WWAN_UICC_FILE_PATH structure (wwan.h)
The WWAN_UICC_FILE_PATH structure describes file path information about a UICC file.
Syntax
typedef struct _WWAN_UICC_FILE_PATH {
ULONG Version;
BYTE AppIdLength;
BYTE AppId[WWAN_UICC_APP_ID_MAX_LEN];
BYTE FilePathLength;
BYTE FilePath[WWAN_UICC_FILE_PATH_MAX_LEN];
} WWAN_UICC_FILE_PATH, *PWWAN_UICC_FILE_PATH;
Members
Version
The version number of the structure that follows. In Windows 10, version 1903, this version must be set to 1.
AppIdLength
The size of the application ID, in bytes, as defined in Section 8.3 of the ETSI TS 102 221 technical specification. For 2G cards, this field must be set to zero (0).
AppId[WWAN_UICC_APP_ID_MAX_LEN]
The application ID. Only the first AppIdLength bytes are meaningful. If the application ID is longer than WWAN_UICC_APP_ID_MAX_LEN bytes, then AppIdLength specifies the actual length but only the first WWAN_UICC_APP_ID_MAX_LEN bytes are in this field.
FilePathLength
The size of the file path, in bytes.
FilePath[WWAN_UICC_FILE_PATH_MAX_LEN]
The file path, which is an array of 16-bit file IDs. The first ID must be either 0x7FFF or 0x3F00. If the first ID is 0x7FFF, then the path is relative to the ADF of the application designated by AppId. Otherwise, it is an absolute path starting from the MF.
Remarks
This structure is used in the NDIS_WWAN_UICC_FILE_PATH structure.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 10, version 1903 |
| Header | wwan.h |