PFN_WSK_RECEIVE callback function (wsk.h)

Artikel
10/21/2021

The WskReceive function receives data over a connection-oriented or stream socket from a remote transport address.

Syntax

PFN_WSK_RECEIVE PfnWskReceive;

NTSTATUS PfnWskReceive(
  [in]      PWSK_SOCKET Socket,
  [in]      PWSK_BUF Buffer,
  [in]      ULONG Flags,
  [in, out] PIRP Irp
)
{...}

Parameters

[in] Socket

A pointer to a WSK_SOCKET structure that specifies the socket object for the socket from which to receive the data.

[in] Buffer

A pointer to an initialized WSK_BUF structure that describes the data buffer that receives the data from the socket.

[in] Flags

A ULONG value that contains a bitwise OR of a combination of the following flags:

WSK_FLAG_WAITALL

Wait until the data buffer is completely filled. If this flag is specified, the IRP specified in the Irp parameter will not be completed until one of the following events occurs:

The data buffer that is described by the WSK_BUF structure that is pointed to by the Buffer parameter is completely filled.
The connection is gracefully disconnected by the remote sender.
The connection is abortively disconnected by either the WSK application or by the remote sender.
The specified IRP is canceled.

This flag is supported by the Microsoft TCP/IP transport protocol. This flag might not be supported by other transport protocols.

WSK_FLAG_DRAIN

Wait until the socket is disconnected, discarding any data that is received on the socket. If this flag is specified, the specified IRP will not be completed until one of the following events occurs:

The connection is gracefully disconnected by the remote sender.
The connection is abortively disconnected by either the WSK application or by the remote sender.
The specified IRP is canceled.

Any received data is discarded by the WSK subsystem. No received data will be copied into the data buffer. The Buffer parameter is still required when this flag is specified, but the length of the buffer that is described by the WSK_BUF structure must be zero.

This flag is supported by the Microsoft TCP/IP transport protocol. This flag might not be supported by other transport protocols.

The WSK_FLAG_WAITALL and WSK_FLAG_DRAIN flags are mutually exclusive. A WSK application should not specify both of these flags at the same time.

[in, out] Irp

A pointer to a caller-allocated IRP that the WSK subsystem uses to complete the receive operation asynchronously. For more information about using IRPs with WSK functions, see Using IRPs with Winsock Kernel Functions.

Return value

WskReceive returns one of the following NTSTATUS codes:

Return code	Description
STATUS_SUCCESS	Data was successfully received from the socket. The IRP will be completed with success status. The IoStatus.Information field of the IRP contains the number of bytes that were received.
STATUS_PENDING	The WSK subsystem could not receive the data from the socket immediately. The WSK subsystem will complete the IRP after it has received the data from the socket. The status of the receive operation will be returned in the IoStatus.Status field of the IRP. If the operation succeeds, the IoStatus.Information field of the IRP will contain the number of bytes that were received.
STATUS_FILE_FORCED_CLOSED	The socket is no longer functional. The IRP will be completed with failure status. The WSK application must call the WskCloseSocket function to close the socket as soon as possible.
STATUS_NOT_SUPPORTED	A specified flag is not supported by the underlying network transport.
Other status codes	An error occurred. The IRP will be completed with failure status.

Remarks

A WSK application can call the WskReceive function only on a connection-oriented or stream socket that has been previously connected to a remote transport address. A connection-oriented socket is connected to a remote transport address by one of the following methods:

The WSK application connects the socket by calling the WskConnect function.
The WSK application creates, binds, and connects the socket by calling the WskSocketConnect function.
The WSK subsystem connects the socket when the WSK application accepts an incoming connection request on a listening socket.

If a WSK application's WskReceiveEvent event callback function is enabled on a connection-oriented socket and the application also has a pending call to the WskReceive function on the same connection-oriented socket, then, when data arrives, the pending call to the WskReceive function will take precedence over the WskReceiveEvent event callback function. The WSK subsystem calls the application's WskReceiveEvent event callback function only if there are no IRPs queued from pending calls to the WskReceive function. However, a WSK application should not assume that the WSK subsystem will not call the application's WskReceiveEvent event callback function for a connection-oriented socket that has a pending call to the WskReceive function. Race conditions exist where the WSK subsystem could still call the WSK application's WskReceiveEvent event callback function for the socket. The only way for a WSK application to ensure that the WSK subsystem will not call the application's WskReceiveEvent event callback function for a connection-oriented socket is to disable the application's WskReceiveEvent event callback function on the socket.

A WSK application can call the WskReceive function with a zero length specified in the Length member of the WSK_BUF structure that is pointed to by the Buffer parameter. Specifying a zero length in this member is useful in the following situations:

When re-enabling the WskReceiveEvent event callback function for a socket after the WskReceiveEvent event callback function previously returned STATUS_DATA_NOT_ACCEPTED
When specifying the WSK_FLAG_DRAIN flag to discard any additional data that is received on the socket

If the WskReceive function returns STATUS_PENDING, the MDL chain that is described in the WSK_BUF structure that is pointed to by the Buffer parameter must remain locked in memory until the IRP is completed.

Requirements

Requirement	Value
Minimum supported client	Available in Windows Vista and later versions of the Windows operating systems.
Target Platform	Universal
Header	wsk.h (include Wsk.h)
IRQL	<= DISPATCH_LEVEL

Delen via