SCSI_PASS_THROUGH_DIRECT_EX structure (ntddscsi.h)
The SCSI_PASS_THROUGH_DIRECT_EX structure is used in conjunction with an IOCTL_SCSI_PASS_THROUGH_DIRECT_EX request to instruct the port driver to send an embedded SCSI command to the target device. SCSI_PASS_THROUGH_DIRECT_EX can contain a bi-directional data transfers and a variable length command data block.
Note
The SCSI port driver and SCSI miniport driver models may be altered or unavailable in the future. Instead, we recommend using the Storport driver and Storport miniport driver models.
Syntax
typedef struct _SCSI_PASS_THROUGH_DIRECT_EX {
ULONG Version;
ULONG Length;
ULONG CdbLength;
ULONG StorAddressLength;
UCHAR ScsiStatus;
UCHAR SenseInfoLength;
UCHAR DataDirection;
UCHAR Reserved;
ULONG TimeOutValue;
ULONG StorAddressOffset;
ULONG SenseInfoOffset;
ULONG DataOutTransferLength;
ULONG DataInTransferLength;
VOID *DataOutBuffer;
VOID *DataInBuffer;
UCHAR Cdb[ANYSIZE_ARRAY];
} SCSI_PASS_THROUGH_DIRECT_EX, *PSCSI_PASS_THROUGH_DIRECT_EX;
Members
Version
The version of this structure. Set to 0.
Length
The size of this structure. Set to sizeof(SCSI_PASS_THROUGH_DIRECT_EX).
CdbLength
Indicates the size in bytes of the SCSI command descriptor block in Cdb.
StorAddressLength
The length of the storage device address structure at the offset of StorAddressOffset after this structure. This is set to sizeof(STOR_ADDR_BTL8).
ScsiStatus
Reports the SCSI status that was returned by the HBA or the target device.
SenseInfoLength
Indicates the size in bytes of the request-sense buffer. This member is optional and can be set to 0.
DataDirection
This field must have one of these values:
| Data Transfer Type | Meaning |
|---|---|
| SCSI_IOCTL_DATA_IN | Read data from the device. |
| SCSI_IOCTL_DATA_OUT | Write data to the device. |
| SCSI_IOCTL_DATA_UNSPECIFIED | No data is transferred. |
| SCSI_IOCTL_DATA_BIDIRECTIONAL | Data is valid for both input and output. |
Reserved
Reserved. Set to 0.
TimeOutValue
Indicates the interval in seconds that the request can execute before the port driver considers it timed out.
StorAddressOffset
The location of the target device's STOR_ADDR_BTL8 address structure, in bytes, from the beginning of this structure.
SenseInfoOffset
Offset from the beginning of this structure to the request-sense buffer. Set to 0 if no request-sense buffer is present.
DataOutTransferLength
Indicates the size in bytes of the output data buffer. Many devices transfer chunks of data of predefined length. The value in DataOutTransferLength must be an integral multiple of this predefined, minimum length that is specified by the device. If an underrun occurs, the miniport driver must update this member to the number of bytes actually transferred. If no output data buffer is present, this member is set to 0.
DataInTransferLength
Indicates the size in bytes of the input data buffer. Many devices transfer chunks of data of predefined length. The value in DataInTransferLength must be an integral multiple of this predefined, minimum length that is specified by the device. If an underrun occurs, the miniport driver must update this member to the number of bytes actually transferred. If no input data buffer is present, this member is set to 0.
DataOutBuffer
A pointer to an output data buffer.
DataInBuffer
A pointer to an input data buffer.
Cdb[ANYSIZE_ARRAY]
Specifies the SCSI command descriptor block to be sent to the target device.
Remarks
The SCSI_PASS_THROUGH_DIRECT_EX structure is used with IOCTL_SCSI_PASS_THROUGH_DIRECT_EX. With this request, the system locks down the buffer in user memory and the device accesses this memory directly. For a double-buffered equivalent of this device control request see IOCTL_SCSI_PASS_THROUGH_EX and SCSI_PASS_THROUGH_EX.
Note
Drivers executing on a 64 bit version of Windows must use the SCSI_PASS_THROUGH_DIRECT32_EX structure as the request data type when handling an IOCTL_SCSI_PASS_THROUGH_DIRECT_EX request from a 32 bit process.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Available starting with Windows 8. |
| Header | ntddscsi.h (include Ntddscsi.h) |
See also
IOCTL_SCSI_PASS_THROUGH_DIRECT_EX