Bewerken

Delen via

UFS_CONFIG_DESCRIPTOR_V3_1 structure (ufs.h)

  • Artikel

Syntax

typedef struct {
  UCHAR                           bLength;
  UCHAR                           bDescriptorIDN;
  UCHAR                           bConfDescContinue;
  UCHAR                           bBootEnable;
  UCHAR                           bDescrAccessEn;
  UCHAR                           bInitPowerMode;
  UCHAR                           bHighPriorityLUN;
  UCHAR                           bSecureRemovalType;
  UCHAR                           bInitActiveICCLevel;
  UCHAR                           wPeriodicRTCUpdate[2];
  UCHAR                           Reserved2[1];
  UCHAR                           bRPMBRegionEnable;
  UCHAR                           bRPMBRegion1Size;
  UCHAR                           bRPMBRegion2Size;
  UCHAR                           bRPMBRegion3Size;
  UCHAR                           bWriteBoosterBufferPreserveUserSpaceEn;
  UCHAR                           bWriteBoosterBufferType;
  ULONG                           dNumSharedWriteBoosterBufferAllocUnits;
  UFS_UNIT_CONFIG_DESCRIPTOR_V3_1 UnitConfig[UFS_MAX_NUM_LU];
} UFS_CONFIG_DESCRIPTOR_V3_1, *PUFS_CONFIG_DESCRIPTOR_V3_1;

Members

bLength

Specifies the size, in bytes, of this descriptor.

bDescriptorIDN

Specifies the configuration descriptor type identifier. This descriptor will have a value of UFS_DESC_CONFIGURATION_IDN.

bConfDescContinue

Specifies if a device's configuration descriptor continue feature is enabled.

bBootEnable

Specifies if a device's boot feature is enabled.

bDescrAccessEn

Enables access to the device descriptor after the partial initialization phase of the boot sequence.

bInitPowerMode

Specifies the power mode after device initialization or hardware reset.

bHighPriorityLUN

bHighPriorityLUN configures the high priority logical unit.

bSecureRemovalType

Configures the secure removal type.

bInitActiveICCLevel

Configures the ICC level in Active mode after device initialization or hardware reset.

wPeriodicRTCUpdate[2]

Specifies the frequency and method of real-time clock updates.

Reserved2[1]

Reserved for future use.

bRPMBRegionEnable

Specifies if Replay Protected Memory Blocks (RPMB) are enabled.

bRPMBRegion1Size

Specifies the size of RPMB region 1.

bRPMBRegion2Size

Specifies the size of RPMB region 2.

bRPMBRegion3Size

Specifies the size of RPMB region 3.

bWriteBoosterBufferPreserveUserSpaceEn

Setting bWriteBoosterBufferPreserveUserSpaceEn to 0x01 avoids the reduction of the total user space that can be configured during provisioning, but might result in lower performance. If bWriteBoosterBufferPreserveUserSpaceEn is set to 0x00, the write booster buffer reduces the total user space that can be configured during provisioning.

bWriteBoosterBufferType

bWriteBoosterBufferType configures the the write booster buffer type. A value of 0x00 specifies logical unit dedicated buffer mode. A value of 0x01 specifies shared buffer mode.

dNumSharedWriteBoosterBufferAllocUnits

dNumSharedWriteBoosterBufferAllocUnits specifies the write booster buffer size for a shared write booster buffer configuration.

UnitConfig[UFS_MAX_NUM_LU]

Contains the configurable parameters of the unit descriptor.

Remarks

If bBootEnable is set to zero or if the Boot Well Known Logical Unit is not mapped to an enabled logical unit, then the Boot Well Known Logical Unit shall terminate.

UFS_DEVICE_DESCRIPTOR is read only, some of its parameters may be changed by changing the corresponding parameter in UFS_UNIT_CONFIG_DESCRIPTOR_V3_1.

Requirements

Requirement Value
Header ufs.h

See also