Bewerken

Delen via

UFS_ATTRIBUTES_DESCRIPTOR enumeration (ufs.h)

  • Artikel

UFS_ATTRIBUTES_DESCRIPTOR describes the different types of attributes used by Universal Flash Storage (UFS) descriptors.

Syntax

typedef enum {
  UFS_bBootLunEn,
  UFS_Reserved_01,
  UFS_bCurrentPowerMode,
  UFS_bActiveICCLevel,
  UFS_bOutOfOrderDataEn,
  UFS_bBackgroundOpStatus,
  UFS_bPurgeStatus,
  UFS_bMaxDataInSize,
  UFS_bMaxDataOutSize,
  UFS_dDynCapNeeded,
  UFS_bRefClkFreq,
  UFS_bConfigDescrLock,
  UFS_bMaxNumOfRTT,
  UFS_wExceptionEventControl,
  UFS_wExceptionEventStatus,
  UFS_dSecondsPassed,
  UFS_wContextConf,
  UFS_Obsolete,
  UFS_Reserved_12,
  UFS_Reserved_13,
  UFS_bDeviceFFUStatus,
  UFS_bPSAState,
  UFS_dPSADataSize,
  UFS_bRefClkGatingWaitTime,
  UFS_bDeviceCaseRoughTemperature,
  UFS_bDeviceTooHighTempBoundary,
  UFS_bDeviceTooLowTempBoundary,
  UFS_bThrottlingStatus,
  UFS_bWriteBoosterBufferFlushStatus,
  UFS_bAvailableWriteBoosterBufferSize,
  UFS_bWriteBoosterBufferLifeTimeEst,
  UFS_dCurrentWriteBoosterBufferSize,
  UFS_Reserved_20,
  UFS_Reserved_21,
  UFS_Reserved_22,
  UFS_Reserved_23,
  UFS_Reserved_24,
  UFS_Reserved_25,
  UFS_Reserved_26,
  UFS_Reserved_27,
  UFS_Reserved_28,
  UFS_Reserved_29,
  UFS_Reserved_2A,
  UFS_Reserved_2B,
  UFS_bRefreshStatus,
  UFS_bRefreshFreq,
  UFS_bRefreshUnit,
  UFS_bRefreshMethod
} UFS_ATTRIBUTES_DESCRIPTOR;

Constants

 
UFS_bBootLunEn
Indicates if the Boot Logical Unit Number(LUN) is enabled.
UFS_Reserved_01
Reserved for future use.
UFS_bCurrentPowerMode
Indicates the current power mode. See Remarks for possible values.
UFS_bActiveICCLevel
Specifies the maximum current consumption allowed during Active Mode. Value ranges from 0x00 to 0x0F.
UFS_bOutOfOrderDataEn
Specifies if out-of-order data transfer is enabled.
UFS_bBackgroundOpStatus
Specifies if the device has a need for background operations. See Remarks for possible values.
UFS_bPurgeStatus
Specifies the current purge operation's status.
UFS_bMaxDataInSize
Specifies the maximum data size in a DATA IN UFS Protocol Information Units (UPIU). This parameter can be written by the host only when all logical unit task queues are empty.
UFS_bMaxDataOutSize
Specifies the maximum data-out size. This parameter can be written by the host only when all logical unit task queues are empty.
UFS_dDynCapNeeded
Specifies the dynamic capacity need.
UFS_bRefClkFreq
Specifies the reference clock frequency value. See Remarks for possible values.
UFS_bConfigDescrLock
Specifies if the configuration descriptor is locked.
UFS_bMaxNumOfRTT
Defines the current maximum number of outstanding READY TO TRANSFER UPIU's (RTT's) that are allowed. This value can be set by the host.
UFS_wExceptionEventControl
Specifies the Exception Event Controller. UFS_wExceptionEventControl enables the setting of the EVENT_ALERT bit in the Device Information field, which is contained in the RESPONSE UPIU.
UFS_wExceptionEventStatus
Specifies a bitmap of each exception event status.A bit will be set only if the relevant event has occurred (regardless of the UFS_wExceptionEventControl status). See Remarks for possible values.
UFS_dSecondsPassed
Specifies the time passed in seconds.
UFS_wContextConf
Specifies the context attribute.
UFS_Obsolete
Obsolete
UFS_Reserved_12
Reserved for future use.
UFS_Reserved_13
Reserved for future use.
UFS_bDeviceFFUStatus
Specifies the Device Field Firmware Update (FFU) status. See Remarks for possible values.
UFS_bPSAState
Specifies the current Product State Awareness (PSA) State. See Remarks for possible values.
UFS_dPSADataSize
Specifies the amount of data that the host plans to load to all logical units with bPSASensitive set to 1.
UFS_bRefClkGatingWaitTime
Specifies the reference clock gating wait time.
UFS_bDeviceCaseRoughTemperature
Specifies the rough temperature of the device case.
UFS_bDeviceTooHighTempBoundary
Specifies the upper boundary for the device temperature.
UFS_bDeviceTooLowTempBoundary
Specifies the lower boundary for the device temperature.
UFS_bThrottlingStatus
Specifies the throttling status.
UFS_bWriteBoosterBufferFlushStatus
Specifies the write booster buffer flush status.
UFS_bAvailableWriteBoosterBufferSize
Specifies the available write booster buffer size.
UFS_bWriteBoosterBufferLifeTimeEst
Specifies the write booster buffer lifetime estimate.
UFS_dCurrentWriteBoosterBufferSize
Specifies the current write booster buffer size.
UFS_Reserved_20
Reserved for future use.
UFS_Reserved_21
Reserved for future use.
UFS_Reserved_22
Reserved for future use.
UFS_Reserved_23
Reserved for future use.
UFS_Reserved_24
Reserved for future use.
UFS_Reserved_25
Reserved for future use.
UFS_Reserved_26
Reserved for future use.
UFS_Reserved_27
Reserved for future use.
UFS_Reserved_28
Reserved for future use.
UFS_Reserved_29
Reserved for future use.
UFS_Reserved_2A
Reserved for future use.
UFS_Reserved_2B
Reserved for future use.
UFS_bRefreshStatus
Specifies the refresh status.
UFS_bRefreshFreq
Specifies the refresh frequency.
UFS_bRefreshUnit
Specifies the refresh units.
UFS_bRefreshMethod
Specifies the refresh method.

Remarks

UFS_bCurrentPowerMode is the only attribute the device is required to return in any power mode. If the device is not in Active power mode or Idle power mode, a QUERY REQUEST UPIU to access descriptors, flags, or attributes other than bCurrentPowerMode may fail.

Tje UFS_bDeviceFFUStatus value is kept after power cycle, hardware reset or any other type of reset. This attribute may change value when a microcode activation event occurs.

UFS_bMaxDataInSize is equal to bMaxInBufferSize when a UFS device is shipped.

Possible values for some fields

UFS_bCurrentPowerMode contains one of the following values:

Value Description
0x00 Idle power mode.
0x10 Pre-Active power mode.
0x11 Active power mode.
0x20 Pre-Sleep power mode.
0x22 Universal Flash Storage (UFS)-Sleep power mode.
0x30 40% to 50% of the device's estimated life time has been used.
0x33 50% to 60% of the device's estimated life time has been used.
All other values Reserved for future use.

UFS_bBackgroundOpStatus contains one of the following values:

Value Description
0x00 Device requires no background operations.
0x01 Device has a non-critical need of background operations.
0x02 Device has a performance impacted-based need of background operations.
0x03 Device has a critical need of background operations.

UFS_bRefClkFreq contains one of the following values:

Value Description
0x00 19.2 MHz
0x01 26 MHz
0x02 38.4 MHz
0x03 52 MHz

UFS_wExceptionEventStatus contains the following bits:

Bit Value
0 DYNCAP_NEEDED
1 SYSPOOL_EXHAUSTED
2 URGENT_BKOPS
3 to 15 Reserved.

UFS_bDeviceFFUStatus contains one of the following values:

Value Description
0x00 No information on the FFU status.
0x01 Successful microcode update.
0x02 Microcode corruption error.
0x03 Internal error.
0x04 Microcode version mismatch.
0x05 to 0xFE Reserved.
0xFF General Error.

UFS_bPSAState contains one of the following values:

Value State Description
0x00 Off PSA feature is off.
0x01 Pre-solder PSA feature is on and the device is in a pre-soldering state.
0x02 Loading Complete The PSA feature is on. The host will set to this value after the host finished writing data during pre-soldering state.
0x03 Soldered PSA feature is no longer available. Set by the Device to indicate it is in a post-soldering state. This attribute is locked after it is in 'Soldered' state.

Requirements

Requirement Value
Minimum supported client Windows 10, version 1709
Minimum supported server Windows Server 2016
Header ufs.h

See also

UFS_CONFIG_DESCRIPTOR UFS_DEVICE_DESCRIPTOR UFS_DEVICE_HEALTH_DESCRIPTOR UFS_GEOMETRY_DESCRIPTOR UFS_INTERCONNECT_DESCRIPTOR UFS_POWER_DESCRIPTOR UFS_RPMB_UNIT_DESCRIPTOR UFS_STRING_DESCRIPTOR UFS_UNIT_CONFIG_DESCRIPTOR UFS_UNIT_DESCRIPTOR