PALLOCATE_COMMON_BUFFER_EX callback function (wdm.h)
The AllocateCommonBufferEx routine allocates memory for a common buffer and maps this memory so that it can be accessed both by the processor and by a device that performs DMA operations.
Syntax
PALLOCATE_COMMON_BUFFER_EX PallocateCommonBufferEx;
PVOID PallocateCommonBufferEx(
[in] PDMA_ADAPTER DmaAdapter,
[in, optional] PPHYSICAL_ADDRESS MaximumAddress,
[in] ULONG Length,
[out] PPHYSICAL_ADDRESS LogicalAddress,
[in] BOOLEAN CacheEnabled,
[in] NODE_REQUIREMENT PreferredNode
)
{...}
Parameters
[in] DmaAdapter
A pointer to a DMA_ADAPTER structure. This structure is the adapter object that represents the driver's bus-master DMA device or system DMA channel. The caller obtained this pointer from a previous call to the IoGetDmaAdapter routine.
[in, optional] MaximumAddress
A pointer to a variable that contains the maximum logical address for the common buffer. This parameter indicates that the buffer should be allocated from memory below this address. This parameter is optional and can be specified as NULL to indicate that there is no maximum address.
[in] Length
The size, in bytes, of the common buffer that is to be allocated for the DMA operation.
[out] LogicalAddress
A pointer to a variable into which this routine writes the logical address that the device can use to access the common buffer. The DMA device should use this logical address instead of the physical address that is returned by a routine such as MmGetPhysicalAddress.
[in] CacheEnabled
Whether the routine must enable or disable cached memory in the common buffer that is to be allocated. If TRUE, caching is enabled. If FALSE, it is disabled. If the hardware platform does not enforce cache coherency for DMA operations, then pass FALSE. For information about this parameter on ARM or ARM 64-based processors target computers, see Remarks.
[in] PreferredNode
The preferred NUMA node from which the memory is to be allocated. If N is the number of NUMA nodes in a multiprocessor system, PreferredNode is a number in the range 0 to N–1. For a one-processor system or a non-NUMA multiprocessor system, set PreferredNode to zero.
Return value
AllocateCommonBufferEx returns the virtual address of the memory allocated for the common buffer. If the buffer cannot be allocated, NULL is returned.
Remarks
AllocateCommonBufferEx is not a system routine that can be called directly by name. This routine can be called only by pointer from the address returned in a DMA_OPERATIONS structure. Drivers obtain the address of this routine by calling IoGetDmaAdapter with the Version member of the DeviceDescription parameter set to DEVICE_DESCRIPTION_VERSION3. If IoGetDmaAdapter returns NULL, the routine is not available on your platform.
AllocateCommonBufferEx is an extended version of the AllocateCommonBuffer routine. The following list summarizes the features that are available only in the extended version:
The caller can specify a maximum logical address for the common buffer that is to be allocated.
The caller can specify a preferred NUMA node in which the common buffer is to be allocated.
On computers with ARM or ARM 64-based processors, cache settings in the system ACPI have a higher precedence than the CacheEnabled parameter value passed by the driver. If the ACPI _CCA method indicates that the device is not cache coherent, the operating system disables caching even if the driver allocates cached memory with CacheEnabled set to TRUE.
On computers with ARM or ARM 64-based processors, the operating system allocates an uncached common buffer as Device Memory. For more information about the buffer, see sections A3.5.1, and A3.5.6 from the ARMv7 Architecture Reference Manual.
The processor does not permit misaligned access to Device Memory. Your driver must always access data from the common buffer by using naturally-aligned operations. Most kernel routines do not accept Device Memory as input parameters. For example, a network driver cannot pass Device Memory into NdisMIndicateReceiveNetBufferLists. If your driver needs to pass data from a DMA common buffer to a kernel routine, either allocate the buffer with CacheEnabled set to TRUE or copy the data from the uncached common buffer into a temporary pool allocation.
For more information about DMA operations that use a common buffer, see the following topics:
Using Common-Buffer Bus-Master DMA
Using Common-Buffer System DMA
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Available starting with Windows 8. |
| Target Platform | Desktop |
| Header | wdm.h (include Wdm.h, Ntddk.h, Ntifs.h) |
| IRQL | PASSIVE_LEVEL |