PROTOCOL_CM_REG_SAP callback function (ndis.h)

Artikel
10/21/2021

The ProtocolCmRegisterSap function is a required function that is called by NDIS to request that a call manager register a SAP (service access point) on behalf of a connection-oriented client.

Note You must declare the function by using the PROTOCOL_CM_REG_SAP type. For more information, see the following Examples section.

Syntax

PROTOCOL_CM_REG_SAP ProtocolCmRegSap;

NDIS_STATUS ProtocolCmRegSap(
  [in]  NDIS_HANDLE CallMgrAfContext,
  [in]  PCO_SAP Sap,
  [in]  NDIS_HANDLE NdisSapHandle,
  [out] PNDIS_HANDLE CallMgrSapContext
)
{...}

Parameters

[in] CallMgrAfContext

Specifies the handle to a call manager-allocated context area in which the call manager maintains its per-open AF state. The call manager supplied this handle to NDIS from its ProtocolCmOpenAf function.

[in] Sap

Pointer to a media-specific CO_SAP structure that contains the specific SAP that a connection-oriented client is registering.

[in] NdisSapHandle

Specifies a handle, supplied by NDIS, that uniquely identifies this SAP. This handle is opaque to the call manager and reserved for NDIS library use.

[out] CallMgrSapContext

On return, specifies the handle to a call manager-supplied context area in which the call manager maintains state about this SAP.

Return value

ProtocolCmRegisterSap returns the status of its operation(s) as one of the following:

Return code	Description
NDIS_STATUS_SUCCESS	Indicates that the call manager successfully allocated and/or initialized any necessary resources to register and maintain the SAP. In addition, it also indicates that the SAP was registered successfully as required by the network media that the call manager supports.
NDIS_STATUS_PENDING	Indicates that the call manager will complete the processing of this request asynchronously. Call managers must call NdisCmRegisterSapComplete when all processing has been completed to signal NDIS that the registration is finished.
NDIS_STATUS_RESOURCES	Indicates that the call manager was unable to allocated and/or initialize its resources required to register the SAP on behalf of the connection-oriented client.
NDIS_STATUS_INVALID_DATA	Indicates that the specification provided at Sap is invalid or cannot be supported.
NDIS_STATUS_XXX	Indicates that the call manager encountered an error in attempting to register the SAP for the connection-oriented client. The return code is appropriate to the error and could be a return code propagated from another NDIS library function.

Remarks

ProtocolCmMakeCall communicates with network control devices or other media-specific agents, as necessary, to register the SAP, as specified at Sap, on the network for a connection-oriented client. Such actions could include, but are not limited to communicating with switching hardware, communicating with a network control station, or other actions that are appropriate to the network medium.

If a call manager is required to communicate with networking control agents (in other words, a network switch) it should use a virtual connection to the network control agent that it established in its ProtocolBindAdapterEx function. Stand-alone call managers communicate through the underlying miniport driver by calling NdisCoSendNetBufferLists. Miniport drivers with integrated call-management support never call NdisCoSendNetBufferLists. Instead, they transmit the data directly across the network.

In addition, ProtocolCmRegisterSap should perform any necessary allocations of dynamic resources and structures that the call manager needs to maintain state information about the SAP on behalf of the connection-oriented client. Such resources include, but are not limited to, memory buffers, data structures, events, and other such similar resources. A call manager must also initialize any resources it allocates before returning control to NDIS. Call managers must store the NDIS-supplied handle identifying the SAP, provided at NdisSapHandle, in their context area for future use.

If ProtocolCmRegisterSap will return NDIS_STATUS_SUCCESS, it should, after allocating the per-SAP state area, set the address of this state area in CallMgrSapContext before returning control to NDIS. To do this, dereference CallMgrSapContext and store a pointer to the data area as the value of the handle. For example:

*CallMgrSapContext = SomeBuffer ;

If the given SAP that is already registered by another connection-oriented client, the call manager must fail the request and return NDIS_STATUS_INVALID_DATA.

After a call manager has registered a SAP on behalf of a connection-oriented client, it notifies that client of an incoming call offer directed to that SAP by calling NdisCmDispatchIncomingCall.

Examples

To define a ProtocolCmRegisterSap function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a ProtocolCmRegisterSap function that is named "MyCmRegisterSap", use the PROTOCOL_CM_REG_SAP type as shown in this code example:

PROTOCOL_CM_REG_SAP MyCmRegisterSap;

Then, implement your function as follows:

_Use_decl_annotations_
NDIS_STATUS
 MyCmRegisterSap(
    NDIS_HANDLE  CallMgrAfContext,
    PCO_SAP  Sap,
    NDIS_HANDLE  NdisSapHandle,
    PNDIS_HANDLE  CallMgrSapContext
    )
  {...}

The PROTOCOL_CM_REG_SAP function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the Use_decl_annotations annotation to your function definition. The Use_decl_annotations annotation ensures that the annotations that are applied to the PROTOCOL_CM_REG_SAP function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.

For information about Use_decl_annotations, see Annotating Function Behavior.

Requirements

Requirement	Value
Minimum supported client	Supported for NDIS 6.0 and NDIS 5.1 drivers (see ProtocolCmRegisterSap (NDIS 5.1)) in Windows Vista. Supported for NDIS 5.1 drivers (see ProtocolCmRegisterSap (NDIS 5.1)) in Windows XP.
Target Platform	Windows
Header	ndis.h (include Ndis.h)
IRQL	<= DISPATCH_LEVEL

Delen via