WWAN_CONTEXT_STATE structure (wwan.h)

The WWAN_CONTEXT_STATE structure represents the Packet Data Protocol (PDP) context state of the MB device.

Syntax

typedef struct _WWAN_CONTEXT_STATE {
  ULONG                    uNwError;
  ULONG                    ConnectionId;
  WWAN_ACTIVATION_STATE    ActivationState;
  WWAN_VOICE_CALL_STATE    VoiceCallState;
  WWAN_IP_TYPE             IPType;
  WWAN_CONNECTION_MEDIA    ConnectionMedia;
  WCHAR                    AccessString[WWAN_ACCESSSTRING_LEN];
  WWAN_SINGLE_NSSAI        Snssai;
  ULONG                    FoundMatchingConnectionId;
  WWAN_OFFSET_SIZE_ELEMENT TrafficParameters;
} WWAN_CONTEXT_STATE, *PWWAN_CONTEXT_STATE;

Members

uNwError

A network-specific error. The following table shows the connection failure values as documented in the 3GPP TS 24.008 Specification.

3GPP 24.008 cause code	Interpretation of cause code
8 - Operator determined barring	Packet data service is blocked by the operator.
26 - Insufficient resources	Context cannot be activated because of insufficient resources on network.
27 - Missing or unknown Access Point Name (APN)	No APN or unknown APN is provided in the activation request.
29 , 30, 31 - User authentication failed	Wrong user name or password provided in the activation request.
32 - Service option not supported	GPRS is not supported by the network.
33 - Requested service option is not subscribed	Requested service (GPRS) is not subscribed by the user.
34 - Service option is temporarily out of order	Packet data service is temporarily out of order. User must retry later.
43 - Unknown Packet Data Protocol (PDP) context	No APN or unknown APN is provided in the activation request.

ConnectionId

The MB Service specifies a value for this member at the time of the connect request by using OID_WWAN_CONNECT. Miniport drivers must copy this value and use it when they notify the MB Service on subsequent connection state changes.

ActivationState

The current activation state of the device.

VoiceCallState

The current voice call state of the device.

IPType

A value from the WWAN_IP_TYPE enumeration that specifies the type of IP.

ConnectionMedia

The media type for an established context/session.

AccessString[WWAN_ACCESSSTRING_LEN]

The selected APN/DNN for an established context/session.

Snssai

A WWAN_SINGLE_NSSAI structure representing a single Network Slice Selection Assistance Information (NSSAI).

FoundMatchingConnectionId

Only valid if the status is WWAN_STATUS_SESSION_ALREADY_EXISTS.

TrafficParameters

A WWAN_OFFSET_SIZE_ELEMENT structure. Only valid if the status is WWAN_STATUS_DESSOCIATION_NEEDED_FOR_APPLICATION. The first 4 bytes are the offset to the DataBuffer containing the raw data of MBIM_TLV_TYPE_TRAFFIC_PARAMETERS, in bytes, calculated from the beginning of WWAN_SET_CONTEXT_STATE. The second 4 bytes are the size of the raw data of MBIM_TLV_TYPE_TRAFFIC_PARAMETERS, in bytes.

Remarks

Set OID requests as well as unsolicited status events use the uNwError member. If there is no network specific error or the network specific error is not known, miniport drivers should set this member to 0.

The following points provide guidelines on returning network specific error in different scenarios:

• If a set request fails, miniport drivers should return the network specific error code. In this case, the miniport driver should set the uStatus member of the NDIS_WWAN_CONTEXT_STATE structure to WWAN_STATUS_FAILURE, or a more specific error like WWAN_STAUS_INVALID_ACCESS_STRING or WWAN_STATUS_INVALID_USER_NAME_PWD, and set the uNwError member to the network specific error code.
• Whenever the device context activation state changes because of network initiated context deactivate then unsolicited status events should include the network specific error. In this case, the miniport driver should set the uStatus member of the NDIS_WWAN_CONTEXT_STATE structure to WWAN_STATUS_SUCCESS, and set the uNwError member to the network specific error code.

Miniport drivers can provide additional error codes as defined by the GSM standards specification of context activation error codes returned by the network. For example, miniport drivers can communicate the 3GPP specification TS 24.008 context activation error codes, such as error code 8 (Operator determined barring), to the MB Service through the uNwError member. There is no standard available for CDMA-based network specific error codes. CDMA-based devices and networks can return network specific error code information using the uNwError member.

In case of response to the NDIS_WWAN_SET_CONTEXT_STATE, use this member to provide additional error codes returned by the network.

Requirements

Requirement	Value
Minimum supported client	Available in Windows 8 and later versions of Windows.
Header	wwan.h (include Wwan.h)

See also

NDIS_WWAN_CONTEXT_STATE

WWAN_ACTIVATION_STATE

WWAN_VOICE_CALL_STATE