Bewerken

Delen via

Indicating Received Ethernet Frames

  • Artikel

The Windows TCP/IP protocol driver imposes a set of requirements for receiving Ethernet frames. Any driver that originates receive indications of Ethernet frames or modifies receive indications of underlying drivers must support the general requirements that TCP/IP imposes. These drivers include Ethernet miniport drivers, MUX intermediate drivers, and filter drivers.

Note  If a driver does not follow these requirements, overlying drivers (such as the TCP/IP transport, MUX intermediate drivers, and filter drivers) might behave unpredictably.

Drivers that originate Ethernet receive indications must support the following requirements:

  • The driver must allocate a NET_BUFFER_LIST structure for the received Ethernet frame. Each NET_BUFFER_LIST structure must include the out-of-band (OOB) data that is defined in the NetBufferListInfo member of the NET_BUFFER_LIST required for the particular use.

  • The driver must allocate a NET_BUFFER structure for the frame and link it to a NET_BUFFER_LIST structure. The Ethernet miniport must assign exactly one NET_BUFFER structure to a NET_BUFFER_LIST structure when indicating received data. This restriction applies only to the Ethernet receive path. It is not applicable to the other media types, such as the native 802.11 wireless LAN interface. or NDIS in general.

  • Starting with NDIS 6.1, under certain scenarios, a NET_BUFFER structure can be associated with multiple memory descriptor lists (MDLs) for the received Ethernet frame. Even though a NET_BUFFER_LIST structure must contain a single NET_BUFFER structure, using multiple MDLs allows the driver to split the received packet data into separate buffers.

    For example, Ethernet drivers that support the header-data split interface split a received Ethernet frame by using a linked list of multiple MDLs that are associated with a single NET_BUFFER structure. For more information, see Header-Data Split.

    For simplicity and performance reasons, we highly recommend that drivers that don't support header-data split use only one MDL for each NET_BUFFER structure.

    Note  In NDIS 6.0 for Windows Vista, each NET_BUFFER structure must contain only one MDL.

  • Drivers must not split received Ethernet frames in the middle of the IP header, IPv4 options, IPsec headers, IPv6 extension headers, or upper-layer protocol headers, unless the first MDL contains at least as many bytes as NDIS specified for the lookahead size.

NDIS protocol and filter drivers must support split Ethernet frames in receive indications if such split frames comply with the restrictions that are defined in the preceding list item. The restrictions ensure that the protocol and filter drivers are compatible with future Windows versions.