IWiaMiniDrv::drvAcquireItemData method (wiamindr_lh.h)
The IWiaMiniDrv::drvAcquireItemData method is called by the WIA service to transfer data from the device to an application.
Syntax
HRESULT drvAcquireItemData(
BYTE *__MIDL__IWiaMiniDrv0009,
LONG __MIDL__IWiaMiniDrv0010,
PMINIDRV_TRANSFER_CONTEXT __MIDL__IWiaMiniDrv0011,
LONG *__MIDL__IWiaMiniDrv0012
);
Parameters
__MIDL__IWiaMiniDrv0009
lFlags [in]
Reserved.
__MIDL__IWiaMiniDrv0010
pWiasContext [in]
Pointer to a WIA item context.
__MIDL__IWiaMiniDrv0011
plDevErrVal [out]
Points to a memory location that will receive a status code for this method. If this method returns S_OK, the value stored will be zero. Otherwise, a minidriver-specific error code will be stored at the location pointed to by this parameter.
__MIDL__IWiaMiniDrv0012
pmdtc [in, out]
Points to a MINIDRV_TRANSFER_CONTEXT structure containing the device transfer context. The MINIDRV_TRANSFER_CONTEXT structure contains parameters that pertain to the data to be transferred.
Return value
On success, the method should return S_OK and clear the device error value pointed to by plDevErrVal. If the transfer was canceled, the method should return S_FALSE. If the method fails, it should return a standard COM error code and fill in a minidriver-specific error code value in the memory pointed to by plDevErrVal. The Remarks section has additional return-value information that applies to ADF scanning.
Remarks
There are two main types of transfer: memory-based, and file-based. The WIA service indicates which type is to be performed by the setting of pmdtc-->tymed, which will be TYMED_CALLBACK or TYMED_MULTIPAGE_CALLBACK for memory-based transfers, and TYMED_FILE or TYMED_MULTIPAGE_FILE for file transfers. For more information about these constants, see WIA_IPA_TYMED.
For memory-based transfers, a buffer may or may not have already been allocated, as indicated by the value in pmdtc-->bClassDrvAllocBuf. The WIA service can pass up to two buffers to the minidriver, but typically passes only one. The number of buffers is specified by the value in pmdtc-->lNumBuffers. If memory for the buffer is not already allocated, the minidriver should allocate it using any of the usual means, such as CoTaskMemAlloc, or new. If the minidriver allocates a buffer, it also has the responsibility of freeing the buffer.
For file transfers, the minidriver should first write the data to the buffer passed in the WIA service's call to this method, and then call wiasWritePageBufToFile to write the buffer data to the file involved. The minidriver should not attempt to use the file handle specified in pmdtc-->hFile to write the data to the file.
Periodically, the minidriver should call the IWiaMiniDrvCallBack::MiniDrvCallback method in the COM interface point to by pdmtc-->pIWiaMiniDrvCallBack to update the status of the transfer. For memory-based transfers, this function is used to pass the data back to the application. How often this function should be called is left to the minidriver, but it should be called about ten times, or roughly once per second during the transfer, whichever is more often.
Other transfer parameters that the WIA service provides include the following:
pmdtc-->guidFormatID - the data format
pmdtc-->lCompression - the type of compression used
A potential problem for ADF-equipped scanners is running out of paper during a scan operation. The HRESULT that your implementation of IWiaMiniDrv::drvAcquireItemData returns depends on the current setting of the scanner's WIA_DPS_PAGES property, and whether all pages were properly scanned. Use the following rules to guide you in determining the appropriate HRESULT to return in this method.
| Scenario | HRESULT value |
|---|---|
| The WIA_DPS_PAGES property was set to 0, and the scanner emptied its ADF with no errors. The WIA_DPS_PAGES property was set to N (where N > 0), and the scanner processed N pages with no errors. |
S_OK |
| The WIA_DPS_PAGES property was set to N, and the scanner processed at least one page but ran out of paper before processing all N pages. | WIA_STATUS_END_OF_MEDIA |
| The scanner has unexpectedly detected multiple page feed, stopped scanning, and has set the WIA_DPS_DOCUMENT_HANDLING_STATUS to MULTIPLE_FEED. | WIA_ERROR_MULTI_FEED |
| The scanner ran out of paper on the first scan, regardless of the setting of the WIA_DPS_PAGES property. A paper jam or other error occurred during the scan operation. |
Other error code |
Requirements
| Requirement | Value |
|---|---|
| Target Platform | Desktop |
| Header | wiamindr_lh.h (include Wiamindr.h) |