PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK callback function (wdm.h)

Artikel
02/28/2023

The DevicePowerNotRequiredCallback callback routine notifies the device driver that the device is not required to stay in the D0 power state.

Syntax

PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK PoFxDevicePowerNotRequiredCallback;

void PoFxDevicePowerNotRequiredCallback(
  [in] PVOID Context
)
{...}

Parameters

[in] Context

A pointer to the device context. The device driver uses this context to store information about the current power state of the device. The device driver specified this pointer in the DeviceContext member of the PO_FX_DEVICE structure that the driver used to register the device with the power management framework (PoFx). This context is opaque to PoFx.

Return value

None

Remarks

When PoFx calls the driver's DevicePowerNotRequiredCallback routine, the driver must first decide whether to initiate a transition to a low-power Dx state (by sending an IRP_MN_SET_POWER request down the device stack) or to remain in the D0 state. Next, without waiting for any Dx transition to complete, the driver must call the PoFxCompleteDevicePowerNotRequired routine to notify PoFx that the driver completed its response to the DevicePowerNotRequiredCallback callback. The driver can call PoFxCompleteDevicePowerNotRequired before or after the DevicePowerNotRequiredCallback routine returns.

When a device is in the D0 state, and the Fx state or active/idle condition of a component in the device changes, PoFx evaluates whether the device can enter a low-power Dx state or must remain in the D0 state. If the device can enter a low-power Dx state, PoFx calls the driver's DevicePowerNotRequiredCallback routine.

If the device enters a low-power Dx state in response to a DevicePowerNotRequiredCallback callback, but PoFx later determines that the device must enter the D0 state, PoFx calls the driver's DevicePowerRequiredCallback routine. In response to this call, the device must enter the D0 state.

Examples

To define a DevicePowerNotRequiredCallback callback routine, you must first provide a function declaration that identifies the type of callback routine you're defining. Windows provides a set of callback function types for drivers. Declaring a function using the callback function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a DevicePowerNotRequiredCallback callback routine that is named MyDevicePowerNotRequiredCallback, use the PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK type as shown in this code example:

PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK MyDevicePowerNotRequiredCallback;

Then, implement your callback routine as follows:

_Use_decl_annotations_
VOID
  MyDevicePowerNotRequiredCallback(
    PVOID Context
    )
  {
      // Function body
  }

The PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK function type is defined in the Wdm.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the _Use_decl_annotations_ annotation to your function definition. The _Use_decl_annotations_ annotation ensures that the annotations that are applied to the PO_FX_DEVICE_POWER_NOT_REQUIRED_CALLBACK function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for WDM Drivers. For information about _Use_decl_annotations_, see Annotating Function Behavior.

Requirements

Requirement	Value
Minimum supported client	Supported starting with Windows 8.
Target Platform	Desktop
Header	wdm.h (include Wudfwdm.h)
IRQL	Called at IRQL <= DISPATCH_LEVEL.

Delen via