Bewerken

Delen via

IPowerPolicyCallbackWakeFromSx::OnArmWakeFromSx method (wudfddi.h)

  • Artikel

[Warning: UMDF 2 is the latest version of UMDF and supersedes UMDF 1. All new UMDF drivers should be written using UMDF 2. No new features are being added to UMDF 1 and there is limited support for UMDF 1 on newer versions of Windows 10. Universal Windows drivers must use UMDF 2. For more info, see Getting Started with UMDF.]

A driver's OnArmWakeFromSx event callback function arms (that is, enables) a device so that it can trigger a wake signal while in a low-power device state. The wake signal causes the device to enter its working state (D0) and the system to enter its working state (S0).

Syntax

HRESULT OnArmWakeFromSx(
  [in] IWDFDevice *pWdfDevice
);

Parameters

[in] pWdfDevice

A pointer to the IWDFDevice interface of the device object that represents one of the driver's devices.

Return value

If the operation is successful, the OnArmWakeFromSx callback function must return S_OK or another status value for which SUCCEEDED(status) equals TRUE. Otherwise it must return a status value for which SUCCEEDED(status) equals FALSE.

If SUCCEEDED(status) equals FALSE, the framework calls the driver's IPowerPolicyCallbackWakeFromSx::OnDisarmWakeFromSx callback function. (The framework does not report a device failure to the PnP manager.)

Remarks

Your driver must provide an OnArmWakeFromSx callback function if the driver supports the IPowerPolicyCallbackWakeFromSx interface.

This callback function handles device-specific operations that are needed to enable the device to detect an external event that triggers a wake signal on the bus. The kernel-mode bus driver handles bus-specific operations, such as enabling the PCI bus's Power Management Event (PME) signal.

If a driver has registered an OnArmWakeFromSx callback function, the framework calls it while the device is still in the D0 device power state, before the bus driver lowers the device's power state but after the framework has sent a wait/wake IRP on behalf of the driver.

The process occurs in the following sequence:

  1. The framework determines that the system is about to enter a low-power system state.
  2. The framework calls the driver's OnArmWakeFromSx callback function.
  3. The framework asks the driver for the device's bus to lower the device's power.
Immediately before a device enters a low-power state, the framework calls the driver's IPnpCallback::OnD0Exit callback function.

For more information about when the framework calls this callback function, see PnP and Power Management Scenarios in UMDF.

You do not need to provide an OnArmWakeFromSx callback function if your device does not require special hardware operations that enable the device to trigger a wake signal.

For more information about this callback function, see Supporting System Wake-Up in UMDF-based Drivers.

Requirements

Requirement Value
End of support Unavailable in UMDF 2.0 and later.
Target Platform Desktop
Minimum UMDF version 1.9
Header wudfddi.h (include Wudfddi.h)

See also

IPowerPolicyCallbackWakeFromSx

IPowerPolicyCallbackWakeFromSx::OnDisarmWakeFromSx

IPowerPolicyCallbackWakeFromSx::OnWakeFromSxTriggered