WIA_IPA_DATATYPE
The WIA_IPA_DATATYPE property contains the current data type setting for a device. A WIA minidriver creates and maintains this property.
Property Type: VT_I4
Valid Values: WIA_PROP_LIST
Access Rights: Read/write
Remarks
An application reads the WIA_IPA_DATATYPE property to determine the data type of an image. The application writes this property to set the current data type of the image that is about to be transferred.
The following table describes the constants that are valid with WIA_IPA_DATATYPE when the WIA_IPA_FORMAT property is not set to WiaImgFmt_RAW.
| Data type | Description |
|---|---|
| WIA_DATA_AUTO | This value is valid for all programmable image data source items, including the Flatbed and Feeder. When this value is supported by the WIA mini-driver the WIA application client can set: WIA_IPA_DATATYPE in order to enable automatic color detection at the device. When WIA_DATA_AUTO is set, the WIA mini-driver must update WIA_IPA_DEPTH on the same item to WIA_DEPTH_AUTO (which must be a supported value if the device supports automatic color). When the WIA_IPA_DEPTH value WIA_DEPTH_AUTO is supported, the WIA_IPA_DATATYPE value WIA_DATA_AUTO is no longer optional and becomes a required value. |
| WIA_DATA_COLOR | Scan data is red-green-blue (RGB). The full color format is described by using the following WIA properties: WIA_IPA_CHANNELS_PER_PIXEL WIA_IPA_BITS_PER_CHANNEL WIA_IPA_PLANAR WIA_IPA_PIXELS_PER_LINE WIA_IPA_BYTES_PER_LINE WIA_IPA_NUMBER_OF_LINES |
| WIA_DATA_COLOR_DITHER | The same as WIA_DATA_COLOR, except that the data is dithered by using the currently selected dither pattern. |
| WIA_DATA_COLOR_THRESHOLD | Color threshold data. |
| WIA_DATA_DITHER | Scan data is dithered by using the currently selected dither pattern. |
| WIA_DATA_GRAYSCALE | Scan data represents intensity. The palette is a fixed, equally spaced grayscale with a depth that the WIA_IPA_DEPTH property specifies. |
| WIA_DATA_THRESHOLD | The threshold is one bit per pixel of black-and-white data. Data over the current value of WIA_IPS_THRESHOLD is converted to white; data under this value is converted to black. |
The WIA_IPA_DATATYPE property is also used to describe the type of RAW data transfer to be used when the application sets the WIA_IPA_FORMAT property to the value WiaImgFmt_RAW. The driver should set the WIA_IPA_DATATYPE property to a list of allowed values from which the application can pick.
The following table lists the constants that are valid with WIA_IPA_DATATYPE when WIA_IPA_FORMAT is set to WiaImgFmt_RAW.
| Data type | Description |
|---|---|
| WIA_DATA_GRAYSCALE | Scan data represents intensity. The palette is a fixed, equally spaced grayscale with a depth that the WIA_IPA_DEPTH property specifies. WIA_IPA_RAW_BITS_PER_CHANNEL property must be set to 1. |
| WIA_DATA_RAW_BGR | Scan data is in the BGR (blue-green-red) colorspace. The full color format is described by using the following WIA properties: WIA_IPA_CHANNELS_PER_PIXEL WIA_IPA_BITS_PER_CHANNEL WIA_IPA_PIXELS_PER_LINE WIA_IPA_BYTES_PER_LINE WIA_IPA_NUMBER_OF_LINES WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 3. |
| WIA_DATA_RAW_CMY | Scan data is in the cyan-magenta-yellow (CMY) colorspace. The full color format is described by using the same WIA properties that are listed for WIA_DATA_RAW_BGR. WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 3. |
| WIA_DATA_RAW_CMYK | Scan data is in the cyan-magenta-yellow-black (CMYK) colorspace. The full color format is described by using the same WIA properties that are listed for WIA_DATA_RAW_BGR. WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 4. |
| WIA_DATA_RAW_RGB | Scan data is in the red-green-blue (RGB) colorspace. The full color format is described using the same WIA properties as in WIA_DATA_RAW_BGR. WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 3. |
| WIA_DATA_RAW_YUV | Scan data is in the luminance-blue difference-red difference (YUV) colorspace. The full color format is described by using the same WIA properties that are listed for WIA_DATA_RAW_BGR. WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 3. |
| WIA_DATA_RAW_YUVK | Scan data is in the luminance-blue difference-red difference-black (YUVK) colorspace. The full color format is described by using the same WIA properties that are listed for WIA_DATA_RAW_BGR. WIA_IPA_RAW_BITS_PER_CHANNEL must be set to 4. |
If you can set the device to only a single value, create a WIA_PROP_LIST type and place the valid value in it.
Check the WIA_IPA_DEPTH property to determine the bit depth.
The WIA_IPA_DATATYPE property usually contains a single value for cameras.
Requirements
Header: wiadef.h (include Wiadef.h)