WWAN_SAR_TRANSMISSION_STATUS_INFO structure (wwan.h)
The WWAN_SAR_TRANSMISSION_STATUS_INFO structure describes a mobile broadband (MBB) modem's Specific Absorption Rate (SAR) transmission status.
Syntax
typedef struct _WWAN_SAR_TRANSMISSION_STATUS_INFO {
WWAN_SAR_TRANSMISSION_STATUS_NOTIFICATION_STATE ChannelNotification;
WWAN_SAR_TRANSMISSION_STATUS TransmissionStatus;
ULONG HysteresisTimer;
} WWAN_SAR_TRANSMISSION_STATUS_INFO, *PWWAN_SAR_TRANSMISSION_STATUS_INFO;
Members
ChannelNotification
A WWAN_SAR_TRANSMISSION_STATUS_NOTIFICATION_STATE value that specifies whether SAR transmission status notifications are enabled or disabled for the modem.
TransmissionStatus
A WWAN_SAR_TRANSMISSION_STATUS value that describes whether the modem has transmit (Tx) traffic during the hysteresis timer.
HysteresisTimer
A Hysteresis indicator that is used by the modem to determine when to send a NDIS_STATUS_WWAN_SAR_TRANSMISSION_STATUS notification to the host. This value is the timer the modem sees as a continuous no-transmit activity before it sends an OFF indicator to host. This timer should be set in seconds, ranging from 1 second to 5 seconds.
Remarks
This structure is used in the NDIS_WWAN_SAR_TRANSMISSION_STATUS_INFO structure.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 10, version 1703 |
| Header | wwan.h |
See also
OID_WWAN_SAR_TRANSMISSION_STATUS
NDIS_STATUS_WWAN_SAR_TRANSMISSION_STATUS
NDIS_WWAN_SAR_TRANSMISSION_STATUS_INFO