Bewerken

Delen via

Providing seamless state transitions in WDDM 1.2 and later

  • Artikel

Starting in Windows 8, several features help to minimize or eliminate screen flashes and flickers during the boot process, during transitions from lower power states, and during transitions back to operating system control in driver upgrades or system bug checks. In addition, system firmware on Windows 8 and later computers must detect native resolution and timing of the integrated display panel at the time of power up and hand off this information to the operating system. Windows Display Driver Model (WDDM) 1.2 and later display miniport drivers must support this behavior.

Minimum WDDM version 1.2
Minimum Windows version 8
Driver implementation—Full graphics and Display only Mandatory
WHCK requirements and tests

System.Client.Firmware.UEFI.GOP.Display

Device.Graphics…PnpStopStartSupport

Device.Graphics…DisplayOutputControl

Transition from firmware to operating system

All Windows 8 systems targeted for client SKUs must support the Unified Extensible Firmware Interface (UEFI) Graphics Output Protocol (GOP). During the boot phase, the GOP sets the native timing and native resolution on the integrated display panel of the system. When the operating system is ready to take over ownership of the display, the GOP hands off a frame buffer that can be used to scan out to the display. At this time the operating system doesn't attempt to reset the display timings or the resolution but simply uses the provided frame buffer, thereby eliminating one screen flash.

Hardware certification requirements

For info on requirements that hardware devices must meet when they implement this feature, refer to the relevant WHCK documentation on System.Client.Firmware.UEFI.GOP.Display.

Transition from operating system to driver

When the operating system hands ownership of the display to the WDDM driver after a boot, it initiates a Plug and Play (PnP) start of the device by calling the DxgkDdiStartDevice function. Alternately, after resuming from hibernation the operating system starts the device by calling the DxgkDdiSetPowerState function with the DeviceUid parameter set to DISPLAY_ADAPTER_HW_ID (defined in Video.h). At this time typically the screen is blanked out (renders as black) while the WDDM graphics driver takes control.

The driver can call the DxgkCbAcquirePostDisplayOwnership function (available starting in Windows 8) to query the operating system for the exact state of the current frame buffer and the display mode that was set by the firmware and boot loader. With the information in the DXGK_DISPLAY_INFORMATION structure retrieved by this function, it's possible for the driver to keep the display controller active and not cause a re-synchronization of the monitor. Because the driver also has detailed information about the frame buffer, it's possible to perform a smoother transition.

More details on PnP start are given in Plug and Play (PnP) in WDDM 1.2 and later.

Transition from driver to operating system

The operating system can request a PnP stop of the display device by calling the DxgkDdiStopDevice function. At this time typically the screen is blanked out (renders as black) while the operating system takes over the display control. The operating system can call the DxgkDdiStopDeviceAndReleasePostDisplayOwnership function (available starting in Windows 8) that requires the WDDM driver to set up a frame buffer configured for scan out. The operating system can render into this frame buffer while it's in control of the display, making it possible to perform a smooth transition.

More details on PnP stop, including additional scenarios, are given in Plug and Play (PnP) in WDDM 1.2 and later.

Hardware certification requirements

For more info about this handoff, refer to the relevant WHCK documentation on Device.Graphics…PnpStopStartSupport.

Transition to operating system without disabling driver

Sometimes the operating system experiences an unrecoverable error and has to issue a system bug check. When this happens, there are certain cases where the operating system has to take control of the display but doesn't have the ability to stop the WDDM driver. WDDM 1.2 and later drivers are required to implement the DxgkDdiSystemDisplayEnable and DxgkDdiSystemDisplayWrite functions, which let the operating system seamlessly transition to a state where it can display the error screen while maintaining the graphical interface at a high resolution and color depth. This transition eliminates a jarring user experience.

Hardware certification requirements

For info on requirements that hardware devices must meet when they implement this feature, refer to the relevant WHCK documentation on Device.Graphics…DisplayOutputControl.

Windows 8 firmware mode changes

These are changes to the firmware's display mode before the firmware hands off control to the operating system:

WDDM 1.2 and later drivers (DXGKDDI_INTERFACE_VERSION >= DXGKDDI_INTERFACE_VERSION_WIN8)
To further eliminate display flashes, starting with Windows 8, Int10 mode change requests are not called on the firmware for WDDM 1.2 and later drivers.

In addition, if a mode change occurs while the monitor is turned off, the operating system calls the DxgkDdiCommitVidPn function only once, with the pCommitVidPnArg parameter set to the value it would have if the monitor were turned on, and the PathPoweredOff member of pCommitVidPnArg->Flags set to TRUE.

WDDM 1.0 and 1.1 drivers (DXGKDDI_INTERFACE_VERSION < DXGKDDI_INTERFACE_VERSION_WIN8)
For WDDM versions 1.0 and 1.1 drivers running on Windows 8, during the boot process or when resuming from hibernation, calls into Int10 VGA mode 0x12 are made that set the display resolution to the monitor's native high resolution. Prior to Windows 8, an Int10 VGA mode 0x12 call set the display resolution to 640 x 480 pixels, at 16 bits per pixel, with no flashing cursor, to show the operating system splash screen image.

However, for WDDM versions 1.0 and 1.1 drivers that indicate they don't support high-resolution mode, starting in Windows 8 a boot into VGA mode 0x12 sets the display resolution to 640 x 480 pixels, at 16 bits per pixel, with no flashing cursor. When the system resumes from hibernation, the display resolution will still be set to the monitor's native high resolution.

In addition, if a mode change occurs while the monitor is turned off, the operating system calls the DxgkDdiCommitVidPn function as described above for WDDM 1.2 drivers, plus it calls DxgkDdiCommitVidPn a second time with an empty video present network (VidPN) in pCommitVidPnArg->hFunctionalVidPn , and none of the flag values set in pCommitVidPnArg->Flags.

This two-part calling sequence also occurs when the system resumes after hibernation and monitor sync generation is to remain enabled. In this case the driver should take no action when it receives the second call to DxgkDdiCommitVidPn.