PROTOCOL_CL_ADD_PARTY_COMPLETE callback function (ndis.h)

Artikel
10/21/2021

The ProtocolClAddPartyComplete function is required for connection-oriented NDIS clients that set up multipoint connections. Such clients must have ProtocolClAddPartyComplete functions to complete the asynchronous operations that they initiate with NdisClAddParty. Otherwise, such a protocol driver's registered ProtocolClAddPartyComplete function can simply return control.

Note You must declare the function by using the PROTOCOL_CL_ADD_PARTY_COMPLETE type. For more information, see the following Examples section.

Syntax

PROTOCOL_CL_ADD_PARTY_COMPLETE ProtocolClAddPartyComplete;

void ProtocolClAddPartyComplete(
  [in] NDIS_STATUS Status,
  [in] NDIS_HANDLE ProtocolPartyContext,
  [in] NDIS_HANDLE NdisPartyHandle,
  [in] PCO_CALL_PARAMETERS CallParameters
)
{...}

Parameters

[in] Status

Specifies final status of the client-initiated add-party operation, which can be one of the following:

NDIS_STATUS_SUCCESS

The given party was added on the client's active multipoint VC.

NDIS_STATUS_RESOURCES

NDIS could not allocate sufficient resources to track the new party.

NDIS_STATUS_FAILURE

The client passed an invalid NdisVcHandle to NdisClAddParty.

NDIS_STATUS_XXX

The call manager's ProtocolCmAddParty function returned a CM-determined value to indicate why it could not add the party to the VC.

[in] ProtocolPartyContext

Specifies the client-supplied handle originally passed to NdisClAddParty.

[in] NdisPartyHandle

If Status is NDIS_STATUS_SUCCESS, this NDIS-supplied handle represents the association between the call manager and client regarding this party. Otherwise, the attempt to add a party failed and the client should consider this parameter an invalid handle.

[in] CallParameters

Pointer to a structure of type CO_CALL_PARAMETERS, originally set up by the client for its call to NdisClAddParty but possibly modified subsequently by the call manager.

Return value

None

Remarks

A call to ProtocolClAddPartyComplete indicates completion of the asynchronous operation initiated when the client called NdisClAddParty. If the input Status is set to anything other than NDIS_STATUS_SUCCESS, ProtocolClAddPartyComplete can release or reuse the client-allocated buffers at ProtocolPartyContext and at CallParameters .

If the attempt to add a party succeeded, ProtocolClAddPartyComplete should save the input NdisPartyHandle for subsequent calls to NDIS library functions concerning this party in the client's ProtocolPartyContext area. For example, the client must pass this handle in a subsequent call to NdisClDropParty eventually unless the remote party that it represents closes its connection first.

The structure at CallParameters originally was allocated and initialized by the client, which passed this pointer to
NdisClAddParty. However, the call manager might have modified the client-supplied values to reflect the results of the CM's negotiation with the network or with a signaling peer while processing the client's add-party request. To determine whether the call manager made any modifications, ProtocolClAddPartyComplete can check the Flags member of this structure for whether CALL_PARAMETERS_CHANGED is set. If so, ProtocolClAddPartyComplete must update the per-party state that the client maintains for this call at ProtocolPartyContext unless it finds the CM's modifications unacceptable. The particular signaling protocol determines what the client can do in this case. Usually, a client calls NdisClDropParty if it finds the CM-modified call parameters unacceptable.

Depending on the signaling protocol of the call manager, the traffic parameters at CallParameters can be identical for all parties on any particular multipoint connection. That is, as the client of such a call manager adds parties on a multipoint connection that the client originally set up with NdisClMakeCall, it can supply only the target address of each party and leave the traffic parameters as originally set up for the multipoint VC each time it calls NdisClAddParty.

Examples

To define a ProtocolClAddPartyComplete function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a ProtocolClAddPartyComplete function that is named "MyClAddPartyComplete", use the PROTOCOL_CL_ADD_PARTY_COMPLETE type as shown in this code example:

PROTOCOL_CL_ADD_PARTY_COMPLETE MyClAddPartyComplete;

Then, implement your function as follows:

_Use_decl_annotations_
VOID
 MyClAddPartyComplete(
    NDIS_STATUS  Status,
    NDIS_HANDLE  ProtocolPartyContext,
    NDIS_HANDLE  NdisPartyHandle,
    PCO_CALL_PARAMETERS  CallParameters
    )
  {...}

The PROTOCOL_CL_ADD_PARTY_COMPLETE function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the Use_decl_annotations annotation to your function definition. The Use_decl_annotations annotation ensures that the annotations that are applied to the PROTOCOL_CL_ADD_PARTY_COMPLETE function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.

For information about Use_decl_annotations, see Annotating Function Behavior.

Requirements

Requirement	Value
Minimum supported client	Supported for NDIS 6.0 and NDIS 5.1 drivers (see ProtocolClAddPartyComplete (NDIS 5.1)) in Windows Vista. Supported for NDIS 5.1 drivers (see ProtocolClAddPartyComplete (NDIS 5.1)) in Windows XP.
Target Platform	Windows
Header	ndis.h (include Ndis.h)
IRQL	<= DISPATCH_LEVEL

Delen via