DEVICE_MANAGE_DATA_SET_ATTRIBUTES structure (ntddstor.h)
The DEVICE_DSM_INPUT (or DEVICE_MANAGE_DATA_SET_ATTRIBUTES) structure specifies a management action for the data-set attributes for a device.
Syntax
typedef struct _DEVICE_MANAGE_DATA_SET_ATTRIBUTES {
ULONG Size;
DEVICE_DSM_ACTION Action;
ULONG Flags;
ULONG ParameterBlockOffset;
ULONG ParameterBlockLength;
ULONG DataSetRangesOffset;
ULONG DataSetRangesLength;
} DEVICE_MANAGE_DATA_SET_ATTRIBUTES, *PDEVICE_MANAGE_DATA_SET_ATTRIBUTES, DEVICE_DSM_INPUT, *PDEVICE_DSM_INPUT;
Members
Size
Size of the DEVICE_DSM_INPUT structure, in bytes. The value of this member will change as members are added to the structure.
Action
A DEVICE_DSM_ACTION value that specifies the action to be performed. See DEVICE_DSM_ACTION Descriptions for a list of action values and descriptions.
If the DeviceDsmActionFlag_NonDestructive flag (most significant bit) is set in Action, the specified action is nondestructive. For nondestructive actions, the driver can safely forward the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request to the next lower driver in the stack even if the driver does not handle the specified action. If the driver does handle the DSM, it should perform the normal processing of the data set ranges block that is specified by the DataSetRangesOffset and DataSetRangesLength members before forwarding the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request to the next lower driver.
Flags
These flags are global to all control actions. This member can be set to one of the following flags:
| Flag Value | Meaning |
|---|---|
| DEVICE_DSM_FLAG_ENTIRE_DATA_SET_RANGE | The control action is specified for the entire block of data set ranges. If this flag is set, the DataSetRangesOffset and DataSetRangesLength members must be set to zero. |
ParameterBlockOffset
Specifies the start of the parameter block within the payload of the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request. The format of the parameter block depends on the value of the Action member. For more information regarding parameter block format, see DEVICE_DSM_ACTION Descriptions. Note: The offset of the parameter block must be aligned on the address boundary of the corresponding parameter.
If ParameterBlockOffset is set to zero, then the parameter block does not exist.
ParameterBlockLength
Specifies the length, in bytes, of the parameter block within the payload of the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request.
If ParameterBlockLength is set to zero, then the parameter block does not exist.
DataSetRangesOffset
Specifies the start of the block of data set ranges within the payload of the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request. This block consists of one or more contiguous entries that are formatted as DEVICE_DSM_RANGE structures. Note: The offset of the data set range block must be aligned on the address boundary of the DEVICE_DSM_RANGE structure.
If set to zero, then the block of data set ranges does not exist.
DataSetRangesLength
Specifies the length, in bytes, of the block of data set ranges within the payload of the IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request. If DataSetRangesLength is set to zero, the block of data set ranges does not exist.
Remarks
For more information on the format of the payload for an IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES request, see Data Set Management Overview. The total size of the buffer should be at least sizeof(DEVICE_DSM_INPUT) + ParameterBlockLength + DataSetRangesLength.
The block of data set ranges is specified by the DataSetRangesOffset and DataSetRangesLength members. If this block exists, it contains contiguous DEVICE_DSM_RANGE structures.
Requirements
| Requirement | Value |
|---|---|
| Header | ntddstor.h (include Ntddstor.h) |