NDIS_WWAN_SAR_CONFIG_INFO structure (ndiswwan.h)
The NDIS_WWAN_SAR_CONFIG_INFO structure describes a modem's current Specific Absorption Rate (SAR) configuration information.
Syntax
typedef struct _NDIS_WWAN_SAR_CONFIG_INFO {
NDIS_OBJECT_HEADER Header;
WWAN_STATUS uStatus;
WWAN_SAR_CONFIG_INFO SarConfig;
} NDIS_WWAN_SAR_CONFIG_INFO, *PNDIS_WWAN_SAR_CONFIG_INFO;
Members
Header
The header with type, revision, and size information about the NDIS_WWAN_SAR_CONFIG_INFO structure. The MB Service sets the header with the values that are shown in the following table when it sends the data structure to the miniport driver for set operations. Miniport drivers must set the header with the same values when they send the data structure to the MB service.
| Header submember | Value |
|---|---|
| Type | NDIS_OBJECT_TYPE_DEFAULT |
| Revision | NDIS_WWAN_SAR_CONFIG_INFO_REVISION_1 |
| Size | sizeof(NDIS_WWAN_SAR_CONFIG_INFO) |
For more information about these members, see NDIS_OBJECT_HEADER.
uStatus
The status of system capability. The following table shows the possible values for this member.
| Value | Meaning |
|---|---|
| WWAN_STATUS_SUCCESS | The operation succeeded. |
| WWAN_STATUS_BUSY | The operation failed because the device was busy. In the absence of any explicit information from the function to clear this condition, the host can use subsequent actions by the function (e.g. notifications or command completions) as a hint to retry the failed operation. |
| WWAN_STATUS_FAILURE | The operation failed. |
| WWAN_STATUS_NO_DEVICE_SUPPORT | The operation failed because the device does not support this OID. |
SarConfig
A formatted WWAN_SAR_CONFIG_INFO structure that describes the current SAR configuration information.
Remarks
This structure is used in the NDIS_STATUS_WWAN_SAR_CONFIG status notification in response to a previous OID_WWAN_SAR_CONFIG Query or Set request.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 10, version 1703 |
| Header | ndiswwan.h |