IWDFIoRequest2::RetrieveInputBuffer method (wudfddi.h)

Artikel
10/21/2021

[Warning: UMDF 2 is the latest version of UMDF and supersedes UMDF 1. All new UMDF drivers should be written using UMDF 2. No new features are being added to UMDF 1 and there is limited support for UMDF 1 on newer versions of Windows 10. Universal Windows drivers must use UMDF 2. For more info, see Getting Started with UMDF.]

The RequestRetrieveInputBuffer method retrieves an I/O request's input buffer.

Syntax

HRESULT RetrieveInputBuffer(
  [in]            SIZE_T MinimumRequiredCb,
  [out]           PVOID  *Buffer,
  [out, optional] SIZE_T *BufferCb
);

Parameters

[in] MinimumRequiredCb

The minimum buffer size, in bytes, that the driver needs to process the I/O request. This value can be zero if there is no minimum buffer size.

[out] Buffer

A pointer to a location that receives the buffer's address.

[out, optional] BufferCb

A pointer to a location that receives the buffer's size, in bytes. This parameter is optional and can be NULL.

Return value

RequestRetrieveInputBuffer returns S_OK if the operation succeeds. Otherwise, this method can return the following value:

Return code	Description
HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER)	The I/O request did not provide an input buffer, or the size of the input buffer is less than the minimum size that MinimumRequiredCb specifies.
E_OUTOFMEMORY	Not enough memory is available to retrieve the buffer. The driver should complete the request with an error status value.

This method might return one of the other values that Winerror.h contains.

Remarks

A request's input buffer contains information, such as data to be written to a disk, that the originator of the request supplied. Your driver can call RequestRetrieveInputBuffer to obtain the input buffer for a write request or a device I/O control request, but not for a read request (because read requests do not provide input data).

The RequestRetrieveInputBuffer method retrieves the input buffer for I/O requests that use the buffered I/O or direct I/O method for accessing data buffers.

If RequestRetrieveInputBuffer returns S_OK, the driver receives the address and, optionally, the size of the input buffer.

The driver can access the retrieved buffer until it completes the I/O request.

Instead of calling RequestRetrieveInputBuffer, the driver can call IWDFIoRequest2::RetrieveInputMemory, which creates a framework memory object that represents the buffer.

For more information about accessing an I/O request's data buffers, see Accessing Data Buffers in UMDF-Based Drivers.

Examples

The following code example shows a segment of a serial port driver's IQueueCallbackDeviceIoControl::OnDeviceIoControl callback function. From an I/O request's input buffer, the code segment obtains the baud rate that should be set for the device.

VOID
STDMETHODCALLTYPE
  CMyQueue::OnDeviceIoControl(
    __in IWDFIoQueue*  FxQueue,
    __in IWDFIoRequest*  FxRequest,
    __in ULONG  ControlCode,
    __in SIZE_T  InputBufferCb,
    __in SIZE_T  OutputBufferCb
    )
{
    PBYTE buffer;
    SIZE_T bufferSize;
    HRESULT hr;
    //
    // Declare an IWDFIoRequest2 interface pointer and obtain the
    // IWDFIoRequest2 interface from the IWDFIoRequest interface.
    //
    CComQIPtr<IWDFIoRequest2> r2 = FxRequest;

    switch (ControlCode)
    {
        case IOCTL_SERIAL_SET_BAUD_RATE: 
        {
            //
            // Obtain the baud rate from the write request's input buffer.
            //
            hr = r2->RetrieveInputBuffer(sizeof(SERIAL_BAUD_RATE),
                                         (PVOID*) &buffer, 
                                         &bufferSize);
...
        }
    }
}

Requirements

Requirement	Value
End of support	Unavailable in UMDF 2.0 and later.
Target Platform	Desktop
Minimum UMDF version	1.9
Header	wudfddi.h (include Wudfddi.h)
DLL	WUDFx.dll

Delen via