Vendor-extended commands

An application can send an arbitrary command to the device through the IWiaItemExtras::Escape method, which is described in the Microsoft Windows SDK documentation. By calling QueryInterface on the root item, you can retrieve a pointer to the IWiaItemExtras interface. The application can then construct a PTP command using any opcode and parameters, and send this command to the device. The application also can send data to or receive data from the device.

The device informs the application of the outcome of the operation when the IWiaItemExtras::Escape method returns, filling in a response code and response parameters in a PTP_VENDOR_DATA_OUT structure. The SessionId and TransactionId members of the PTP_VENDOR_DATA_IN structure are ignored. The driver supplies correct values for these.

For vendor-defined commands other than ESCAPE_PTP_CLEAR_STALLS, a special flag, ESCAPE_PTP_VENDOR_COMMAND, must be combined (using an OR operator) with the command used in the IWiaItemExtras::Escape method. If a vendor-defined command creates or deletes an object on the device using the following described flags, the driver adds or removes the object from its internal structures and generates a WIA event. All other standard commands should be issued through the appropriate WIA interface.

The first parameter to IWiaItemExtras::Escape is the combination of one or more of the following flags:

Escape Code	Meaning
ESCAPE_PTP_ADD_OBJ_CMD	An object is being added and the handle for the object is in one of the command parameters.
ESCAPE_PTP_REM_OBJ_CMD	An object is being removed and the handle for the object is in one of the command parameters.
ESCAPE_PTP_ADD_OBJ_RESP	An object is being added and the handle for the object is in one of the response parameters.
ESCAPE_PTP_REM_OBJ_RESP	An object is being removed and the handle for the object is in one of the response parameters.
ESCAPE_PTP_ADDREM_PARM1	The handle for the added or removed object is in the first parameter of the command or response.
ESCAPE_PTP_ADDREM_PARM2	The handle for the added or removed object is in the second parameter of the command or response.
ESCAPE_PTP_ADDREM_PARM3	The handle for the added or removed object is in the third parameter of the command or response.
ESCAPE_PTP_ADDREM_PARM4	The handle for the added or removed object is in the fourth parameter of the command or response.
ESCAPE_PTP_ADDREM_PARM5	The handle for the added or removed object is in the fifth parameter of the command or response.
ESCAPE_PTP_CLEAR_STALLS	Clear any error conditions caused by a vendor-extended command. This flag cannot be used in combination with any of the other flags. For more information about this flag, see the note that follows this table.
ESCAPE_PTP_VENDOR_COMMAND	The command is a vendor-extended command.

When an application calls IWiaItemExtras::Escape with the ESCAPE_PTP_CLEAR_STALL flag as the first argument to this method, the driver issues the PTP Get Device Status request to determine whether any endpoints are in a STALL condition. If the Get Device Status command succeeds, the driver issues the IOCTL_RESET_PIPE USB control code for each such endpoint. If the Get Device Status command fails, the driver issues a PTP Device Reset request. Get Device Status and Device Reset are described in the PIMA 15740:2000 standard, First Edition, and Revision 1.0 of the USB Still Image Capture Device Definition (USB SICDD).

The following sample code illustrates how to use the vendor-extended command interface. Be sure that your code includes the ptpusd.h header, because it contains the definitions of the escape codes and other constants, and the PTP_VENDOR_DATA_IN and PTP_VENDOR_DATA_OUT structures. The IWiaItemExtras interface is obtained by using a call to QueryInterface on the root item. A pointer to this root item, pIWiaRootItem, can be obtained, for example, by a call to IWiaDevMgr::SelectDeviceDlg (described in the Microsoft Windows SDK documentation).

//
// Test IWiaItemExtras::Escape method
//
HRESULT hr = S_OK;
IWiaItemExtras *pIWiaItemExtras = NULL;

hr = pIWiaRootItem->QueryInterface(IID_IWiaItemExtras,
                                   (VOID **) &pIWiaItemExtras);
if (FAILED(hr)) {
    MessageBox("QueryInterface for IWiaItemExtras failed");
    return;
}

PTP_VENDOR_DATA_IN *pDataIn = NULL;
PTP_VENDOR_DATA_OUT *pDataOut = NULL;
DWORD dwDataInSize = SIZEOF_REQUIRED_VENDOR_DATA_IN;
DWORD dwDataOutSize = SIZEOF_REQUIRED_VENDOR_DATA_OUT + 0x1000;
DWORD dwActualDataOutSize = 0;

pDataIn = (PTP_VENDOR_DATA_IN *) CoTaskMemAlloc(dwDataInSize);
if (!pDataIn) {
    MessageBox("CoTaskMemAlloc failed");
    return;
}

pDataOut = (PTP_VENDOR_DATA_OUT *) CoTaskMemAlloc(dwDataOutSize);
if (!pDataOut) {
 CoTaskMemFree(pDataIn);
    MessageBox("CoTaskMemAlloc failed");
    return;
}
ZeroMemory(pDataIn, dwDataInSize);
ZeroMemory(pDataOut, dwDataOutSize);

pDataIn->OpCode = 0x1001;
pDataIn->SessionId = 0;     // The driver will fill this in.
pDataIn->TransactionId = 0; // The driver will fill this in.
pDataIn->NumParams = 0;

//
// pDataIn->NextPhase informs the PTP driver whether to 
// read data from the device (as shown), or
// write data to the device (use PTP_NEXTPHASE_WRITE_DATA),
// to neither read nor write data (use PTP_NEXTPHASE_NO_DATA).
//
pDataIn->NextPhase = PTP_NEXTPHASE_READ_DATA;

hr = pIWiaItemExtras->Escape(ESCAPE_PTP_VENDOR_COMMAND,
                             (BYTE *) pDataIn, dwDataInSize,
                             (BYTE *) pDataOut, dwDataOutSize,
                             &dwActualDataOutSize);

if (FAILED(hr)) {
    MessageBox("Escape failed");
    return;
}

//
// Data returned from device is located at pDataOut->VendorReadData.
//