PROTOCOL_OPEN_ADAPTER_COMPLETE_EX callback function (ndis.h)

Artikel
10/21/2021

NDIS calls a protocol driver's ProtocolOpenAdapterCompleteEx function to complete an open adapter operation for which the NdisOpenAdapterEx function returned NDIS_STATUS_PENDING.

Note You must declare the function by using the PROTOCOL_OPEN_ADAPTER_COMPLETE_EX type. For more information, see the following Examples section.

Syntax

PROTOCOL_OPEN_ADAPTER_COMPLETE_EX ProtocolOpenAdapterCompleteEx;

void ProtocolOpenAdapterCompleteEx(
  [in] NDIS_HANDLE ProtocolBindingContext,
  [in] NDIS_STATUS Status
)
{...}

Parameters

[in] ProtocolBindingContext

A handle to a context area allocated by the protocol driver. The protocol driver maintains the per-binding context information in this context area. The driver supplied this handle to NDIS when the driver called NdisOpenAdapterEx.

[in] Status

The final status of the open operation for the underlying miniport driver. This status value is NDIS_STATUS_SUCCESS if the binding was established or any error status that the underlying driver determines.

Return value

None

Remarks

The ProtocolOpenAdapterCompleteEx function is required. A protocol driver calls the NdisOpenAdapterEx function from its ProtocolBindAdapterEx function. NDIS calls the driver's ProtocolOpenAdapterCompleteEx function after a pending open operation is complete.

If ProtocolBindAdapterEx is waiting for NDIS to call ProtocolOpenAdapterCompleteEx, this function can simply save the status and indicate that it has been called (for example, it can update the ProtocolBindingContext context area). This allows the ProtocolBindAdapterEx function to complete the bind operation.

If the ProtocolBindAdapterEx function has not already done so, ProtocolOpenAdapterCompleteEx can allocate the resources that the driver requires for the binding.

If ProtocolBindAdapterEx returned NDIS_STATUS_PENDING, ProtocolOpenAdapterCompleteEx can call the NdisCompleteBindAdapterEx function to complete the binding operation. In this case, ProtocolOpenAdapterCompleteEx passes NdisCompleteBindAdapterEx the BindContext handle that NDIS passed to ProtocolBindAdapterEx. If the Status parameter indicates an error, ProtocolOpenAdapterCompleteEx can release binding resources that were set up in ProtocolBindAdapterEx.

NDIS calls ProtocolOpenAdapterCompleteEx at IRQL = PASSIVE_LEVEL.

Examples

To define a ProtocolOpenAdapterCompleteEx function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a ProtocolOpenAdapterCompleteEx function that is named "MyOpenAdapterCompleteEx", use the PROTOCOL_OPEN_ADAPTER_COMPLETE_EX type as shown in this code example:

PROTOCOL_OPEN_ADAPTER_COMPLETE_EX MyOpenAdapterCompleteEx;

Then, implement your function as follows:

_Use_decl_annotations_
VOID
 MyOpenAdapterCompleteEx(
    NDIS_HANDLE  ProtocolBindingContext,
    NDIS_STATUS  Status
    )
  {...}

The PROTOCOL_OPEN_ADAPTER_COMPLETE_EX function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the Use_decl_annotations annotation to your function definition. The Use_decl_annotations annotation ensures that the annotations that are applied to the PROTOCOL_OPEN_ADAPTER_COMPLETE_EX function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.

For information about Use_decl_annotations, see Annotating Function Behavior.

Requirements

Requirement	Value
Minimum supported client	Supported in NDIS 6.0 and later.
Target Platform	Windows
Header	ndis.h (include Ndis.h)
IRQL	PASSIVE_LEVEL

Delen via