StorPortLogError function (storport.h)
The StorPortLogError routine notifies the port driver that an error occurred.
Syntax
STORPORT_API VOID StorPortLogError(
[in] PVOID HwDeviceExtension,
[in, optional] PSCSI_REQUEST_BLOCK Srb,
[in] UCHAR PathId,
[in] UCHAR TargetId,
[in] UCHAR Lun,
[in] ULONG ErrorCode,
[in] ULONG UniqueId
);
Parameters
[in] HwDeviceExtension
A pointer to the hardware device extension. This is a per HBA storage area that the port driver allocates and initializes on behalf of the miniport driver. Miniport drivers usually store HBA-specific information in this extension, such as the state of the HBA and the mapped access ranges for the HBA. This area is available to the miniport immediately after the miniport driver calls StorPortInitialize. The port driver frees this memory when it removes the device.
[in, optional] Srb
Pointer to a SCSI request block if one is associated with the error. Otherwise, this parameter is NULL.
[in] PathId
Identifies the SCSI bus.
[in] TargetId
Identifies the target controller or device on the bus.
[in] Lun
Identifies the logical unit number of the target device.
[in] ErrorCode
Specifies an error code indicating one of the following values as the type of error.
| Value | Meaning |
|---|---|
| SP_BAD_FW_ERROR | Indicates the driver has detected bad or old firmware. The device will not be used. |
| SP_BAD_FW_WARNING | Indicates the driver has detected a card with old or bad firmware, which can result in reduced performance or functionality. |
| SP_BUS_PARITY_ERROR | Indicates a SCSI bus parity error was detected. |
| SP_BUS_TIME_OUT | Indicates a SCSI bus connection to a logical unit timed out. |
| SP_INTERNAL_ADAPTER_ERROR | Indicates an internal HBA error was detected. |
| SP_INVALID_RESELECTION | Indicates a logical unit reselected unexpectedly or with an invalid queue tag. |
| SP_IRQ_NOT_RESPONDING | Indicates the HBA is not interrupting when expected. |
| SP_PROTOCOL_ERROR | Indicates the miniport driver detected a SCSI bus protocol error. |
| SP_REQUEST_TIMEOUT | Indicates an operation to the controller has timed out. |
| SP_UNEXPECTED_DISCONNECT | Indicates that a target disconnected unexpectedly. |
[in] UniqueId
Specifies a unique identifier for the error. This value differentiates the current error from other errors with the same ErrorCode value. For some miniport drivers, this identifies the line of code where the error was detected. For others, it is additional information returned by the HBA.
Return value
None
Remarks
The port driver will log an error to the system event log.
Starting in Windows 8, the Srb parameter may point to either SCSI_REQUEST_BLOCK or STORAGE_REQUEST_BLOCK. If the function identifier in the Function field of Srb is SRB_FUNCTION_STORAGE_REQUEST_BLOCK, the SRB is a STORAGE_REQUEST_BLOCK request structure.
Requirements
| Requirement | Value |
|---|---|
| Target Platform | Universal |
| Header | storport.h (include Storport.h) |
| Library | Storport.lib |
| DDI compliance rules | StorPortDeprecated(storport) |