Bewerken

Delen via

IOCTL_STORAGE_CHECK_VERIFY IOCTL (ntddstor.h)

  • Artikel

Determines whether the media has changed on a removable-media device that the caller has opened for read or write access. If read or write access to the device is not necessary, the caller can improve performance by opening the device with FILE_READ_ATTRIBUTES and issuing anIOCTL_STORAGE_CHECK_VERIFY2 request instead.

For more information, see Supporting Removable Media.

Major code

IRP_MJ_DEVICE_CONTROL

Input buffer

None.

Input buffer length

None.

Output buffer

Optionally, for disk and CD-ROM devices, Irp->AssociatedIrp.SystemBuffer points to a buffer to receive the media change count. The driver fills this buffer only if Parameters.DeviceIoControl.OutputBufferLength was nonzero and the return value is STATUS_SUCCESS. The media change count is a ULONG indicating how many times the media has changed since the driver started.

Otherwise, this request has no output.

Output buffer length

Optionally, for disk and CD-ROM devices, Parameters.DeviceIoControl.OutputBufferLength in the I/O stack location of the IRP indicates the size, in bytes, of a buffer, which must be >= sizeof(ULONG). This field is zero if the optional buffer is not specified.

Otherwise, this request has no input.

Status block

If a disk or CD-ROM driver has no indication that the media has changed, the driver sets the Status field to STATUS_SUCCESS. In addition, if the optional media change buffer was specified, the driver returns the media change count in the buffer at Irp->AssociatedIrp.SystemBuffer and sets the Information field to sizeof(ULONG). If the optional media change buffer was not specified, the driver sets Information to zero.

If the driver detects that the media has changed and the volume is mounted (VPB_MOUNTED is set in the VPB), it must:

  1. Set Information to zero.
  2. Set Status to STATUS_VERIFY_REQUIRED.
  3. Set the DO_VERIFY_VOLUME flag in the DeviceObject.
  4. Call IoCompleteRequest with the input IRP.
If the driver detects that the media has changed, but the volume is not mounted, the driver must not set the DO_VERIFY_VOLUME bit. Instead, it should do the following:
  1. Set Status to STATUS_IO_DEVICE_ERROR.
  2. Set Information to zero.
  3. Call IoCompleteRequest with the IRP.
If the driver detects an error such as STATUS_BUFFER_TOO_SMALL, STATUS_INSUFFICIENT_RESOURCES, or a device error, it sets Information to zero and sets the appropriate error value in the Status field.

For a tape driver, the Information field is set to zero and the Status field is set to STATUS_SUCCESS, or possibly to STATUS_VERIFY_REQUIRED.

Requirements

Requirement Value
Header ntddstor.h (include Ntddstor.h)

See also

IOCTL_STORAGE_CHECK_VERIFY2