodnia
us-fl-mia-edge Środkowe stany USA
latam-br-gru-edge Brazylia Południowa
emea-au-syd-edge Australia Wschodnia

Lokalizacje testowe dla instytucji rządowych USA

Id Region (Region)
usgov-va-azr USGov Virginia
usgov-phx-azr USGov Arizona
usgov-tx-azr USGov Texas
usgov-ddeast-azr USDoD East
usgov-ddcentral-azr USDoD Central

Następne kroki