Bewerken

Delen via

STOR_POFX_DEVICE structure (storport.h)

  • Artikel

The STOR_POFX_DEVICE structure describes the power attributes of a storage device to the power management framework (PoFx).

Syntax

typedef struct _STOR_POFX_DEVICE {
  ULONG               Version;
  ULONG               Size;
  ULONG               ComponentCount;
  ULONG               Flags;
  STOR_POFX_COMPONENT Components[ANYSIZE_ARRAY];
} STOR_POFX_DEVICE, *PSTOR_POFX_DEVICE;

Members

Version

The version number of this structure. Set this member to STOR_POFX_DEVICE_VERSION_V1.

Size

The size of this structure. Set this value to STOR_POFX_DEVICE_SIZE.

ComponentCount

The number of elements in the Components array. Set this member to 1. Currently, only a single component is supported for either a storage adapter or logical unit.

Flags

The device power state capabilities flags. The miniport sets one or more of the PoFx device flags to enable or disable power state capabilities.

Flags is a bitwise OR combination of the following.

Value Meaning
STOR_POFX_DEVICE_FLAG_DISABLE_INTERRUPTS_ON_D3
 Specifies that, when set, Storport will disable interrupts when putting the Adapter to D3 and will reactivate interrupts when resuming to D0.
STOR_POFX_DEVICE_FLAG_ENABLE_D3_COLD
 Enables Storport to set the D3 Cold state for the adapter if it supports it. This flag applies to adapters only.
STOR_POFX_DEVICE_FLAG_NO_D0
 Requests that a power up IRP not be sent to the device object for the adapter or unit.
STOR_POFX_DEVICE_FLAG_NO_D3
 Requests that a power down IRP not be sent to the device object for the adapter or unit.
STOR_POFX_DEVICE_FLAG_NO_DUMP_ACTIVE
 The miniport is not able to bring the storage device active in dump mode if the device has entered the idle state or the power off when idle state. This flag indicates whether a device is available for dump when it is idle.

Components[ANYSIZE_ARRAY]

This member is the first element in an array of one or more STOR_POFX_COMPONENT elements. If the array contains more than one element, the additional elements immediately follow the STOR_POFX_DEVICE structure. The array contains one element for each component in the device. Currently, storage devices have only one component so additional component structures are unnecessary.

Remarks

To register a storage adapter for Storport PoFx support, the miniport driver calls StorPortEnablePassiveInitialization in its HwStorInitialize routine and implements a HwStorPassiveInitializeRoutine. The miniport calls StorPortInitializePoFxPower within it's HwStorPassiveInitializeRoutine to provide information about the adapter component.

To register a storage unit for Storport PoFx support, the miniport driver implements the HwStorUnitControl callback routine and provides handling of the ScsiUnitPoFxPowerInfo unit control code. When the handling the ScsiUnitPoFxPowerInfo control code, the miniport calls StorPortInitializePoFxPower if idle power management for the unit component is enabled.

The component for the storage device identified by its Components array index. Storage devices have only one component so the index of 0 is used. Routines such as StorPortPoFxActivateComponent and StorPortPoFxIdleComponent use the array index of a component to identify the component.

Requirements

Requirement Value
Minimum supported client Supported starting with Windows 8.
Header storport.h

See also

STOR_POFX_COMPONENT

StorPortInitializePoFxPower

StorPortPoFxActivateComponent

StorPortPoFxIdleComponent